used W P Weighing machines

A used dough cradle W&P Parta U with stainless steel cladding is currently for sale and immediately available in our warehouse in Bielefeld. Dough divider WP Parta U - with 1 chamber - Stainless steel clad - Weight range: 300 grams to 2800 grams - Hourly output: 925 to 1050 pieces - the dough divider is in baker's condition

Baker Perkins Dough Weigher Type: Accurist 2 Divider Year of construction 2010 Stainless steel version Dough temperature sensor Dough level sensor Leak-out flicker for sticky dough / low weights Primary and secondary conveyors for separating dough pieces Hourly power min: 1200 pcs/h Hourly output max. 5400 pieces / h Weight range: 500 - 1650 grams Industrial dough weighers Touch panel control on rolls 400V 50Hz Can be linked to other machines Height: 190cm Width: 210cm Depth: 150cm

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009 Sale exclusively to traders or export! We have more than 400 bakery machines and more than 300 ovens permanently in our warehouse in Bielefeld. Multiback Bakery Technology Artur-Ladebeck-Straße 171 Bielefeld

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009

Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.

Dough pre-portioner W&P for WP BV-700 dough dividing machines - Dough pre-portioner from WP Haton - for WP BV 700 dough dividing machines / dough weighers - with pedestal and ladder - in stainless steel - Year of construction 2014

WP-Kemper Quadro Filius with three cutting tools, diamond stumblers, tools for triangular rolls and seeding station. Item condition: maintained Availability: immediately

W&P dough weighers Type: SN Year of construction 1994 Weight range: 200- 1200gram with discharge conveyor analog control Stainless steel cladding on castors Height: 170cm Width: 150cm Depth: 80cm

Used dough weigher W&P, type: Tewimat TWL6 -In bakery condition- - 6 rows - Double piston 48/36mm - Condition: good, all components run without deviations - Capacity: approx. 17,000 pcs./h - Dough weight range: approx. 28 - 125g -El. Connection: 400 V, 50 Hz, 12 / 20 A Visits and test runs are possible by arrangement.

Dough Dividing Machine Weigher Werner & Pfleiderer Model: Parta U Fully automatic dough dividing machine Range 300 to 2100 grams Conveyor belt 725 mm Central lubrication Hopper 170 ltr. Mechanical weight adjustment Stainless steel Output 925 pcs/Std. max. Machine mobile with brake Connection 400V, 1.6 kW, 16A-CEE plug Used machine cleaned 2021 Refurbished

Werner and Pfleiderer Weigher/Dough Divider Type V300 (1500) Year of construction 2009 Output approx. 1,500 pieces/h with lubrication Weight range 200 – 1.800gr suitable for wheat, mixed wheat and mixed rye doughs with stainless steel funnel for approx. 200kg dough Stainless steel cladding

Used dough weigher W&P, type: Parta U 2002 -in used condition- - Condition: Good, technically tested, ready for immediate use Viewing and test run are possible by arrangement.

Posiweigh Triple200 Three lane linear weighing line Serial: 3054 2015, never been in production, weighing capacity up to 1000grams, suitable for dry, free flowing granular or piece type products, hopper capacity 120l, weighpan capacity 5l, two different discharge chutes for single drop of treble drop, comes with vibratory conveyor with 500kg hopper then feeds onto flighted elevator conveyor that feeds into the linear weigher and finally discharges onto a 3m indexing conveyor, supplied with a set of stainless steps, 1Ph

Make : TREPKO Model : PKG 1S Cups : 8 Circles pre Minute : 32-40 Cup Sizes : 75 and 95mm Filling Volume : 50gr -500gr Stations : Cup denester - Filling - Aluminium Placing - Heat Sealing - Conveyor Condition : Good HEPA Filter Mounted Closed Cabin Safety Switches Control Panel Available : Immediately

Flexipak Refurbished 3 years ago Speed : 1800 c/h on 125 g Cup dimensions : 73mm and 95 mm Comprises pot drop, liquid fill, lid drop, heat seal, over lidder Motorised 3 metre conveyer Heated 30 litre feed tank with stirrer.

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Poly Clip SCD 7095 pneumatically operated single-clipper for all artificial and natural casings, bags and nets. The machine is immediately available and can be tested in Koblenz, Germany.

Case label printer with topdown applicator and electric conveyor. Device is CE compliant.

Drilling capacity in steel/GG: 23 mm spindle retainer: 2 MK projection: 300 mm table size: 300 x 300 mm Quill stroke: 100 mm spindle speeds: 190-1500 rpm drive motor: 380 V, 0.5/0.75 kW space: 410 x 670 x 1950 mm weight: 180 kg

Poly Clip Single-Clipper, suitable for artificial and natural casings, bags and nets The machine is immediately available and can be tested in Koblenz, Germany.

Poly Clip Single-Clipper, suitable for artificial and natural casings, bags and nets The machine is immediately available and can be tested in Koblenz, Germany.

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.