We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Circular saw sharpening machine Vollmer Cne
used
Circular saw sharpening machine Vollmer CNG
used
Suitable to sharpen automatically the face and top on carbide tipped circular saw blades in one, set-up. The complete machining hook angle, clearance angle, top and blade body in one single clamping Accessories:, Total enclosure,, Coolant system,, Automatic fire extinguishing device,, Alphanumeric plug-in keyboard for data management,, Machine light,, Extractor,, Measuring probe,, Saw diameter: 80-840mm, Bore diameter: from 10 mm, bore diameter: from 10 mm, sheet thickness:
used
Suitable for automatic, double-sided tooth flank grinding on carbide-tipped circular saw blades. Accessories: Wet grinding device, Automatic central lubrication Hydraulic saw blade clamp, Circular saw blade outer diameter: 80 to 840 mm, Tooth pitch: up to 100 mm, optionally up to 180 mm, sheet thickness: up to 8 mm, tangential relief angle: up to 8°, Tangential clearance angle: up to 8°, radial relief angle: -10° to 6°, Radial clearance angle: -10° to 6°, grinding path: up to 16 mm, Grinding path: up to 16 mm, Grinding wheel diameter: 80 to 100mm, Grinding wheel bore diameter: 32 mm, peripheral speed: approx. 18-27 m/s, Circumferential speed: approx. 18-27 m/s, Connected load approx.: 3.6 kW (400 V / 50 Hz), Dimensions W x D x H approx.: 1980 x 1900 x 2000 mm, Weight approx: 1670 kg, colour: turquoise
used
Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM-tipped circular saw blades. Accesories: Total enclosure,, Hollow face grinding device,, Motorized adjustment of the rake and clearance angles,, Automatic central lubrication,, Grinding mist extractor with multi-stage filter,, Machine lamp,, 1 sawblade holder,, 1 grinding wheel mount., Circular saw blade diameter: 80-810mm, Circular Saw Bore Diameter: from 10 mm, blade thickness: up to 8 mm, Tooth pitch: 6 -120mm, rake angle: - 30° to +50°, clearance angle: 5° to 45°, tooth height difference: any, Bevel cut on the back of the tooth: up to 45 °, Working speed: up to 20 teeth / min., Grinding wheel diameter: 32 mm, Connected load: 4kW (400V / 50Hz), Weight approx.: 1110 kg, Dimensions W x D x H =: 1860 x 1267 x 1970 mm, colour: Gray
used
No. 1251: 1 gebr. Saw blade grinding machine Fabr. FULL, type CHHT 20 H, Bauj. 1984 with coolant device
used
Automatic machine for circular and gang saws, make VOLLMER type AT 500Built in 1961Technical specifications:Frame saws: any sizeCircular saw outer diameter: 120 - 800 mmTooth pitch: 12 - 80 mmTooth height: from 5 mm upwardsSheet thickness: 0.8 - 3.5 mmCabinet on each side: 0.3 - 1.5 mmWorking speeds: 16 teeth / minConnected load: 0.55 kWDimensions L x W x H: 1000 x 600 x 1200 mmWeight approx: 800 kglittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Saw blade diameter: 80 – 840 mm Saw blade thickness: 14 mm Bore diameter: 10 - 220 mm Pitch: 8 – 120 mm Cutting angle: - 35 + 40 ° Clearance angle: 5 -45 ° Machine dimensions WxLxH: 2295 x 1743 x 2050 mm Machine weight: 2.000 kg
used
total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
used
total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
used
used
Gate Sharper Manufacturer Vollmer for Inclined and straight ground
used
Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...
used
HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA
used
Suitable for automatic grinding of HM circular saeblades on chest and jerks in one clamping. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in one drain. Condition: Completely rebuilt, diameter extended, repainted. Up to the diameter of 1600 mm ! â?¢ Full cladding â?¢ Set-up for central cooling agent connection â?¢ Device for central suction â?¢ Automatic central lubrication â?¢ Grinding wheel holder â?¢ 2 magnetic saege leaf holders â?¢ Centering rings, - huelsen â?¢ Saegeleaf thickness: up to 14 mm
used
HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA
used
CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure,, Software path management,, Software end mill (207/208),, Software disc-shaped workpieces on the front side (221/222/223/224),, Software profiled workpieces (233/234/239/240),, Software hogger, hogger profiled (255/256/257/258/260/261/262/263), Software for disc-shaped workpieces (264/265),, Software for end and joint milling cutters (267/268/277/278),, Software step tools (271),, Software scoring saws (299),, Software saws flat tooth (301), Software saws one sided with bevel (302/303),, Software saws alternating teeth (304),, Software saws trapezoid trapezoid tooth (309),, Software saws flat roof tooth (310),, Software saws flat-tra ...
used
Suitable for automatic grinding of tooth faces and tooth backs on carbide-tipped circular saw blades., Accessories:, Total enclosure including coolant system,, Motorized setting of the rake and clearance angle,, Preselection of the direction of rotation of the grinding wheel and automatic change of direction of rotation,, Grinding speed and grinding path stepless adjustable,, Operating system modified Windows version,, Storage of approx. 4,000 programs possible,, Standard software package for tooth geometries according to the program overview,, Program for grinding saw blades with group teeth, with different tooth geometries,, Program for newly fitted and broken teeth,, Software package for multi-surface machining on the positive chip and flank face,, oscillating grinding on the face and top,, Automatic grinding wheel compensation,, Automatic central lubrication,, Feed pawl 2 mm,, 1 sawb ...
used
Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Automatic loading system HS # 172 (workpiece weight up to 5 kg, stack height up to 180 mm),, Automatic set-up of the machine (automatic saw infeed axis, saw stop for diameter control, audio probe Measuring device for automatic probing, etc.),, Standard software package for tooth geometries after tooth shape summary,, Software for grinding saw blades with group teeth, with different tooth geometries,, Software for replaced and broken teeth,, Data entry station for the sawblade data, with touchpanel,, Device for internal coolant supply using oil,, Coolant collecting pan including grids for the machine,, Coolant co ...
used
This VOLLMER QW72 P Erosion machine was manufactured in the year 1997 and has 91446 operating hours. It is equipped with a VOLLMER PMC-System control unit. The machine has a spindle speed of 4000 rpm.
used
Disc eroding machine for complete machining of rotationally symmetrical workpieces with ultra-hard cutting edges cutting materials. The workpieces are picked up flying (hanging vertically). Accesories Mechanical vapor separator N280, Disc changer for up to 6 eroding/grinding discs Adaptation to the A-axis on HSK 63-A-E Test mandrel HSK63A Glass scales on the linear axes X, Y & Z, Software package additional functions for metal working tools, Ex Level Pro Software, 3 grinding wheel changing elements Automatic shutter, Automatic central lubrication, Automatic fire extinguishing device, Coolant system with pump & coolant unit., Workpiece outside diameter: max 320 mm, Workpiece length: Max. 250 mm, workpiece length: max. 250 mm, Tool outside diameter: Max. 200 mm, Bore diameter: Max. 60 mm, bore diameter: Max. 60 mm, Travel X1: 520 mm, Travel path X1: 520 mm, Travel Y1: 970 mm, Travel path Y ...
used
Disc eroding machine for complete machining of rotationally symmetrical workpieces with ultra-hard cutting edges cutting materials. The workpieces are picked up flying (hanging vertically). Accesories: Mechanical vapor separator N280, Disc changer for up to 6 eroding/grinding discs, Adaptation to the A-axis on HSK 63-A-E Test mandrel HSK63A, Glass scales on the linear axes X, Y & Z, Software package additional functions for metal working tools, Ex Level Pro Software, 3 grinding wheel changing elements Automatic closure flap Automatic central lubrication Automatic fire extinguishing device Coolant system with pump & cooling unit, Workpiece outside diameter: max 320 mm, Workpiece length: Max. 250 mm, workpiece length: max. 250 mm, Tool outside diameter: Max. 200 mm, Bore diameter: Max. 60 mm, bore diameter: Max. 60 mm, Travel X1: 520 mm, Travel path X1: 520 mm, Travel Y1: 970 mm, Travel pa ...
used
1 item Original full partial discs for gear (Cne and Cana/e) external diameter: 280 mm Bor: 150 mm Zaehne numbers: 20 / 42 / 48 / 54 / 56 / 64 / 72 / 78 / 100 / 110; good
used
Hand cabinets for gate saws Tsa
used
Hand cabinets for gate saws Tsa