used TORWEGGE Many sheet circular saws

Edging saw – single-blade saw Make Torwegge Type H321 Cutting width 164 mm Chain width 160 mm Main motor approx. 11 kW Cutting height 90 mm Weight approx. 1400 kg

Continuous plank gluing press Suitable for hardwood wood thickness: 11 to 45 mm. Max wood length 2600 mm Gluing bed length: 6 m. Cross-chain transport Angle transfer and loading in the press with side glue, PVAc glue press with bed 1.58 x 10 m., hot water heated, Bohqqiku Hydraulic unit with 15 kW, v-outlet saw cross saw with running Mechanization available for sizing Disrun Vakumm Stacking Device

Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. === English === Technical data are partially estimated. Actual values may vary

Heating bed length 3m Wood types FI, AI, LÄ, DG, ZI L-lamella width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target power/shift: 1500 average. Up to 2000 m2 / SCHICHT 1273 - 2073 mm 1500 average. Up to 2000 m2 / S

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. === English === Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring ...

Torwegge H293 is a special machine. The panel length of the machine is 2.65 m. – the panel width is 10 m.- the panel thickness is from 10mm to 50mm.

With documentation, the machine was functional until the end, a few parts would have to be replaced, an inspection is possible.

Max. pallet dimensions: 1200x800x2400mm, max. load: 260kg, roller diameter: 50mm, length: 12,000mm.

Technical specifications: Year of issue - 1 979 Conveyor width, 250 mm Cutting height, 100 mm Main engine, kW 50 Engine power, 1.5 kW Speed of rotation of a saw shaft, rpm 4600 Max. diameter of a saw disk, mm 340 Landing diameter, 70 mm Weight, 2500 kg

Double-end tenoner Torwegge Working width 3000 mm per side: 2 x shredders swivel 3.7 kW at 50 Hz/5.5 kW at 100 Hz complete with converter Chain transport with cams

Manufacturer: Torwegge, Type: 8010, Year: 1998, Maschinensteuerung: yes, Motore Maschine 1: 4 +4, Conveyor: 1 Kettenmaschine, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 6-30, Working width min-max mm: 80, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: 10-40, Feed stepless: yes, Overall milling units: 4+4, Moulding units swivel-mounted: 4+4, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 4,5/5800, 2nd milling unit kW / rpm: 4,5/5800, 3rd milling unit kW / rpm: 4,5/5800, 4th milling unit kW / rpm: 4,5/5800, Year :1998

Manufacturer: Torwegge, Type: H634.1, Year: ca. 1996, Year :ca. 1996

max workpiece width: 2500 mm max thickness: 150 mm Feed by chain track Top pressure by belts Equipment: 1+1 Saw motor 7,5 kW

Much sheet saw with Electr. Width adjustment from 1 sheet Chain width 250 mm unit 220 mm cutting height of 150 mm 15 kw motor

Raimann ProfiRip KR 310 M My. 2004 Multi-blade rip saw with 2 adjustable saw blades Track width 340 mm Total - passage width max 950 instead of 800 mm Cutting height with / without pressure board 115/130 mm Workpiece length 450 mm min Saw blade max. diameter 380 mm Saw blade min. diameter 250 mm Saw blade bore 80 mm Saw spindle diameter 65 mm Saw spindle speed 3900 rev / min Engine 30 kW Laser - directional lights 3 pc. Operating push 6 bar Infinitely variable feed - speed 8-48 m / min. 1.5 kW Weight 3400 kgs Voltage 400V/50Hz

WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Crawler multi-rip saw RAIMANN K23 250/120 moving saw – after the technical inspection – Perfect condition – DTR documentation – movable disc with fixed sleeve TECHNICAL PARAMETERS: .max. cutting height 120 mm .max. cutting width 250 mm main motor 30 kW feed motor 1.1 kW feed speed from 5 – 50 m/min .max. blade diameter 350 mm sleeve diameter 80 mm shaft diameter 60 mm movable disc Min. material length 500 mm working table dimensions 800 mm x 1750 mm three rows of anti-ejection pawls feed adjustable on geared motor central lubrication Four pressure rollers from above dimensions of the machine (length/width/height): 185 / 150 / 220 cm weight 1850 kg

Socolest DAS 200 double shaft multi rip saw infeed and outfeed table - Italian production - centering feeding table - Dump receiving table - upper pulling rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - motor power 2 x 55 kW - track width 630 mm - diameter of discs max 350 mm - feed speed 40 m/min - Hydraulic height adjustment of the shafts - Hydraulic cutting height adjustment - hydraulic feed - Four upper pulling rollers - Four rows of anti-kickback latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side centring clamp - diameter of stub pipes 2 x 250 mm - minimum workpiece length 720 mm -laser - belt feeding table 5700 mm - table width 600 mm - pneumatic pressure roller - table speed adjustable on the inverter - take-up table 9200 mm - roll width 800 mm - roll diameter 135 mm - Four d ...

Raimann VarioRip with mechanization! Max. cutting width 310 mm Chain width 340 mm Max. passage width / inlet width 650 mm Max. cutting height with clamping flanges 110 mm Max. cutting height 100 mm Min. wood length with use of the printing board 410 mm Feed speed 5 – 35 m/min Engine power 37 kW Number of printing rollers 4 Saw blade diameter min. / max. 300 mm / 350 mm Weight 2,060 kg Dimensions length x width x height 1.75 x 1.75 x 1.87 m Working height 850 mm Zciesgbg Suction diameter 250 mm Required extraction speed 30 m/sec Required extraction volume 5,300 m³/h

Raimann KR 310 E 340/120 multi-saw with movable disc - German production - year of production 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum element length 700 mm - table width 740 mm - feed adjustable on the inverter 6-48 m/min - three rows of pawls - possibility of putting on a shoe - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electric cutting height adjustment - electric shaft height adjustment - four upper pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Machine dimensions 250x200x220 cm weight 2000 kg

Tools are included Well equiped, good condition Shafts diameter mm. 50

Sahinler HPK 40 Profile Bending Machine Many tools are included(Pipe bending tool diameter between 10-42 mm and profile bending tool between 10x10 - 40x40 ) Machine is in very good condition

LVD Parma 1212 TK CNC Punch Press 20 Ton Many tools are included Machine is in good working condition

Durma PP 1250x30 CNC Punching Machine Maximum steel thickness : 6 mm Stroke : 30 mm Number of stroke per minute : 600 Max X axis 2000 mm movement+Automatic reposition Mad Y axis movement (MUTLITOOL) 1250 mm Metalix control Table size 2400 x 3600 mm Metalix program Many tools are included Machine is in very good condition

Consistent precision when bending due to 3-point technology and pressure distribution via hydro cushion. Very good maintained condition. Has always been serviced regularly and annually by the company Bystronic (service reports are available). Servomotors were exchanged. Still some spare or wear parts new with it.