used TECHNOLOGY Punching Machines

Technology Italiana Tecnotransfer 15 SR punching machine year 2004

Vibratory dust collector combined with a Lock combi Li metal detector Product: tablets 4 - 25 mm Brand : Pharma technology Model: 500 Year: 2002 Conveyor speed : adjustable Power supply : 230 V Brand : LOCK INSPECTION SYSTEMS Model : MET 30+ Power supply : 230 V Ejector for non-conforming products. Technical information: Combi 500 Li Adjustable output height (B) 760 mm Tablet inlet size 120 x 35 mm Tablet outlet ? 52 mm Min. tablet size ? 4 mm Max. tablet size ? 25 mm Adjustable conveying speed Average conveying time +/- 60 sec Required suction connection 200m3/H-WS 200 mm Suction connection ? 52 mm Metal detector passage dimensions: 95 x 38 mm Examples of output rates : Round tablets ? 6 mm 2 000 000 compr./H Round tablets ? 8 mm 500 000 tablets /H Round tablets ? 13 mm 320,000 compr./H 8mm x 4mm oblongs 500 000 compr./H 19mm ? 7mm slotted tablets 150, ...

Tablet dedusting unit Brand: Pharma technology Model: 1200 S Conveyor speed: adjustable Elevation height: 1200 mm Power supply: 230 V Control module: metal detection Brand: Safeline Model: Tab/ex Year : 2005 Power supply: 230 V Ejector valve for non-conforming products.

Pharma Technology DV1300 +VC vertical tablet/capsule deduster, output 50,000 to 2,000,000 pieces/hour.

Technical specifications: automatic raw water supply: Exchange pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.5: 7.5 kWVorfiltration: Selbstreinigender filter with automatic SteuerungFilterfeinheit: 300 µmMaximaler flow rate: 40 m ³/hFlockungsstufe: flocculation tank: 2 x 0,5 m³ (material PP) charging pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.0: 5.5 kWRührwerke FlockungsbehälterDosierstelle for flocculant: static mix / Rohrflockulator (material PP) ) Ultrafiltration: number of UF modules: 8 Stck.Modulanordnung in the rack (x-series): 2Filterfläche of the UF modules: 60 m ² Backwashing and chemically supported backwash: Backwashing medium frequency-controlled RÃ&fr ...

A mobile ultrafiltration system is sold in a 20ft container with equipment: - Ultrafiltration modules type dizzer CL (Inge GmbH) - Backwash template 2.6 m3 - Pre-filter 300 ?m - Measurements for turbidity, conductivity and pH - PLC type T-Box for fully automatic control of the system - Operation of the system on site via touch panel as well as remote access via based visualization - automatic chemical dosing Additional additional modules can be purchased as an option: - 20ft expansion container with 12 additional UF modules - 20ft container with sewage and neutralization tank

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

Max. output: 15t/h, length: 2753mm, width: 2515mm, height: 2438mm.

working area: . mm material: . capacity: . Stück/h weight: 250 kg Machine number: 05.0501.01Nominal vacuum 0.5 h PAThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spreading machine Xls50 240cm width. Table 10m length included.

- Temperature range: in helium 2275 ° C - Combustion chamber diameter x height: 114 x 153 mm - Total power: 20 kW - Dimensions (W x D x H): 1.55 x 0.65 x 1.9 m - Machine weight: 640 kg - Condition: very good Details High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes

UV Technology UV Oven Stainless, Static multipurpose UV oven, this machine will allow products to be transferred from low care to high care, it uses four removable UV cassettes, it has two doors that open 180 degree to allow access for the product from both low and high care, aperture 500mm x 500mm, 3Ph

Maximum Diameter: 3000 mm // Minimum Diameter: 500 mm

Almost brand new homogenizer for stabilizing dairy / non -dairy products, juices, smothies, etc. Productivity - 500 l/h Homogenization stages 2 stage with pneumatic control Viscosity < 500 cps Maximum inlet particle sizes < 500 microne Steel AISI 304 Plungers 3 Pressure 0 - 40 Мpa (400 bar) including Inlet pressure 0,3 - 0,6 Mpa ( 3 - 6 bar) Max outlet back pressure up to 10 bar Compressed air Min. 5 bar, clean / dry, temp. ≤40°С Max working temperature < 100 ° С Max t° washing < 90 ° С Max t° sterilization < 145 ° С Motor power 11 kw, 3 + 380 V, 50 Hz Weight 650 кg Size 1200 х 800 х 1000 mm Noise level Max 60 db Cooling water consumption Max 80 L/hour

The machine is used in the pharmaceutical, chemical, metallurgical and food industries. Used as specialized material crushing equipment in the preparation process, it can crush hard and durable materials such as plastics. Working method The material is fed into the crushing chamber via the hopper; crushed by simultaneous cutting of fixed and movable knives and rotary knife impact; flows to the outlet automatically under the influence of a rotating centrifugal force. Mainly used for primary crushing or first processing of large size hard raw material. Constructed of SS304 stainless steel, meets the GMP standard

CELL COMPOSED OF: 2 MULTICONTACT GRINDING UNITS WITH 3 BELTS fully automatic with intelligent system, capable of maintaining the programmed working pressure constant. 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 1 UNIT mod. FLEXIBLE DISK The operation of the unit is governed and managed by the program of the robot 2 KAWASAKI RS50N ROBOTS each having a wrist capacity of 50 kg. Each robot is complete with: _ANTI-SPARK PROTECTION on the wrist; _TICKET INSPECTOR; _PNEUMATIC SYSTEM.

HJ-4S wide universal milling machine. Analog of SF-676 machine. New in stock in the city of Yekaterinburg The machine allows you to perform various operations: milling flat and shaped planes, drilling, tapping, centering, counterbore, boring, chiseling, marking and other types of work. The machine can machine parts of the most complex configurations in various materials and with high precision. It is possible to use a huge variety of tools and fixtures on the machine. Table with characteristics in the photo

Capacity up to 6 tons For more details contact with us

This Italian Technology Tecnumeric 30 C.S.M. 1000 Punching machine was manufactured in the year 2005. It is equipped with a Tecnology Italiana control unit. The machine has a punching force of 300 kN. CNC: Tecnology Italiana Punching force: 300 kN. X-Axis Movement: 1560 mm Stroke per minute: 310-480 Length: 1000 mm Maximum force/maximum punching force: 30t Number of tools: 8 Documentation: yes

Nijhuis Water Technology BV flotation washer, dimensions: 3800 mm x 2550 mm x 2500 mm. Incomplete.

The 10 kW two-station high-frequency welding machine is designed for welding two or more layers of plastics. The machine has two workstations, which allows two operators to work simultaneously. In this way, we can achieve very high efficiency in production. Movable working tables located on the sides of the machine allow easy and fast placement of moldings on the positioners. Thanks to specially designed electrodes, we can achieve a durable and aesthetic weld during a single working cycle. Welded materials PVC, PU, PA Power supply 3 400 VAC; 50 Hz Output power 10kW Generation lamp 3CX10000H3 Maximum welding area 250 cm2 Press force 1200 kg (0.6MPa) Table dimensions 800 mm x 650 mm Weight ~1200 kg

Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago. max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar. Material to be processed: welding and staple wire, max. tensile strength: 1600N/mm². Wire diameter: 0.8 - 1.0 - 1.2mm, tolerance on max. diameter: 0.05mm. Support: K300 - D300, weight of spools/wire baskets: 15 - 18 - 20kg, weight: approx. 3000kg, mit Dokumentation.

Stanze PAGUS Stanze punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used