used SENNEBOGEN Crawler excavators

Chain excavators Manufacturer Zeppelin / Sennebogen with hydraulic adjustable boom Gripper cable Joystick control Weight approx. 18,500kg Total width approx. 280cm Total height approx. 290cm Total length approx. 9m Landing chassis approx. 5m Bulldozer ready for use according to photos Special price

Sennebogen 850 E, Crawler R 70 / 490 Material Handling Machine:, Fire: Sennebogen, Model: 850 E crawler R70/490 special., Cab adjustment: E270 hydraulically elevating, Technical data:, Engine Power: 250kW, 400V, 50Hz., Service weight: approx. 63 t., Equipment: K 21, Operating hours: 9800 h, Year of construction: 2013, Lift capacity at 20 m reach: 5.9 t., fire: Sennebogen, Cab adjustment: E270 hydraulically elevating, Service weight: approx. 63 t., equipment: K21, Operating hours: 9800h, Year of construction: 2013

Chain excavator Liebherr R941B with sheet wall ram Technically fine Built in 1977

Hydraulic excavator chain excavator crawler excavator Manufacturer: Hyundai Type: ROBEX 280 LC Built ca.1999 6 cylinder four-stroke diesel engine Engine model: Cummins 6BT 5.9 / 128 hp Chassis length approx.: 4900 mm Cab height approx.: 3000 mm Chassis width: 3400 mm extra width quarry bog chain, chain width approx.: 810 mm Weight about 30 tons. Deep Spoon Oscar Meier AG Type ASM 100 Pinion repaired from the rotary gearbox and seals of rotary entry.

LIUGONG Crawler Excavator 925E

TECHNICAL SPECIFICATIONS Manufacturer: Liebherr Description: Mining Bagger / Tieflöffelbagger Type: R9150 - 1133 Litronic Year of construction: 2016 Bucket volume: 9.0 cbm Flow rate: up to 1,000 t/h Operating hours: approx. 10,000 h Engine: Liebherr V12 diesel engine, 565 kW / 1757 hp at (1,800 rpm) Displacement: 24.24 l Emission stage: EU Stage 2 / Tier 2 Hydraulics: 4 x Liebherr hydraulic pumps (total flow rate 2171 l/min) SPECIFIC COMMENT - 1133 undercarriage track 4.230 mm, wheel 5.2OO mm - Chains LH 1562; 2-web bottom plates 6OO mm - Monoblock boom 7.80 m with lifting cylinder - Bucket handle sealed 3.40 m with tilting cylinder ******************************************************** TECHNICAL SPECIFICATIONS Manufacturer: Liebherr Description: Mining excavator / Backhoe excavator Type: R9150 - 1133 Litronic Year of construction: 2016 Bucket volume: 9.0 c ...

with high bucket

239 kW, weight: 50.5 t, overhauled engine, as good as new undercarriage, new cylinder seal

TECHNICAL SPECIFICATIONS Manufacturer: PS Förder- und Lagertechnik (KW Kranwerke) Designation: Bucket chain excavator Type: PSZ-80L Year of construction: 1992 Design: Land-based on crawler chassis Flow rate: approx. 100 cbm/h Conveyed material size: approx. 0 - 16 mm Conveying speed: 44 m/min Conveying depth: max. 15 m Bucket capacity: 75 ltr. Number of buckets: 47 pcs. Length of lower bucket ladder: 22.0 m Upper bucket ladder length: 6.85 m Boom length: 14.0 m Boom lifting speed: 1.5 m/min Discharge belt length: 15.0 m Discharge belt width: 650 mm Discharge height conveyed material: 5.5 m Travel speed: 2 m/min Track width: 900 mm External dimensions of track: 4,100 mm Generator: LEROY-SOMER Diesel Three-phase Generator Set Generator type: LSA 4450 VL11 (100 kW / 125 kVA) Current type, frequency, speed: 400/230 V, 50 Hz., 1,500 rpm Engine: IVECO diesel engine  ...

We sell a Zeppelin ZR15 excavator as a spare parts carrier built in 1990 with Deutz engine F6L912, 74 kW. Spare parts from the excavator can also be purchased

ID3035 Caterpillar 374F LME year/Year of construction 2015 approx. 9800 hours/hours Mono boom, Cab protection grid, stick 2.55 ME Mass Excavator, central lubrication, lift cylinder protection, pipe rupture valves, Reversible fan manually, Löfflel 5.0 cbm KVX (floor is still being renewed), wear then 75% good, overall drive 70% good Mono boom, cabin protection grille, stick 2.55 ME Mass Excavator, central lubrication, lifting cylinder protection, pipe burst protection, reversible fan manual, spoon 5.0 cbm KVX (floor is still being renewed), wear condition then 75 % good, undercarriage over all 70 % good

SANY crawler excavator SY 215C from 2019, only 280 hours, machine was a DEMO machine, hammer & grab line, SW Verachtert CW 40, NLC, hydraulic pump Kawasaki, condition as good as new

If you are interested, feel free to write

NOTE: The attached pictures of this position are for documentation purposes only, the real pictures of the position will be created and attached in a timely manner!!

Liebherr handling excavator in top condition with HD suspension, balloon tires, gelaendefaehig! Type 932 Litronic HD HD chassis Weight approx. 37,000kg Built in 2001 magnetic system, automatic levelling at discontinuation, boom 7m, stem 5m, Preheater for motor oil and hydraulic oil. Strong lifting force, e.g. mobile without settling over 10,000kg. technically very good condition. optional accessory (available at an additional cost): G3pdl8ila Quick-change system Shovel for earth movement Magnet or swivel magnet Gripper for scrap Clamp for round material such as baeums or pipes Transport mass: Width 3,000mm Length without sti-steal6,000mm Transport height 3,560mm Former new price approx. 890.000.-DM Special price

Loading caterpillar Hanomag D 600 functional, top engine

350 Ton Crawler Crane “KOBELCO”, Model CKE4000C Mastertech (2007) Max. Lifting Capacity - 350 t /6.0 m Boom Length - 18 m to 78 m Main & Aux. winch Max . Line speed: 130 m/min (5th layer) Wire Rope: 28 mm Brake Type: Spring set hydraulically release brake Working speed Swing Speed: 1.3 min-1 {rpm} Travel Speed: 1.0/0.4 km/h Power Plant “HINO”, Model K13C-UV Engine Output: 295 kW/2,000 min-1 {rpm} Fuel Tank Capacity: 600 liters Hydraulic System Main Pumps: 6 variable displacement pump Max. Pressure: 31.9 MPa {325 kgf/ cm2 } Self-Erection Device Weights Operation Weight: Approx. 346 t Counterweight: Std. 120 t (Upper) + 41 t (Lower) Transport Weight: 60.0 t (Main machine) Ground Pressure: 150 kPa {1.52 kgf/cm2 } Make KOBELCO Year 2007 Capacity 350

fully functional HANOMAG bulldozer D 600 DS, Blade width 3.25 m, 13,770 Bh

Loader caterpillar manufacturer Liebherr, type LR634, year of construction 2007 Drive 80%, with pressurized cabin, operating hours: 6700 Ready for action...

Crawler Dumper Dumper 500kg with Ride-On Platform and Bucket NEW - Finally assembled in Germany Model: LP05 Length: 1150 Width: 648 Height: 515 Capacity: 0.2m³ Angel of dumping: 57°/47° Engine Model: Briggs & Stratton Fuel: gasoline Rated Power: 6.8Kw Rotation speed: 3000r/min Cylinders: 1 Hydraulic Motor: Large Torque Motor Dual Pump: Gear Pump System pressure: 16MPa System flow: 12ml/min Hydraulic Oil Tank Capacity: 19.4L Machine Operating weight: 600kg Loading capacity: 500kg Fuel tank: 5.5L Speed: 3.5km/h

ID2808 Menck 750 2870 hours/Stunden (accord. counterI 75 t Crawler crane, hydraulically controlled, approx. 30 m boom Crawler crane, hydraulically controlled, approx. 30 m boom

ID3143 Komatsu D37E-2 year/Year of construction 1986 5640 hours/hours Bulldozer, 6-way blade, blade width 2.30 m, 400 mm track plates, Komatsu engine Bulldozer, 6-way blade, blade width 2.30 m, 400 mm track plates, Komatsu engine

If you are interested, please contact us

For more information, please write to

Used, functional crawler loader. Fiat Allis FL 5 In need of repair. Seat, 2 windows broken.