used SCHIESS ROMI Engine Lathes Sliding Surfacing And Screw Cutting Lathes

Turning diameter: 430 mm Turning length: 1000 mm Turret positions: 0 CNC Brand: Siemens CNC Model: 828 D Romi - C420 Teach-in Cycle lathe Ø 420 x 1000 mm MACH - ID 6311 Make: Romi Type: C420 Control: Siemens 828D YOP: 2018 Hours: 192 Swing over bed Ø    430 mm Swing over cross slide Ø    200 mm DBC Turning Length      1.000 mm Spindle bore      53 mm Spindle power   9 kW Bed width       350 mm Tailstock spindle Ø     60 Ø Stroke pinole       120 mm Spindle taper       4 Mk Power     9 kW Speeds / ranges     4000 Rpm Feed rate X-Axis    10.000 mm Feed rate Z-Axis     10.000 mm Length    3.200 mm Wi ...

x-travel: 440 mm y-travel: 290 mm z-travel: 270 mm Control: Fanuc 21i-MB spindle turning speed range: 12000 U/min tool piece magazine with: 10 table-size: 500 x 320 mm distance table - lower edge spindle: 180 - 450 mm boring range:: dia 22 -26 thread: M 14 - M 20 workpiece weight max.: 150 kg spindle drive: 5,5 / 7,5 kW total power requirement: 12,5 KVA weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,2 x 2,2 x 2,3 m equipped with: - CNC control FANUC 21i-MB - tool changer 10-fold (Iso 30) - Internal coolant supply - coolant tank - chip box 2 machines available, 2nd machine without IKZ! - 1 Set of Tools for each machine - Working Hours: 16.000h Control On The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

* General * SKU068B368 * LocationBarneveld * MakeRomicon (filter) * TypeCTG 3 HF (Hollow Fiber) 21-75 PM-500 * Year of constructionunknown * Main Features * MaterialStainless steel * Specified Features - Miscellaneous filter * MaterialStainless steel * Filter/Rotary pump (1x) * Information * Mounted on wheelscheck * Floor space1,1x0,7 M * Total height2,1 M * Weight200 KG * Extra Specifications- Sanitary Rotary Pump make Nakamura Japan, type 25 VT-D Size 1,5 motor 0,75 KW, 220/380 Volt, with frequency inverter Miscellaneous filtersRomicon NakamuFilters > Miscellaneous filtersBrand > Romicon Nakamu What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Description: Turret head with 12 positions Counter spindle 6600 rpm Bar feeder capacity 51 mm turning diameter: 280 mm, Drehlänge: 400 mm, x-motion: 280 mm, y-motion: 85 mm, z-motion: 410 mm, control: Fanuk Series 18 I – TB, spindle bore: 58 mm, turning speed range: 6 - 6000 rpm, weight approx.: 6,300 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,900 x 2,000 mm

This Romi D 1000 vertical machine center was made in the year 2005 in Brazil. It is equipped with a CNC Fanuc series 21I-MB control unit and has 3 axis. The machine has a spindle speed of 6000 rpm. 2 available units.

3-Axis vertical machine center manufactured in 2015, the ROMI D600 features a Siemens 828D CNC control system, enhancing precision and ease of use. Its spindle speed reaches up to 8,000 rpm with an ISO-40 taper, and a tool capacity of 20, supporting efficient operation. The worktable measures 840 x 500 mm, handling a maximum weight of 800 kg. Ideal for demanding tasks, it also includes a chip conveyor for hassle-free maintenance. Consider the ROMI D600 machine we have for sale for reliable and robust machining solutions. Contact us for more details.

Face plate diameter: 1,600mm, orbital diameter 2,000mm, CNC control Siemens 805

Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998

Clamping claw box made of solid steel GR 9 (new) 4 pieces

Key data: 1250 mm, 1400 mm, 1150 mm

Digital Workpiece weight 8 t Crossbar adjustment 800 mm Chisel travel 700 mm Swivel angle max. 45 +/- degrees Special equipment: wet turning device, Fine-tuning chisel device, incl. accessories Machine weight approx. 13.5 t Space requirement approx. 3.4 x 5.8 x 4.5 m

Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)

Ref. -No.: 10361 Manufacturer: SCHIESS Year of construction: 2023 Type of control: CNC Control: Siemens, Heidenhain, Fanuc - Configurable as required Storage location: Halberstadt Country of origin: Germany financing: nach Anfrage Support sleeve diameter: 130 mm X-Travel: 3000 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Spindle stroke: 800 mm B-Axis: 360 ° W-Axis: 800 mm Spindle Taper: SK50 Max. Tool Weight: 25 kg Clamping Area: 1250 x 1250 (or configurable as required) mm T - groove width: 22 mm T - slot spacing: 160 mm Swivelling: Configurable as required ° Numbers Of Tools In Magazin: 40, 60, 120, 200, 240 Spindle Speed: 2900 RPM Max. Torque: 2500 Nm Drive Capacity - Spindle Motor: 41 kW

Technical data: The machine is completely overhauled in 2011 with new electrics, new wiring, including new control SIEMENS Sinumerik 840D max. circulating and turning diameter: 2,000 mm max. turning height: 1,500 mm Sheet disc diameter: 1,600 mm max. table load: 11.20 to. Cross-beam adjustment: 1,170 mm

Technical data: The machine is completely overhauled in 2011 with new electrics, new wiring, including new control SIEMENS Sinumerik 840D max. circulating and turning diameter: 2,000 mm max. turning height: 1,500 mm Sheet disc diameter: 1,600 mm max. table load: 11.20 to. Cross-beam adjustment: 1,170 mm

The SCHIESS RF 30 gear hobbing machine is a specialist machine for machining large gear wheels. The machine is designed for machining of gears by processing individual pitches of a gear wheel. The milling machine processes a workpiece with diameter from 60 mm to 3500 mm and a weight of up to 25 t. The spindle of the milling machine rotates at a speed from 6 to 69 rpm. The SCHIESS RF 30 machine is designed for milling with: – cylindrical milling cutters in steel / cast iron up to module: 24/30 – disc milling cutters in steel / cast iron up to module: 33/42 – end mills in steel / cast iron up to module: 33/42 50/65 Technical data of the SCHIESS RF 30 milling machine - largest diameter of the milled workpiece: 3500 mm - llargest diameter of the milled workpiece in the circumferential method and with tooth pitch up to 45 3000 mm - lsmallest diameter of the milled part: 60 m ...

Travel X / Y / Z 350/250/300 mm Table size 560 x380 mm C-axis 6-fold tool changer Hirschmann clamping system extinguisher

Table 486 x 280 mm, X/Y/Z = 300/200/300 mm

Jig

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

faceplate diameter: 2500 mm swing diameter: 3200 mm turning height: 3100 mm Control: R&D type: MTC 2x-2 workpiece weight: 20000 kg slide adjustment: 1600 mm side head - cross travel: 1000 mm Tool changer: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper: 2 x 40 ISA forward bearing diameter: 110 mm milling head speed: 100 - 4500 U/min milling drive: 5,1 kW workpiece length - max.: 830 mm taper diameter: 78 g6 mm centre height: 260 mm turning speed range - stepless: max. 15 U/min distance of spindles: 135 mm spindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mm Feed speed: max. 6 m/min. surface area: 200 x 1750 mm : tool post (Z-axis): stroke of tool slide: 120 mm Feed speed: max. 2 m/min. column movement: 200 mm : tail stock: tailstock quill stroke: 100 mm morse taper: 3 MK centre height: 260 mm axial distance of the quills: 135 mm passage of steadyrest: 40 - 80 mm control: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,20 x 2,66 x 1,76 m with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres,  ...

spindle diameter: 180 mm x-travel: 8000 mm y-travel: 4000 mm Control: Siemens type: Sinumerik System 3 ram: horizontal adjustment: 800 mm Spindle travel W-axis: 1400 mm ram: diameter: 220 mm engine output: 75 kW turning speeds: 900 U/min Plate area: 8000x6000 mm angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm turning height: 1500 mm turning diameter over bed: 2700 mm turning speeds: 1,9 - 60 (16x) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mm turning height: 1600 mm turning diameter over bed: 2150 mm turning speeds: 3,15 - 250 U/min voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.