We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
new
Scheppach – Roller screen RS 400 Name: Roller screen Manufacturer: Scheppach Type: RS 400 Article number: 42030000 Condition: Brand new The roll screen 400 does not let anything pass through that seems too coarse. It refines large quantities of different materials. The adjustable angle of inclination of the screening drum facilitates the screening of a wide variety of materials. - suitable for a wide variety of materials - Screen drum: Ø 400 mm, length 900 mm - Drum inclination adjustable in steps: 0-10 ° degrees - Mesh size: Ø 20 mm - Standard screen insert with mesh size 10 mm - Screen drum speed 42 rpm - Capacity: depending on the material 3m³/h Engine data: Voltage: 230V / (50Hz) Motor power: 360 W Machine dimensions (L x W x H): 1,060 x 710 x 1,400 mm Transport dimensions (L x W x H): 500 x 1,040 x 880 mm Number of packaging units: 1 carton ...
used
plunge sawing machine
used
Tested to work
used
Tested to work
used
Equipped with base: 60x50x85cm
used
Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Centrifugal fan, chip extraction fan, fan, suction, chip fan -Drive: 0.37 kW -Connection: Ø 100 mm -Connection: 380V -Dimensions: 400/600/H1200 mm -Weight: 28kg
used
Manufacturer: Scheppach, Type: DMT 8108, Peak width in mm: ca.1000 mm, Peak height in mm: ca.150, FREE TEXT: kw Leistung 0,75/6 Geschwindigkeiten 370/600/1000/1700/2700<CRLF>,
used
Table saw Scheppach 400 V 3.3 KW Blade diameter 600 mm Key Push poles Very little used.
used
Description: - Item number: 75060000 - Negative pressure: Diameter 63/58: approx. -28 mbar - Diameter 80 mm: approx. -27.5 mbar - Diameter 100: approx. -25.75 mbar - Pipe connection diameter: approx. 100 mm Approx. Onsite Dimension. (l x w x h): 1,400 x 500 x 1,650 mm, weight approx.: 100 kg
used
Compact table router Scheppach HF 3000 for profiling and milling wood., Tool ø: Max. 200 mm, engine: 3 kW
used
Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G &amp; HM-FS200S-STI
new
Weibert WJ-F50 Table milling machine NEW Safety rulers in the shaper fence strongly ribbed cast iron table 1100x900mm electrical height adjustment 200 mm 5.5 KW R + L barrel 3000 to 10000 U/1 Control Panel top Milling spindle can be exchanged Tool - diameter When profiling 275mm at the tenoning 400 m stable role statement WJ-600600 K 4 Special price:
used
Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine ...
used
Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm
used
Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Konturfrä�maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.
used
SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50
used
Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)
used
Table dimensions mm: 1000 x 900 With drive system
used
According to the PDF prospectus!
used
Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition
used
With feed and vacuum pump
used
--------------------
used
Machine type: Table milling machine Manufacturer: ELEKTRA BECKUM Model: TF 100 M 2.8 DN Built: 1998 Condition: ready for use Offer type: used machine Technical data: Table: 520 X 420 mm Speeds: 4000/6000/7500 rpm. Drive: 1.8 KW Comment: with an additional horizontal sawing unit (1.5 kW) for Two-sided machining with roller conveyor and lateral material guidance, everything can be easily dismantled Weight: 150 kg