used STROJARNE PIESOK Shears For Sheet Metal Working

Hydraulic Bending Machine Fabr. STROJARNE - PIESOK Type XONM 2000 / 2A - 2Machine -No: 237-516-1978, built in 1978Working length: 2050 mmMax. Sheet thickness: 2.0 mmbend to: 135 °Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower cheek: 100 mmStroke of bending beam: 100 mmDrive power: 2.2 kWWeight approx: 2800 kgExternal dimensions approx: 3000 x 800 x 1600 mmWith- Separate hydraulic system- adjustable bending angleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic folding machine make STROJARNE - PIESOK type XONM 2000/2Technical specifications:Working length: 2050mmMax. sheet thickness: 2.0 mmbend up to:135°Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower beam: 100 mmStroke of the bending beam: 100 mmDrive power: 2.2 kWWeight approx.: 2800 kgExternal dimensions approx.: 3000 x 800 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cutting length 3,050 mm. Max. thickness 6.3 mm St 235 There is a set of spare knives for the scissors The scissors are fully operational and are in use.

Machine in working condition

STROJARNE PIESOK XZMP 3150/6.3C 3-roll plate rolling machine built in Czechoslovakia in 1983 is designed for pre-bending and rolling sheet metal into cylindrical or conical covers and segments. The machine is distinguished by a fully welded structure with increased rigidity and three high-quality 300 mm diameter rollers with longitudinal grooves for easy alignment of the sheet. The bottom rollers, driven by a high-performance motor with two stages of rotation, allow for vertical repositioning during pre-bending and coiling, and also allow for an offset to an inclined position when the claw couplings are opened. As a result, each of the four lower roll bearings can be freely adjusted in the pitch range. The XZMP plate rolling machine has a control panel with a function to monitor the position of the lower rollers directly on the numerical indicators. The total weight of the STROJARNE  ...

Machine parameters: Max. cutting length: 3150 mm Max. sheet thickness: 6 mm Machine weight: 6800 kg The machine is in perfect condition after GO, the following was done: grinding of blunt knives, resealing of working cylinders and their flanges, resealing of holders and sections, replacement of polyurethanes, replenishment of nitrogen, electrical repair. (Current invoice proving the scope of work of course)

Machine in good technical condition. Machine weight: 5300 kg Max. circling length: 2000 mm Max. sheet thickness: 12 mm Diameter of the upper cylinder: 220 mm Diameter of the lower cylinder: 200 mm Encircling speed: 6.2 mm/min

Type: XZMP 3150/16 Parameters: 3150 mm, 16 mm Manufacturer: Strojárne Piesok Year of production: 1984 Location: Czech Republic Description: Max. bending length 3150 mm Max. plate thickness 16 mm Min. inner diameter of rounded tube 550 mm Rolling speed 7 mm / min Roller adjustment speed 2x22 mm / min Machine dimensions LxWxH 7900x1930x2500 mm Machine weight 46800 kg

Machine in good technical condition, possibility of testing after agreement. Max. length of cut sheet: 3150mm Max. thickness of cut sheet: 6.3 mm Weight: 8500kg.

-Bending machine with 3 rollers, round roller, sheet metal bending machine, used tube bending machine; -Max. sheet width 1000 mm; -Max. sheet thickness (mild steel) 2 mm; -Geared motor VEM.

weight of the machine ca.: 16 t sheet width: 3150 mm sheet thickness - max.: 16 mm sheet width - min.: 1,6 mm voltage: 400 V range - high tensile: 3950x2475x2520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after agreement the possibility to test. Table clamping area: 200x630 mm Maximum grinding length: 630 mm Grinding wheel - diameter: 250 mm Grinding spindle speed: 2660 rpm. Maximum workpiece weight with chuck: 130 kg Total power input: 5.5 kW Weight: approx. 2200 kg Machine dimensions: (LxWxH): 2710x1495x1670 mm.

Hmotnost stroje: 4400 kg Celkový příkon stroje:: 10,5 kW Upínací plocha stolu: 400 x 1500 mm Max. délka broušení: 1500 mm Max. šířka broušení: 470 mm Otáčky brousícího vřetena: 1470 , 1720 ot/min Max. hmotnost obrobku: 500 kg

Inv. Num. : 5696 Type: LE 160 Producer: Východoslovenské Strojárne Košice Created: 1977 Parameters: Compressive force: 160 t Maximum stroke rate per minute: 45 1/min Stroke: 20-120 mm Plunger adjustment: 100 mm Machine weight: 8700 kg

The BRH 20.05 grinder is in good technical condition. Can be seen in operation by appointment. Machine weight: 1950 kg Clamping surface of the table: 230x630 mm Max. grinding length: 630 mm Max. grinding width: 230 mm Max. workpiece weight: 130 kg Machine dimensions lxwxh: 1288 x 2710 mm

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

The Strojane Piesok LODD 200 press brake was produced in 1982 by the Czechoslovak company Strojarne Piesok. The machine works with a force of 200 tons of pressure and allows bending sheet metal with a length of 4000 mm. The press is equipped with a table (L x W) 4000 x 200 mm, and its power is 22 kW. The total weight of the machine is 22,660 kg. Specifications of Strojane Piesok LODD 200 press - press force: 200 t - maximum bending length: 4000 mm - table dimensions (L x W): 4000 x 200 mm - upper tool maximum stroke: 100 mm - distance between table and slider: 200 mm - distance between body walls: 3300 mm - maximum number of clutch engagements: 14/min - main motor power: 22 kW - main motor speed: 1460 rpm - air pressure: 0,4-0,6 MPa - maximum air requirement: 25 m3/h - power supply: 380 V; 50 Hz - dimensions (L x W x H): 4420 x 2060 x 3800 mm - weight of the LODD 200 pre ...

3 pieces used heavy placement arms for table scissors, etc. Length 490 mm Width 98 mm Weight / piece 16 kg

CTO 400 Piesok press brake from 1981 for sale. (pressure 400t) The piston rod is damaged and has a micro-crack. We have dies and punches in various sizes for it - prices to be agreed. The total weight of the press is approximately 39t.

The machine is in good technical condition. Max. length of cut sheet: 2000mm Max. thickness of the cut sheet: 6.3 Weight: 6725 kg Upon prior agreement, the possibility of a tour in progress.

Type: CTO 80/2500 Parameters: 80 t, 2500 mm Manufacturer: Strojárně Piesok Year of production / SO / GO: - / - / - Description: The machine is in good technical condition. Nominal forming force: 80t Working table length: 2500mm Maximum stroke: 150mm Maximum distance of the table from the ram: 360mm Working height: 800mm Dimensions LxWxH: 3700 x 1250 x 2385mm Machine weight: 6550kg Upon agreement, the possibility of a tour in progress.

Working width: 2000mm, weight: 1.65t.

Sheet thickness: 25,00 mm Bending length: 3000 mm Number of rolls: 3   Hydraulic drop end Digital read out position side rolls Pendent control position side rolls Rolling width:                 3000mm Rolling thickness 3x toproll Ø:22mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending:  16mm Top Roll Ø:                    420mm Side roll Ø:                   405mm Number of rolls:               3 Rolling speed:                 6,5 Length:                        5800mm Width:                        &nbs ...

Inv. Num. : 6768 Type: CTO 80 Producer: PIESOK Created: 1990 Parameters: Compressive force: 80 t Machine weight: 6100 kg

Offer 22569 Specifications: - Max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Motorized stroke upper beam - Max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Manual bending process is supported by eccentric weight - Connection 400 V - Space requirement approx. W 3700 x H 1250 x D 450 mm - Weight approx. 1700 kg