used SEM High speed cutters

The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer

M. No.: 167 Format (cm): 58 Equipment / Additional information: 1xreserve knife Very good condition // tested, checked and revised

Available in stock 1 x NEVER USED Capstone IGBT. Most commonly used for Microturbines C60. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Servomotor SEM MT30H4-44 new ball bearings, new coals Delivery in exchange, exchange price!

Servomotor SEM MT30U4-48 new ball bearings, new coals Delivery in exchange, exchange price!

Servomotor SEM MT30U4-57 new ball bearings

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

Container fasteners, container securing elements -Fuses: 4 -Price: per piece -Weight: 6.5 kg/piece

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)    

Overview The palletizer was manufactured and put into operation in 2002 by SEMA Maschinenbau. At a manufacturer of fresh products, the palletizer was used to palletize containers with, for example, yogurt or quark on crates. In the course of a performance increase of the plant, the palletizer will be replaced in August 2022. The palletizer includes a crate stacker, which is always used to stack two crates on top of each other before they are palletized. It also includes a layer pad inserter and a magazine for the layer pads. Tech Specs: Capacity: 4600 trays/h Special features: Layer pad inserter and vertical stacker Accesories: Formation table with vertical stacker Safety fence Magazine for layer pads Pallet transport

Overview The palletizer was manufactured by the German company sema in 2001 and until recently was part of a TetraPak filling line at a large German dairy company. The palletizer is now becoming available as the owner is investing in a completely new line. Technical data  Container type: 0.5l + 1.0l TetraPak cartons  7000 single containers per hour Single containers per pack: 10  Formation in the pack: 2x5  Output per hour: 700 packs per hour Palletizing via gantry  Top single lane pack infeed  Number of heads: 1  Type of head: transfer plate  Euro pallet (1200mm x 800mm x 144mm)  Max. Pallet height: 1700mm  15 containers per layer Layers per pallet: 10 (0,5l)/ 5 (1,0l)  Scope of delivery Protective fence, empty pallet magazine, pack and pallet transport

Dissolver mixer Manufacturer: sem Gearbox: Moteur Asynchronous Power: 0.37 kW with claw Dissolver head diameter: 100 mm LWH: 350 x 350 x 950 mm

Semi-automatic machine 220 V Electric box with disconnecting switch Reset system for screwing head Bottles from 30 to 365mm height Bottle holder tray (manual height adjustment) Current tooling : 1 screwing head covered with rubber with 3 brackets. Head foot for ? 31. Possibility to change head for other format / use or crimping, capping, ...

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: SEM Andras, brushless servo motor type HR115A6-88S -Speed: 6000 rpm -Voltage: 530V -Torque: 3.7 Nm -Shaft: Ø 19 x 40 mm -Brake: 24VDC 10Nm -Number: 2 engines available -Price per piece -Dimensions: 275/115/H145 mm -Weight: 7 kg/pc.

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepping Motor -Manufacturer: SEM, Brushless servomotor type HR142G6-88S -Speed: 6000 rpm -Voltage: 530V -Torque: 21 Nm -Shaft: Ø 24 x 50 mm -Brake: 24VDC 40Nm -Number: 2 engines available -Price per piece -Dimensions: 425/142/H174 mm -Weight: 23.8 kg/pc.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Sempress type: ADO-MAE-0-50/1000 -Flange: Ø 40 mm -Thread: M16 x 1.5 -Stroke: 980 mm -Dimensions: 1180/65/65 mm -Weight: 8.1 kg

Electric motor, three-phase motor -Power: 1.2 kW -Speed: 1400 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 335/127/H186 mm -Weight: 13.5 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 2500 rpm -Power: 4.5 Nm -Construction: B14 -Diameter shaft: Ø 16 mm -with Hohner-Encoder-267AB -Number: 2 motors available -Price: per piece -Dimensions: 400/100/H145 mm -Weight: 9.3 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 2500 rpm -Power: 4.5 Nm -with gear ratio: 1:10 -Construction: B14 angle -Diameter shaft: Ø 25 mm -with Hohner encoder 11322 -Number: 1 piece of motors available -Price: per piece -Dimensions: 480/260/H180 mm -Weight: 10.3 kg

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding set, hose set, twin hose, oxyfuel hose -Manufacturer: Semperit, twin hose set -Type: acetylene oxygen 4/4 outside Ø 11 mm -Item no.: 58487 -Length: 5m -Transport dimensions: Ø 300 x 50 mm -Weight: 1.0 kg

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding set, hose set, twin hose, oxyfuel hose -Manufacturer: Semperit, twin hose set -Type: Acetylene oxygen ISO 3821 PN2 DN9 -Length: 20 m, hose coupling only on one side -Transport dimensions: Ø 600 x 120 mm -Weight: 10 kg

Key data: 550 mm, 1500 mm

Rolling mill 60" See attachment for details!

SEM (USA) granulator, model 22, rotor 5 blades, housing 2 blades, opening: approx. 600x400 mm, complete with control cabinet 400 V. 50 Hz, mobile, motor 15 kw.

Description: Sourced from an automotive manufacturer due to production changes Serial Number: 109303 Control: Siemens Sinumerik 840 DSL ( composed of 15 NC and 4 spindles) ,  ,Machine-specific plain text messages on screen in German language This  ,machine centre is composed as follows: , 2 Centric clamping divices Actuation: , Hydraulic Swivel table: 180º Hydraulic pressure:  ,approx max 100 bar Station 1 (front) , Spindle units: 2 SEMA spindle units type SE55 - HSK 50 for deburring Spindle Bearing inside diameter: 55 mm Sealing with barrier air and labyrinth Tool holder: HSK50 Drive power: 1,5kw at 3000 u/min Tool cooling Dry machining Drive direct via coupling Manual tool change 2 pcs. 4 spindle head for thread forming 4xm10 with IK and ABS tool holder Drive power AC servo motor, 11.0 kW Spindle speed  ,variable: ,max 3 ...

max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc.