used ROEHM Wedge Bar Chucks

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

8 piece elements with ROeHMHELD swivel clamps, for conversions etc. further: 4 piece detto

New planboard Roehm 600 mm Direct recording Camlock - 8

diameter: 400 mm = pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm hollow: 75 mm weight: kg Röhm four-jaw chuck Diameter 250 mm Through hole 75 mm Mounting cone approx. 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm hollow: 75 mm weight: 30 kg Ø: 250mm Passage: 75mm Weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 135 mm : 40 mm clamping width: 225 mm weight: 45 kg clamping capacity: 4,8 t dimensions of the machine ca.: 550 x 300 x 140 mm - with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm hollow: 75 mm weight: 40 kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø75mm - Weight: 40kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 315 mm hollow: 100 mm weight: / kg Ø 315 mm Ø passage 100 mm Height without jaws 85 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm hollow: 105 mm weight: / kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø105mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: . kg taper MK: .. Different jaw sizes and makes. Price information is not possible without a visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 85 mm tool adaptor: SK 50 bore of diameter max.: 130 mm adjustment of the slide: 40 mm tool tapers in the slides: 20 mm weight: ca. 3 kg Wooden box with accessories: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 195 mm -interchangeable jaws -Weight: 12 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 200 mm -interchangeable jaws -Cone: 69 mm -Thread: M 95 x 4.5 mm -Weight: 26 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Hole circle: 172 mm -Weight: 90 kg

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as seen -Wedge bar chuck: Spare parts carrier, see photos for missing parts -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Intake: short cone 11 -Weight: 64 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Transfer: in the current condition as seen -Base plate: slight damage to the outer edge, see photo -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Hole circle: Ø 235 mm -Cone: Ø 195/150 mm -Through hole: 60 mm -Dimensions total: Ø 400 x 265 mm -Weight: 67 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 330 mm -Interchangeable jaws: 1 set -Bayonet short cone flange: cone size 8, cone Ø 139.7 mm, bolt circle Ø 171.4 mm -Throughout: Ø 90 mm -Weight: 76 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Number: 3x feed available -Price: per piece -Weight: 60 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 216 mm -Recess recording: mm -Pitch circle: mm -Through hole: 50 mm -Soft interchangeable jaws -Dimensions: Ø 216/H75 mm -Weight: 18.7 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: -Weight: 25 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 290 mm -recess recess: Ø 268 mm -Hole circle: Ø 168 mm -Through hole: Ø 70 mm -Weight: 43.5 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 195 mm -Taper cone: Ø 48 mm -Mounting hole circle: Ø 105 mm -interchangeable jaws -Weight: 18 kg