We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Copy milling machine Make: Reichenbacher Model: R 818 8 milling stations Manual scanning of the sample workpiece
used
ully automatic wood copy milling machine make REICHENBACHER type KS225Make -No: 1182, year of construction 10/1994 with Siemens OP 393 III controlSimultaneously mills and grinds two small parts with complicated shapes, such as tobacco pipes, golf club heads, sports pistol grips, wooden shift levers, etc.Technical specifications:machine constructionStable frame construction in a closed, against dust andNoise-encapsulated housing. Upper area of the front with gas pressure springHinged door, with security window.machine equipmentTo craft 2 copies of a model at once, you have:2 milling spindles each with a milling head dia. 240 mm (equipped with HS steels), via flat belts jointly driven by motor 2.2 kW; number of milling spindles 7200 rpm; Direction of rotation right.2 grinding units each with a 120 mm wide endless grinding belt, together with a 0.75 kW motor driven; belt speed 13 m/s; wi ...
used
Reichenbacher clarifiers. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).
used
Drilling machine Reichenbacher Drilling machine with 3 drilling units from above Transmission width maximum 1400 mm 3 motors adjustable to the full width Motor strength 1.5 kW each Motors can be switched individually Lifting / lowering of the drill bar pneumatically foot-operated Maximum pass-through height 400 mm 2 pneumatic workpiece holders adjustable on machine table Drill distance minimum 180 mm Drill distance maximum 1200 mm dimensions 2600 mm x 2100 mm x H 1700 mm
used
Table dimensions: 10,140x2240mm, milling/ drilling aggregate rotational speed: 5000-30.000/ 2100-8000/min, controls: SIEMENS SINUMERIK 840D, operational hours counter: 48,740h.
used
Operational hours counter: ca. 40,000h, there is little documentation, has been serviced regularly, suitable for aluminum and wood, available from June/July 2024, an on-site inspection is possible.
used
CNC machining center for wood/plastic and composite materialMake REICHENBACHER type Vision - 1, year of construction 1999Technical specifications:Travel X:3740 mmTravel Y:1680 mmTravel Z:340 mmC axis = rotation: +/- 360°Feeds axis speed: 60 m/min.Feed web speed: 85 m/min.Z axis: 20 m/min.C axis:90°/sMilling unit speeds: 1500 - 18000 rpm.Tool holder: SK 40Distance table and spindle min./max.: 80 / 420 mmEnd mill diameter: 24 mmProfile milling cutter diameter: 100 mmTool changer slots:12Tool length max.: 200 mmTool diameter max.: 200 mmTool mass per piece / total: 6 - 50 kgTable size: 3800 x 1500 mmDrive power: 25 kWWeight approx.: 6.5 tWith- Drilling unit spindle speed 4500 rpm., 2.2 kW- Vacuum / grid table- CNC control Siemens 810 D with central unit CCU2 and software module MMC 103- Compressed air requirement 300 - 500 L/min.- Filter systemused, in good conditionPrice on request.Deli ...
used
Sculptor copy milling machine Brand Reichenbacher Type R632 / 40 Machine number: 2068 2 80 Milling of wooden figures e.B. nativity figures etc. with copy pen. Also to be used as a copy car carving machine. Machine is to be operated manually. 6 workpieces can be machined simultaneously. Clamping length maximum 1050 mm Workpiece diameter maximum 300 mm If each spindle is used, maximum workpiece diameter 150 mm Milling motor motor power 0.5 kW each Dimensions 3700 mm x 2200 mm x H approx. 1500 mm The machine is in stock with us, but still needs to be assembled and tested.
used
Flat table CNC machining center Reichenbacher RANC PW with tool changer. · Tool magazine for 16 tools · Including post editing tools · Further technical data: See PDF · Special price for do-it-yourself ex-site ., Axles: 3, X- stroke: 2,860 mm, Y-stroke: 1,600 mm, Spindle: 9 kW, Operating hours: 2,900, Further technical data: See PDF
used
Manufacturer: Reichenbacher, Year: 2011, Control: Siemens Sinumerik 840 D Solution Line mit NCU 720.2, Software: Frame-Concept, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Min.-max. workpiece height in mm: 10-120, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Number of milling spindles: 2 X 5 Achs, Tool adaption system: HSK 63, Milling engine 1 hours power: 18, rpm 1): 1000-24000, Kettenwechsler: yes, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 250, Portal machine: yes, Automatic setting up table: yes, Charging system double-sided: Roboter, Destacking unit: mit Lagerplätzen, Automatic charging: Roboter auf Fahrportal, Presentation possible: yes, FREE TEXT: Bohr undBänder Eindrehstation, Year ...
used
Manufacturer: Reichenbacher, Type: 950 MC, Year: 1996, Steuerung : Siemens TD 390, Working range X: 5200, Working range Y-axis: 1300, Working range Z: 250, C-Achse: yes, Number of milling spindles: 1, Tool adaption system: HSK, Milling engine 1 hours power: ca.10, r.p.m: 2000-24000, r.p.m: 2000-24000, Number of tool magazines: 1, Number of tools per tool-magazine: 12, Traverse table: yes, Vacuum pumps m³/h: 250, Portal machine: yes, Einsatzbereich Arbeitsplattenfertigung, Year :1996
used
Manufacturer: Reichenbacher, Type: Vision 2 Sprint, Year: 1999, Control: Simumerik 840 D, Working range X: 6140, Working range Y-axis: 1600, Working range Z: 480, Feeding speed max m/min: 60, Pendulum processing: yes, Number of milling spindles: 4, Milling engine 1 hours power: 4,8, 2 station allocation: yes, 4 station allocation: yes, Vacuum pumps m³/h: 160, Year :1999
used
Description: Machine no. 4014 SIN840D control x- travel , 10000 mm y- travel , 1000 mm z- travel , 500 mm Profile length 7,200 mm Profile width 300 mm Profile height 300 mm Workpiece dimensions max. 8,000 x 1,000 x 300 rpm Spindle speeds - continuously variable 1 - 24,000 rpm Drive power 15.00 kW Feed X / Y axis 1 - 60,000 mm / min. Feed Z-axis 1 - 20,000 mm / min. B - axis +/- 180 ° C - axis 360 ° Tool holder HSK-A50 Tool magazine: 24 Tool length - max. 240 mm Tool diameter 95 mm Tool diameter with 2 free spaces 200 mm Saw blade diameter max. 350 mm Working area 7,200 x 300 mm Description: 5-axis high-speed machining centre with SIEMENS SINUMERIK840D control system, RECKERTH high-frequency spindle, 8 carrier units, each with a pneumatically actuated clamping device, arranged in the Y-direction and in the X-direction X-direction via a programme-controlled positioning a ...
used
Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)
used
20 copy cells You can purchase the cutter together with the forming press. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. We also have a lot of machines in stock.
used
OMEC 750 milling machine for drawer joints The operator enters two parts at once, then the machine Automatic milling of the entire length You can call or write to us. We can speak and write German and Russian. You can also send messages in English.
used
With feed and vacuum pump
used
--------------------
used
I sell a router for Koperfräsen Sicar, built in 1998. Milling head with motor Swivel + - 45° Spindle holder fi.10mm Electric motor: 1.9kW / 2800 rpm -> 18,000 rpm at the spindle 1.5 KW / 1400 rpm -> 9,000 rpm on the spindle Pneumatic connection the milling cycle, pedal operated. Made in Italy.
used
Router with table widening Speed: 10,000 – 20,000 rpm. Table dimensions: 900 mm x 765 mm4. Engine 3 kW5. 380 V Dimensions: 900 mm x 1400 mm x 1600 mm Weight approx. 575 kg
used
SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)
used
Router model OF 950 year 90
used
Used milling machine Manufacturer: Zimmermann Type FZ 1 Built in 1987 With brake Total weight approx. 500 kg Speeds 560/1,000/1,800/2,200/3,600/4,400/7,400/14,000rpm. Clockwise/counterclockwise rotation Table size 630x490mm Support table 490x400mm Longitudinal movement 420mm Transverse movement 420mm Head can be swivelled on both sides With rotary table With abb. Accessories (cutters, clamps) Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. ...
used
Used milling machine Manufacturer: Zimmermann Type FZ0 (Fritzi) Built in 1986 with base cabinet with various milling cutters Total weight approx. 200 kg Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we h ...
used
Used milling machine Int. Art. Ref. m3458 Manufacturer: SAMCO Type ROUTER Projection 500 mm Speeds 10,000-20,000 rpm. Power 1.5/2.2 kW Vertical run of the spindle 80 mm Height increase of the table 150 mm Weight approx. 210 kg Pneumatic lines are new Electrics checked, connection cable new Location: 59425 Unna The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The go ...