used RSA Automatic Polishing Machines

Brush Deburring Machine Fabr. RSA Type STL IIIMachine -No: BIII 3-7262, built in 1986for pipes, profiles, solid material and sheetsWorkpiece diameter: UnlimitedBrush diameter: 250 mmBrush width: 60 mmOperating and protection: S 6-60% IP 44elec. Connection: 380VConnected load: 2/3 kWSpeeds by pole-changing motor Engine: 1500/3000 rpm.External dimensions: 650 x 450 x 1150 mmWeight approx: 75 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type ST-No: RG II 48-1902, year of construction 1991for pipes, profiles, solid material and sheetsTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds thanks to pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgColor greenWith- base- brushused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine, make RSA, type Rasamax MonoMasch. -No: R-M-38/3305 built in 2000Technical specifications:Material thickness from: 1 - 6 mmSheet thickness: up to 6 mmSheet width: 100 to 1,000 mmSheet length: 100 to 1,000 mmSheet shape: sheets with notches, straight cut sheetsMaterials: steel, stainless steel, NEMax. Brush diameter: 250 mmBrush speed: 1500/3000 rpm.Drive power: 1.0 / 1.4 kWPower connection: 380 V, 50 HzDimensions with base: 400 x 500 x 1300 mmWeight approx: 50 kgWith- Base cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring machine make RSA type Turnamat 2Machine -No: 48-1047 / 96 built in 1996Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation, i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring machine make RSA type Turnamat 2Machine -No: 048-028908 built in 2008Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWDimensions approx .: 1200 x 1200 x 1800 mmWeight about: 550 kgsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation,i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type STLMachine -No: RG III 071628 built in 1990for pipes, profiles, solid material and sheet metalTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds through pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgwith- several new replacement wire brushesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine number: ST-R-1660 Buerstentgratmaschine for the deburring of metal sheets or plates Power supply: 380 V 50 Hz 1.0/1.4 kW 2 speeds: 1500-3000 rpm. Brush diameter: 250 mm

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

Specifications: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 2.2 / 3.0 kW - Brush depth adjustment - Height adjustable support table with V recesses - Working height 900 mm - Space requirement approx. W 750 x H 1150 x D 5ß0 mm - Weight approx. 200 kg - separate dust extraction - Drive 400 V - Space requirement approx. W 650 x H 1100 x D 650 mm - Weight approx. 50 kg

Diameter: 250mm, wire thicknesses: 0.20mm/0.27mm/0.35mm/0.38mm/0.50, grit size (RASALON): 80/120/180/320/500. Brush roller: Brush speed: 1500/3000rpm. Dimensions X/Y/Z: 700mm/440mm/1200mm. Including workpiece support and prism guide. Documentation available.

plate thickness: 5,0 mm turning speed range: 1500 / 3000 U/min diameter of brush: 250 mm width of brush: 80 mm voltage: 380 Volt total power requirement: 2,4 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 700 x 460 x 1200 mm Description : RASAMAX DUO was specially developed for the fast and reliable developed for deburring straight sheet metal. The deburring machine has two counter-rotating deburring brushes that two offset levels. With this principle, upper and Lower edge of sheet metal deburred simultaneously in one operation. This means up to 50% time savings compared to other methods! RASAMAX DUO is suitable for deburring individual pieces and small series and designed with its robust construction for continuous use. Furnishing: - efficient deburring of straight sheets - for steel, stainless steel, non-ferrous metals The data for this ad was created with  ...

diameter of brush: 250 mm width of brush: 80 mm turning speed range: 1500 / 3000 U/min voltage: 380 Volt total power requirement: 2,0 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 800 x 400 x 1.300 mm Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9238987 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7103 Type: TURNAMAT Producer: RSA Created: 2014 Parameters: Max. speed: 1500/3000 1/min Power consumption: 4.9 kW Max. thread diameter: 250 mm

Brush deburring machine RSA type RASA Mono Masch. No. R.III-09/2669 Year of construction 2008 Brush diameter max. 250 mm Brush width 60 mm Brush holder 53 mm Brush speed 1500 / 3000 rpm. Motor power 2.6 / 3.1 kW Mains connection 400 volts, 50 Hz - Base with 4 oscillating elements Space requirement L x W x H 720 x 480 x 1180 mm Weight 172 kg very good condition; used

Machine in good technical condition, minimally used. Robust and fast deburring for symmetrical and asymmetrical workpieces. De-needling time 1 to 5 seconds (on the front surface). Speeds rpm 1,500 + 3,000 Cross-sections mm 20 x 20 to 120 x 120, 10 x 10 to 120 x 120 Materials: steel, stainless steel, aluminum, non-ferrous metals Power: 4.9 kW Max. thread diameter: 250 mm.

Year: 1999 type: STL weight: 130 kg Deburring machine Make: RSA Type: STL year: 1999 weight: 130 kg ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brush spindle RPM:1500 / 3000 1/min Brush diameter:250 mm max. workpiece diameter:90 mm Dimensions (L/W/H):720 x 1150 x 450 mm connected load:3,1 kVA connected load frequency:400 V

Dimensions 1.1m wide* 0.9m low * 1.75m high A lot of accessories with you

Polishing machine steel - Continuous speed - Height: 130cm - Depth: 110cm - Width: 100cm - Weight: 500kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.

Continuous rotary table HAU R60-1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800 mm, 3 polishing units with 7.5 kW each, polishing shafts 50 mm diameter, max. polishing wheel width 2 x 400 mm + 1 x 280 mm, max. polishing wheel diameter 420 mm, motorized longitudinal and height adjustment – machine equipped with complete. Application system for liquid polishing paste More pictures on request

Rotary indexing table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure tank), incl. control cabinet Price and further details on request.

There are three identical machines available, connected load: 8.5kW.

2-station polishing station make LÖSER type FS 384 G2Machine -No: 268 built in 1989Technical specifications:Number of polishing stations:2Polishing disc diameter approx. :240 mmTable length: 2750 mmTable width: 150 mmPassage height: 150 mmPassage height: 100 mmAbrasive belt width: 2500 x 150 mmConveyor belt feed: 2.5 + 5.0 m/min.Conveyor belt: 3000 x 150 mmConnected load: 380 V, 50 Hz:Drive power: 5.5 kWWith- Polishing stations with liquid paste gunsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC gest. Portal grinding and polishing machine make HAU-SIMEX-RAPACK type FlexomatMachine -No: 88/08/30/2271 built in 1988Technical specifications:AXIS 1Longitudinal axis, horizontal X: 1100 mmTravel speed: 250 mm / secAXIS 2Transverse axis, horizontal Y: 510 mmTravel speed: 250 mm / selAXIS 3Vertical axis Z: 475 mmTravel speed: 190 mm / secAXIS 4Rotation axis, travel range: 210 °around the Z axis =: UTravel speed: 5.4 rpmAXIS 5Rotation axis, travel range: 360 °around the Y axis =: VTravel speed: 22 rpmAXIS 6Rotation axis, travel range: 360 °around the X axis =: WTravel speed: 22 rpmClamping force of the basic clamping device: 700 NExpansion shaft for workpiece: 50 mmNumber of milling units: 2Type of belt grinder: MSF 355Sanding belt size: 3500 x 100 mmContact disc size: 250-500 x 100 x 35 mmDrive power: 4.0 kWSpindle speed: 900-4350 rpm.Working height: 1000 mmExternal dimensions d.  ...