used ROJEK Belt grinders

Belt grinding machine for wood & metal, roller spacing approx. 3000 mm

SPECIFICATIONS: Horizontal belt grinding machine Table width mm: 800 Table length mm: 2,900 Sanding belt width mm: 1,500 Sanding belt length mm: 8,000 Maximum working height mm: 600 Power of the main engine HP: 4 With sanding shoe

For sale second hand sanding maschine steinemann. Up and down paper, super wide, 200kw. 1990 yc. Short used.

Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4

SPECIFICATIONS: Working area: 2400 x 800 mm Height adjustment: 550 mm Installed power: 3 Kw Vertical travel speed Max. belt length: 6650 mm Pulleys: Ø 200 mm

SPECIFICATIONS: Installed power: 5.5 kW 2 flywheels Ø 450 mm Sanding belt length: 4900 mm 2 speed settings

Bench belt sander Höfer Motor 4.2KW format 2.50 x 1.20 meters

Code: 0198 Brand: MABO - ITALY Model: DELTA - CE Standard Belt sanding machine with double goose neck for wood, metal, aluminium, composite materials - CE Standard Table length mm 3000 Table width mm 800 Automatic table lifting - Vertical stroke mm 550 Motor 2 speeds rpm 1400/2800 - Hp 3/4 Pulley diameter mm 200 Suction motor Hp 0,5 Emergency rope Suction mouth diameter mm 120 Overall dimensions mm 4400 x 1100 x 1550 h Weight kg 420

Stone Disc Grinder is especially preferred by high-capacity coffee makers, spice makers and it is used for grinding Turkish coffee and also Black Pepper, Allspice, Cumin, Salt and Feed Grain. Capacity 75 kg/h.

Cylindrical mill. Two pairs of rolls, chilled water. Up to 1000 kg/h. After renovation.

Snail for grinders 160 mm K + G - KRÄMER+GREBE Snail length 640 mm Sneil length without pin 530 mm Pin 110 mm (32 x 23 mm) Front roller, diameter 75 mm Square in the auger 80 x 80 mm Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ‚a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

A meat grinder Düker REX AWN-130 L

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 300 mm Execution: hydraulic Max. distance from table to spindle-centreline: 500 mm Longitudinal travel (X-axis): 780 mm Transversal travel (y axis): 350 mm Automatic cross-feed: stepless up to: 7.00 m/min Table speeds: stepless from: 1.00 m/min up to: 30.0 m/min Automatic vertical feed: from: 0.0010 mm up to: 0.010 mm Vertical rapid traverse: 0.20 m/min Diameter of grinding wheel: 300 mm Width of the grinding wheel: 50 mm Grinding wheel speeds: number (steps): 2 from: 1775 rpm up to: 2180 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 8.15 HP Machine´s weight about: 3100 kg Overall dimensions machine: Length: 2100 mm Width: 1300 mm Height: 2450 mm Various accessories: Coolant system Wheel truieng attachment hydraulic ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 1 column execution Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 200 mm Travel of the vertical slide: 250 mm Passage from grinding motor to table: 270 mm Max. grinding diameter: 15 mm Vertical travel of grinding spindle: stepless from: 2 mm up to: 32 mm Travel speeds: steps: 2 from: 4.0 m/min up to: 5.0 m/min Possible grinding-spindle speeds: stepless up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1600 mm Various accessories: Rotary table diameter: 300 mm Set of clamping tools Air turbine

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 150 mm Grinding length: 400 mm Grinding width: 150 mm Execution: hydraulic Max. distance from table to spindle-centreline: 350 mm Table speeds: stepless from: 2.00 m/min up to: 20.0 m/min Automatic vertical feed: from: 0.0020 mm up to: 0.013 mm Diameter of grinding wheel: 200 mm Width of the grinding wheel: 16 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2.30 HP Machine´s weight about: 900 kg Overall dimensions machine: Length: 1300 mm Width: 1200 mm Height: 1500 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 750 mm Table width: 200 mm Grinding length: 500 mm Grinding width: 250 mm Grinding height: 375 mm Max. distance from table to spindle-centreline: 525 mm Table speeds: stepless up to: 30.0 m/min Diameter of grinding wheel: 300 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: number (steps): 2 from: 1400 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.50 HP Machine´s weight about: 2250 kg Various accessories: Coolant system Magnetic plate: Length: 500 mm Width: 250 mm Wheel trueing attachment Creep feed

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data 1 column execution Table length: 400 mm Table width: 300 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 200 mm Travel of the vertical slide: 250 mm Passage from grinding motor to table: 270 mm Max. grinding diameter: 15 mm Vertical travel of grinding spindle: stepless from: 2 mm up to: 32 mm Travel speeds: steps: 2 from: 4.0 m/min up to: 5.0 m/min Possible grinding-spindle speeds: stepless up to: 120000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 750 kg Overall dimensions machine: Length: 1100 mm Width: 1000 mm Height: 1800 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 220 mm Grinding length: 550 mm Grinding width: 225 mm Grinding height: 200 mm Execution: hydraulic with automatic cycle Max. distance from table to spindle-centreline: 325 mm Longitudinal travel (X-axis): 500 mm cross travel (Z-axis): 250 mm Vertical travel (Y-axis): 300 mm Automatic cross-feed: from: 0 m/min up to: 2.5 m/min Table speeds: from: 0 m/min up to: 25 m/min Automatic vertical feed: from: 0.005 mm up to: 0.05 mm Vertical rapid traverse: 0.23 m/min Diameter of grinding wheel: 250 mm Width of the grinding wheel: 25 mm Wheel int. diameter: 76.2 mm Grinding wheel speeds: up to: 2100 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3 kW Machine´s weight about: 1400 kg Overall dimensions machine: Length: 1850 mm ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 5.0 mm Max. internal grinding diameter: 200 mm Grinding depth: 250 mm Centre height: 180 mm Distance between centres: 1000 mm Workpiece spindle speeds: number (steps): 6 from: 125 rpm up to: 1000 rpm Spindle hole: 50 mm Grinding spindle speeds: from: 0 rpm up to: 12000 rpm Grinding table travel: min.: 3 mm max: 600 mm Table speeds: stepless from: 0.40 m/min up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 1.00 kW Drive for internal grinding spindle: 3.7 kW Total power required: 8.7 kW Machine´s weight about: 2700 kg Overall dimensions machine: Length: 1800 mm Width: 900 mm Height: 1500 mm Various accessories: 3-jaw chuck diameter: 200 mm Steady

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 0.5 mm Max. grinding diameter: 30 mm Max. workpiece length for infeed grinding: 0.5 - 40 mm Grinding wheel: diameter new wheel: 400 mm Width: 125 mm Bore: 203.2 mm Speeds: number (steps): 2 from: 850 rpm up to: 1700 rpm Peripheral speed: 16 / 32 m/s Regulating spindle: diameter new wheel: 225 mm Width: 125 mm Bore: 80 mm Speeds: stepless from: 0 rpm up to: 120 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2500 mm Width: 2000 mm Height: 1800 mm

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 5 mm Max. internal grinding diameter: 250 mm Grinding depth: 200 mm Workpiece spindle speeds: stepless from: 15 rpm up to: 1500 rpm Max. angle: +/-15 ° Spindle hole: 50 mm Max. distance from workpiece spindle to grinding spindle holder: 770 mm Table speeds: stepless from: 0 m/min up to: 10 m/min Workpiece spindle motor: 0.5 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2250 kg Various accessories: Wheel trueing attachment 3-jaw chuck diameter: 200 mm 3-jaw chuck diameter: 250 mm 4-jaw chuck diameter: 250 mm Set of jaws hard Set of jaws Macnetic chuck diameter: 200 mm Steady Set of collets Set of grinding arbors

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 25 mm Grinding depth: 100 mm Centre height: 125 mm Distance between centres: 160 mm Workpiece spindle speeds: number (steps): 3 from: 350 rpm up to: 750 rpm Spindle hole: 20 mm Grinding table travel: min.: 1 mm max: 100 mm spindle holder: B - 8 mm Table speeds: stepless up to: 5.00 m/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 350 kg Overall dimensions machine: Length: 910 mm Width: 500 mm Height: 1600 mm Various accessories: Air spindle

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 3.0 mm Max. internal grinding diameter: 50 mm Grinding depth: 80 mm Centre height: 200 mm Workpiece spindle speeds: number (steps): 5 from: 350 rpm up to: 1200 rpm Max. angle: 120 ° Spindle hole: 25 mm Possible grinding-spindle speeds: from: 9000 rpm up to: 120000 rpm Grinding table travel: min.: 2 mm max: 300 mm Table speeds: stepless from: 0.10 m/min up to: 10.00 m/min Voltage 50 Hz 3x: 380 Volt Drive for internal grinding spindle: 15.0 kW Machine´s weight about: 2200 kg Overall dimensions machine: Length: 1800 mm Width: 1500 mm Height: 1600 mm Various accessories: Face grinding attachment Internal grinding spindle:: AIR number: 1 max. speed: 80000 rpm

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 400 mm Max. Longitudinal travel: 320 mm Grinding wheel: Grinding weehl left side: Diameter: 400 mm Width: 25 mm Bore: 127 mm Max. grinding diameter: 198 mm Workpiece weight on centres max.: 60 kg Grinding wheel speeds: number (steps): 3 Peripheral speed: 32 m/s Work piece spindle head: Spindle taper:: 4 MT Taper in tailstock:: 3 MT Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor: 3 kW Machine´s weight about: 1500 kg Various accessories: Internal grinding attachment swivellable: Spindle speeds: 22000 rpm Swivellable redressing device Rayon redressing device Sparking-out attachment Set of collets

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 175 mm Distance between centres: 1000 mm Grinding wheel: Diameter: 400 mm Width: 50 mm Bore: 127.0 mm grinding wheel width: 80 mm Grinding wheel speeds: number (steps): 4 from: 1450 rpm up to: 2300 rpm Angular displacement: 90 ° Work piece spindle head: speeds: stepless from: 30 rpm up to: 600 rpm rotatable: 90 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 10 ° Table speed: stepless from: 0.10 m/min up to: 6.0 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 4.0 HP Machine´s weight about: 2200 kg Overall dimensions machine: Length: 2500 mm Width: 1300 mm Height: 1400 mm Various accessories: Tailstock with fine adjustement Internal grinding attachment Measuring instrument: MARPOSS Coolant system Set of grinding ...