used RAS Bending Tools

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Mandrel tube bending machine make RASI type UNI 3Machine -No: 1740, built in 1989Technical specifications:Bending capacityMandrel bending 180 °: 60 x 3 mmR =: 1.5 x DMandrel length: 6000 mmDrive power: 3 kWExternal dimensions of the machine L x W x H: 1100 x 1100 x 1250 mmMachine weight: 700 kgWeight mandrel: 350 kgWith- Mandrel bending device 6 m mandrel length L x W x H 6500 x 450 x 1200 mm- hydraulic mandrel retraction- 3-way foot switch- mobile on castors- 1 set of bending tools built upused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

This RAS 62.30 TURBObend Plus bending machine was made in the year 2004. It is equipped with a Ras CNC 6000 control unit. The machine has a sheet length of 2540 mm and a max. sheet thickness of 2 mm.

Electro-hydraulic mandrel bending machine make RASI type AUT 60Fabr. -No: 1332, built in 1981Max. Working area: 60 mmBending radius 1.5 x D min: 28 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0xa0 max: 300 mmMax. Bending angle: 180 °Working height: 850 mmOil filling: 100 lMandrel length: 2000 mmDrive power: 3 kWWeight: 1050 kgWith- 2 speeds- Preselection for 5 bending angles- a lot of toolsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Thenbsp;Ras ductseamer 22.82 produces longitudinal seams along the edges of square or rectangular cross-section ducts. This duct seaming machine has 15 roller shafts which are equipped with seaming rollers, and nine further intermediate rollers are located in an overhead seaming bar. The RAS 22.82 is a very simple and reliable machine that can be easily operated by one person. max thickness: 1,25 mm

Swivel bending machine, edge bench, gutters, roof gutters, beading machine, beading machine -Max. Working width: 1280 mm -Max. Sheet thickness: 1.75 mm -Opening width: 180 mm -Clamping via: threaded spindle -Bending angle adjustable via: stop -Dimensions: 1850/600/H1240 mm -Weight: 380 kg

Hydraulic cnc mandrel bender for pipes and profiles The rasi numerical bender for pipes and profiles ensures bending without deformation, distortion or change in diameter. The bent pipes retain their shape and the fitted mandrel prevents the formation of folds and deformations. Possibility of 3D mandrel bending from pipes with a diameter of 10 to 60 mm and profiles from 10x10 mm to 40x40 mm. Bending tools included: cylindrical: -profile 20x10 -profile 40x20 - pipe fi 10 - pipe fi 20 - pipe fi 30 - pipe fi 40 pin: -profile 20x10 -profile 40x20 - pipe fi 10 - pipe fi 20 - pipe fi 25 - pipe fi 30 - pipe fi 40 - pipe fi 17.2 - pipe fi 21.3 - pipe fi 26.9

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Inv. Num. : 3168 Type: SE 80.3 Producer: RASI Created: 2003 Parameters: Minimum tube diameter: 4 mm Maximum tube diameter: 82 x 2.6 mm Minimum bending radius: 34 mm Maximum bending radius: 228 mm Maximum bending angle: 195 h Total power requirement: 11 kW Maximum bending length: 3-6 m Maximum resistance torque: 12.7 cm³ Operating voltage: 400 V Control voltage: 24 V Feed speed: 0-60 m/min Machine height: 1200 mm Machine length: 7000 mm Machine width: 1300 mm Equipment: Bending tools

This RAS FLEXIbend 73.40 Bending machine was manufactured in the year 2005 in Germany. It is equipped with a SYSTEM 6000 TOUCH control unit. The machine has a bending length of 4060 mm.

Description: - Machine number: 188/9 - Useful length: 1020 mm - Sheet thickness: max. 1.25 mm weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,570 x 450 x 920 mm

Description: - Machine number: 188/9 - Useful length: 1020 mm - Sheet thickness: max. 1.25 mm weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,570 x 450 x 920 mm

Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold

Electric tool changer RASTER Premat EWD20

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rasch Type: RR foiling machines for chocolate eggs with infeed System Year of manufacturing: 1987 pieces: 2 pieces output capacity: up to 150 pieces/min. Format on machine: Double twist Ei/Egg 43x27mm / Kugel/Bowl 30 mm. We offer this machine in 'as is' condition, without warranty excluded Vat, ex Work Germany, unpacked

Sell a table scissors, which was used exclusively for plastic cutting. Manufacturer RAS Type: 50.20 Space requirement 2.5m*1.1m*1.6m High Cutting length 1020mm Nmyhr Cutting thickness 1.25mm Weight 220kg

Max bending length: 3200 mm Max sheet thickness: 4 mm steel Weight: approx. 5800 kg Mwauag Motor-controlled rear stop with folding cams up to 1500 mm Motorized bending cheek adjustment Multibend 9000 Control Segmented upper cheek tool with automatic tool clamping (height 150 mm)

Channel folding machine make RAS type 22.81Mach. -No: 297/5, year of construction 11/1987for producing longitudinal folds on the edges of rectangular and square air ductsTechnical specifications:Sheet thickness max .: 1.0 mmsmallest duct cross-sectionfor sheet metal thicknesses of 0.5 mm to 0.63 mm: 80 x 80 mmfor sheet metal thicknesses of 0.5 mm to 1.0 mm: 100 x 100 mmwith guide carriage: 160 x 160 mmPassage speed about 15 m / minDrive power: 2.2 kWDimensions approx: 6385 x 495 x 1100 mmWeight approx: 650 kgWith- Guardrailsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal - folder former make RAS type 22.15Built in 1970Profile height max.:20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max .: 1.5 mmProfiling speed approx. 14 m / minPower requirement: 3 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx. 300 kgWith- Profile rolls for Pittsburg fold and standing seamused, from an operating resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Folding former make RAS type 22.15Masch. -No: 35/3 built in 1971Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 1.25 mmWorking speed approx: 14 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Rollers for Pitsburghfold 1mm- Sliding fold 0,5 - 1,5 mm width 29 mm- 7 pairs of rollsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.15Fabr. -No: 155/6 year 1982Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 0.5 - 1.25 mmSheet length: 300 mm - optionalWorking speed approx: 14 - 17 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Snap- Cam standing seamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

pressure: 40 t stroke: . mm no. of strokes: . Hub/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ras 3200 x 4 mm CNC Max worklength: 3200 mm Max tickness: 4 mm Distance between clampblock -- ram: 400 mm Max displacement back gauge: 1550 mm Eletric motor (power): 7,5 kW

Ras 3200 x 4 mm CNC Max worklength: 3200 mm Max tickness: 4 mm Distance between clampblock -- ram: 400 mm Max displacement back gauge: 1550 mm Eletric motor (power): 7,5 kW