used POSALUX Circle Transfer Machines

Including cyclone filter

Including cyclone filter

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With s ...

: 0 : 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m PC board drilling m/c, single spindle, projektor. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m : : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp. The data for this ad was  ...

Capacity (x): 0 Process Application: 0   Other Info: 0

Capacity (x): 0 Process Application: 0   Other Info: 0

Capacity (x): 0 Process Application: 0   Other Info: 0

To sieve dry material: like flour-, grainy-, and granule-shaped material. Free running sieve case hanging in a massive framework With an automatic sieve ball cleaning. Sieve-layers in a simple way interchangeably. Applicable to sieve all floury-, grainy materials in dry condition. Sizes of Wide 500 – 1500mm / Lengths 1200 – 2400mm Sieve layers 2 to 4 layers, grain

Spare blade for Längsschneiddysteme (slitting lines) 10 piece circular knives (upper blade) 100 x 70 x 1, 2 (or similar size) with 10 bit holder shaft. NEW. 10 piece counter knife (bottom) 78 x 55 x 10 (od similar dimensions). NEW. For slides or paper industries. Alternative dimensions on request.

ATECH ALU-KALTKREISSAEGE TYPE CRATER A-450 - Half-automaat - Zaagblad 450 mm - Dubbel vertek - 4 pneumatic clamps - Nevelsmeerssysteem - Roller baan 300 cm met lengteaanslag - Blaaspistool - Automatic beshermkap - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

ATECH ALU-KALTKREISSAEGE TYPE CRATER A-450 - Half-automaat - Zaagblad 450 mm - Dubbel vertek - 2 pneumatic clamps - Nevelsmeerssysteem - Roller baan 300 cm met lengteaanslag - Blaaspistool - Automatic beshermkap - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Circle rotary pump Capacity: 2,0 m3/h Capacity: 2,0 m3/h Pressure 0,8 bar Motor: 1,1 kW - With connections: inlet: DN 40 outlet DN 40 - With chassis mobile with 2 steering and 2 fixed wheels - With cable and CE plug 16A Measurements and Weight: Length: 1100 mm Width: 620 mm Height: 1100 mm Comment: the pump is tested, 100% functions guarantee! On request with an additional variable rate variable speed drive. Connections can be changed at extra cost.

The machine is suitable for small and medium series. Function can be checked.

1 used circular and ring cutting machine, Manufacturer: Peters Year of manufacture :1973 Drive power: approx. 0.55 KW Cutting diameter: max.1000 mm The machine is suitable for cutting cardboard, leather and rubber and is fully functional.

FHS roller conveyor transfer pusher transfer pusher ejector 90° 4300-510-450RA1960 Make: FHSRunning direction: both directionsRoller width (RB): 450 mmNominal/outer width (NB): 510 mm / 650 mm with chain guidelength: 4300 mm2x oversliderwidth of slider: 1500 mmdiameter rollers: 50 mmroller distance: 75/100/125 mmMotor overslider and roller conveyor: SEW motor 300-500VFrame height: 140 mm/250 with chain guideConveyor speed: freely adjustable with frequency converterScope of delivery: without supports, without side guide 1x Movi-Mot frequency converter, 5x light barriersOptionally available:Side guide on one side and on both sidesSupports Features: angle: 90° KW: 0,18/S1, 0,75/S1 Roll width in mm: 450 Roll division in mm: 75, 100, 125 Conveyor speed m / s: freely adjustable Electric data: 380-500 Engine type: SEW Movi-Mot Nominal / outside width in mm: 510 / 650 Conveying length in mm ( ...

FHS roller conveyor transfer pusher transfer pusher ejector 90° 4300-510-450RA1960 Make: FHSRunning direction: both directionsRoller width (RB): 450 mmNominal/outer width (NB): 510 mm / 650 mm with chain guidelength: 4300 mm2x oversliderwidth of slider: 1500 mmdiameter rollers: 50 mmroller distance: 75/100/125 mmMotor overslider and roller conveyor: SEW motor 300-500VFrame height: 140 mm/250 with chain guideConveyor speed: freely adjustable with frequency converterScope of delivery: without supports, without side guide 1x Movi-Mot frequency converter, 5x light barriersOptionally available:Side guide on one side and on both sidesSupports Features: angle: 90° KW: 0,18/S1, 0,75/S1 Roll width in mm: 450 Roll division in mm: 75, 100, 125 Conveyor speed m / s: freely adjustable Electric data: 380-500 Engine type: SEW Movi-Mot Nominal / outside width in mm: 510 / 650 Conveying length in mm (& ...

FHS roller conveyor transfer pusher transfer pusher ejector 90° 4300-510-450RA1960 Make: FHSRunning direction: both directionsRoller width (RB): 450 mmNominal/outer width (NB): 510 mm / 650 mm with chain guidelength: 4300 mm2x oversliderwidth of slider: 1500 mmdiameter rollers: 50 mmroller distance: 75/100/125 mmMotor overslider and roller conveyor: SEW motor 300-500VFrame height: 140 mm/250 with chain guideConveyor speed: freely adjustable with frequency converterScope of delivery: without supports, without side guide 1x Movi-Mot frequency converter, 5x light barriersOptionally available:Side guide on one side and on both sidesSupports Features: angle: 90° KW: 0,18/S1, 0,75/S1 Roll width in mm: 450 Roll division in mm: 75, 100, 125 Conveyor speed m / s: freely adjustable Electric data: 380-500 Engine type: SEW Movi-Mot Nominal / outside width in mm: 510 / 650 Conveying length in mm (& ...

FHS roller conveyor transfer pusher transfer pusher ejector 90° 4300-510-450RA1960 Make: FHSRunning direction: both directionsRoller width (RB): 450 mmNominal/outer width (NB): 510 mm / 650 mm with chain guidelength: 4300 mm2x oversliderwidth of slider: 1500 mmdiameter rollers: 50 mmroller distance: 75/100/125 mmMotor overslider and roller conveyor: SEW motor 300-500VFrame height: 140 mm/250 with chain guideConveyor speed: freely adjustable with frequency converterScope of delivery: without supports, without side guide 1x Movi-Mot frequency converter, 5x light barriersOptionally available:Side guide on one side and on both sidesSupports Features: angle: 90° KW: 0,18/S1, 0,75/S1 Roll width in mm: 450 Roll division in mm: 75, 100, 125 Conveyor speed m / s: freely adjustable Electric data: 380-500 Engine type: SEW Movi-Mot Nominal / outside width in mm: 510 / 650 Conveying length in mm (& ...

FHS roller conveyor transfer pusher transfer pusher ejector 90° 4300-510-450RA1960 Make: FHSRunning direction: both directionsRoller width (RB): 450 mmNominal/outer width (NB): 510 mm / 650 mm with chain guidelength: 4300 mm2x oversliderwidth of slider: 1500 mmdiameter rollers: 50 mmroller distance: 75/100/125 mmMotor overslider and roller conveyor: SEW motor 300-500VFrame height: 140 mm/250 with chain guideConveyor speed: freely adjustable with frequency converterScope of delivery: without supports, without side guide 1x Movi-Mot frequency converter, 5x light barriersOptionally available:Side guide on one side and on both sidesSupports Features: angle: 90° KW: 0,18/S1, 0,75/S1 Roll width in mm: 450 Roll division in mm: 75, 100, 125 Conveyor speed m / s: freely adjustable Electric data: 380-500 Engine type: SEW Movi-Mot Nominal / outside width in mm: 510 / 650 Conveying length in mm (& ...

FHS roller conveyor transfer pusher transfer pusher ejector 90° 4300-510-450RA1960 Make: FHSRunning direction: both directionsRoller width (RB): 450 mmNominal/outer width (NB): 510 mm / 650 mm with chain guidelength: 4300 mm2x oversliderwidth of slider: 1500 mmdiameter rollers: 50 mmroller distance: 75/100/125 mmMotor overslider and roller conveyor: SEW motor 300-500VFrame height: 140 mm/250 with chain guideConveyor speed: freely adjustable with frequency converterScope of delivery: without supports, without side guide 1x Movi-Mot frequency converter, 5x light barriersOptionally available:Side guide on one side and on both sidesSupports Features: angle: 90° KW: 0,18/S1, 0,75/S1 Roll width in mm: 450 Roll division in mm: 75, 100, 125 Conveyor speed m / s: freely adjustable Electric data: 380-500 Engine type: SEW Movi-Mot Nominal / outside width in mm: 510 / 650 Conveying length in mm (& ...

Number of drill units 7 Number of tapping units 4 Number of clamps 8

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Technical data Number of positions: 16 Number of positions with indexationNumber of posit: 8 Number of working positions: 24 Tool lenght: max: 150 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 6500 kg Overall dimensions machine: Length: 9800 mm Width: 4000 mm Height: 2900 mm Various accessories: Positions CNC: 2 pce Oil mist extractor: ELBARON Bar loader number of bars

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Technical data Number of working positions: 14 Way of the table: 20 mm Workspace: 40 mm Screw diameter: 75/35/42 mm Spindle speeds: from: 3000 rpm up to: 18000 rpm Production capacity: 35 pce/min Machine´s weight about: 3500 kg Space requirement env.: 3 x 3 m2 Various accessories: Automatic loader