We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Treif model: 08 55 stainless dicer, max product 350mm x 90mm x 90mm, variable speed
used
Treif Falcon portion cutter with check weigher and sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, products up to -3° C, the machine is currently equipped for bonless products.
used
White 91 Portioning Machine used Hourly capacity approx.: 1400 portions Ejector diameter: 90mm (other plates on request) Strength adjustment via sliding handle at the front Machine with corresponding traces of use and wear, but in good condition neat and quiet run Machine must be thoroughly cleaned before use Video about test run available
used
Item: Marel IPM3 X300 Slicer and Portion Cutter Category: Cutter / Slicer Manufacturer: Marel Model: IPM3 x300 Year: 2004 Description: Used Marel IPM3 X300 Slicer and Portion Cutter with: • Stainless steel slicer and portion cutter machine • Rotating blade • Complete w/ laser eye weigher • Volume scanner m. INW3 x 400 • M Series 3000 controls Final verification by Marel This is an ideal machine to cut fish r meat in portions according to a pre-defined weight and dimension Video available
used
Capacity: up to 1800 pc/h Main motor power: 1 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 120 Lenght: 80 Height: 175 Delivery time: after the advanced payment machine is ready for delivery
used
White PF90/180-REG portioning machine used Hourly output approx.: 2000 servings Ejector diameter: 90mm (Other drums on request) Thickness adjustment via drum possible Operation via foot pedal, if you go down from it, the machine stops Poti for speed regulation is fixed, should be made viable, or replaced Machine with corresponding signs of use and wear but in good condition neat and quiet running Machine must be thoroughly cleaned before use New list price 2019 in this equipment: 16850,- EUR net Video about test run and other pictures available
used
Portion cutter Marel I-Cut 22 Dual-lane portion cutter for cutting a product into portions of exact weight. Laser scanning system provides 3-D scanning measures and as a result - high accuracy of cutting. Cutting speed is up to 1500 strokes per minute on each lane Power: 8 kW Electricity: 3 x 230 + PE V, 50/60 Hz
used
We sell here a vibrator / portioner from the manufacturer ISO-FLO, type MVIFD in a very good used and functional condition. The machine is built in 2004, runs on 400 volts, completely stainless steel, filling surface W / D / H 60 / 140 / 20 cm, workshop tested, immediately ready for use, dimensions W / D / H 200/90/75 cm, more on request.
used
SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.
used
SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.
used
PORTIONER, HANDTMANN MODEL: GMD99-1 Technical description: Serial number: 1052 Power: 220-240 V / 50-60Hz Pression: 7 bar/100psi Bandwidht: 220 mm Dimensions: 1600 x 900 x 1300 mm
used
Infinitely adjustable cutting thickness from approx. 0 to 42mm, max. approx. 160 cuts/minute. Push-button operation, voltage 400 V / 3.0 kW, chamber length 200 x 240 x 700 mm, 1 toothed knife ready for use. Infinitely adjustable cutting thickness from approx. 0 to 42 mm, approx. 160 cuts/per minute Push button operation, voltage 400 V / 3.0 kW, chamber length 200 x 230 x 700 mm, 1 toothed knife working condition.
used
Marel Grading line consisting of: DWU 225 weigher Serial No: A002514 C 300/460 Sorting conveyor - 10 pots Serial No: A002566 300mm wide belt - Intralox Modular
used
Chop Chopper / Portion Cutter / Chop Cutter Manufacturer: DMS (Dillmann Maschinensystem Saarbrücken) Type: DKS 701 Equipment: Cutting thickness infinitely adjustable: 1 – 30 mm Product size: 200 x 230 mm Insertion length: 700 mm including original instruction manual Machine solid stainless steel Specifications: 400V / 50 Hz / 2.45 kW / 16 A CEE plug Total dimensions: H135 x W180 x D80 cm Weight: 280 kg Year of construction: 2018 Stock machine, immediately available! Function tested / machine is ready for immediate use! Condition, see original pictures! If you have any questions, email or call. 03423-706493
used
Compact and versatile vacuum filler for small producers. An individual machine for the production of specialities and equipped with the proven double screw technology as used in large industrial machines. Double screws made out of stainless steel. Double screw housing made of high-quality industrial plastic approved for contact with food. The perfect solution for maximum cost-effectiveness, the HP3 is predestined for the transition from a piston filler to a Vemag vacuum filler. Can handle soft and firm masses. Minimu residual product volumes. Quick and easy cleaning. Perfect hopper infeed geometry for a continuous product flow. Hygienic vacuum ssytem with easily accesible cleaning area. Controls with 7 Touchscreen display and precise servo technology with intelligent control unit. The machine has only: 175 operating hours! Filling output: up to 2.000 kg/h. Portion weight: 0 - 100.000 gra ...
used
used Treif Falcon portion cutter incl. scale and the sorting station, year of construction 2006, portioning to exact weights, 360° scan for bone-in and boneless products, max. infeed length of 820 mm, depending on the product up to 240 portions per minute, the machine is equipped with a smooth curved blade for products without bones, bone-in version optionally available, products up to -3° C. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
Cutting capacity: 130 cuts/min, operating pressure: 7-10bar, connected load: 19kW, length: 1260mm, width: 2059mm, height: 1845-1895mm, weight: 1.5t, with documentation and frame for the molds, an on-site inspection is possible, but not under power.
used
On behalf of a friend I offer: 1 pc OEM pizza dough making and portioning machine with 2 funnels: a) 7.6cm for 400 - 800 grams b) 6,5cm for 210 grams According to my friend, the machine is about 10-12 years old and was only in operation for about half a year. He had bought them from a colleague and never used them himself (Gastoschließung)
used
unknow A9020411 (12-14)-
used
Operator Panel
used
unknow GE.570205.0002.00, part of the set-
used
Main Rack
used
BARCO HULPFUNCTIE 16 DIG OUTP
used
BARCO FLOPamp;KBRD INTF MNC95
used
Gear testing machine with chart recorder and electric drive manufacturer: unknown machine is designed for the inspection of gears accessories various module pins and mandrels has various hand cranks and adjustable settings and also an electric drive, with chart recorder you can see various rashes. in the camp under current vorfuehrbar, unfortunately no manual available. Are sold without any warranty