used NIIGATA Numerically Controlled Machining Centres

Bed milling machine make NIIGATA type 2 UMBFabr. -No: 26064S5316 Year 1973Table clamping surface: 300 x 1370 mmTable movement lengthwise = X: 870 mmTable movement across = Y: 280 mmVertical movement of the milling head = Z: 380 mmmin/max. Distance between table and clamping surface: 50/430 mmDischarge of the milling head: 330 mmSpindle mount: ISA 50Milling head can be swiveled horizontally to vertically12 spindle speeds: 40-1750 rpm9 feeds longitudinal and transversal: 20-800 mm / minvertical: 9-355 mm / minRapid traverse longitudinal and transverse: 3 m / minvertical: 1375 mm / minSpindle drive 380 V: 3.7 kWFeed drive 380 V: 1.5 kWSpace requirement: 2780 x 1750 x 1800 mmWeight: 2400 kgWith- 3-axis digital display- Cooling deviceused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not ...

Universal bed milling machine make NIIGITA type 2 UMCBuilt in 1986Technical specifications:Table surface: 1370 x 370 mmLongitudinal table travel X: 870 mmCross table travel Y: 370 mmUpright vertical path Z: 400 mmSpindle mount: ISA 5012 spindle speeds: 40 - 1750 rpm.9 feeds lengthways and crossways: 20 - 700 mm / minRapid traverse along and across: 3 m / min9 feeds vertical: 9 - 335 mm / minRapid traverse vertical: 1375 mm / minThroat: 350 mmDrive power: 5.5 kWDimensions L x W x H: 2000 x 1800 x 1745 mmWeight approx .: 2400 kgWith- Point route control Kirchfeld FK 82- Universal milling head- spindle brake- cooling device- high pressure vice- many ISA 50 tool holdersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offe ...

Please Find here with Details of NIIGATA 6L28HX Engine Available for Sale. MAKE:NIIGATA ENGINE MODEL:6L28HX ENGINE NUMBER:24186 KW:1838 YEAR:2007 Kindly advise your interest

2 x 2.9MW 60Hz NIIGATA 18V22AG Gas Power Plant for sale NIIGATA says that 18V22AG has a high electric thermal efficiency of 40% or more and the 22AG engine produced 30% higher power than a conventional spark ignition gas engine with the micro-pilot compression ignition system. Produced in 2004, this generating sets had been successfully operated about 32,000 hours and had a good condition as seen in the photos and the plant was dismantled and has been well preserved in our factory and ready for immediate delivery. Main Specifications: - Engine Model: 18V22AG x 2 sets - Maker: NIIGATA - Continuous Output: 2880kWe x 900 rpm - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2004 - Running Hours: abt. 32,000 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set ■ Main Specifications ▣ Gas Engine Maker NIIGATA Model 18V22AG Quantity 2 sets Ye ...

Please Find here with Details of Available good condition Niigata Engine for Sale MAKE - NIIGATA TYPE - 8L28HX Kw - 2206 RPM - 750 Running Hours - 18000 Weight - 21500 Year - 2011

Universal bed milling machine make NIIGATA type 2 UMCMachine -No: 62950 Year 1986Table size: 1370 x 310 mmTable longitudinal path = X: 870 mmTransverse travel = Y: 370 mmVertical travel = Z: 400 mmDistance table to spindle: 50 - 450 mmSpindle mount: ISA 5012 spindle speeds: 40 - 1750 rpm.9 longitudinal and transverse feeds: 20 - 800 mm / min9 vertical feeds: 9 - 355 mm / minRapid traverse longitudinal and transverse: 3000 mm / minRapid traverse vertical: 1375 mm / minDrive power: 5.5 kWFeed motor: 1.5 kWDimensions L x W x H: 1825 x 2005 x 1745 mmWeight approx: 3000 kgWith- 3-axis digital display Anilam- Milling head can be swiveled from vertical to horizontalused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and a ...

Univ. Bed milling machine make NIIGATA type 3 UMAYear 1978Table surface: 1600 x 380 mmTable longitudinal path X: 1000 mmTransverse Y: 420 mmVertical path Z: 400 mmSpindle mount: ISA 5016 spindle speeds: 45 - 1400 rpm9 feeds longitudinal and transversal: 20 - 800 mm9 vertical feeds: 5 - 200 mmRapid traverse longitudinal and transverse: 3000 mm / minxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 vertical: 750 mm / minMax. Table load: 700 kgMax. Distance between stand / spindle: 470 mmMax. Distance table / spindle head: 70 - 470 mmDrive power: 11 kWWeight: 3.9 tExternal dimensions: 2245 x 2280 x 1830 mmused, despite the year of construction ingood conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.B ...

1.7MW 50Hz HFO Brand New STX-Niigata 8L22HLX CPP

2 x 2.8MW 50Hz 133Hrs DO NIIGATA 12V26HX Power Plant We are offering a nice and urgent sale of 2 sets of NIIGATA 12V26HX generating set with very short 133 running hours because they had been used as emergency backup ones. Both engine and generator had been kept very clean and in excellent condition. The scope of supply includes 2 diesel generating sets, 2 control units, 1 duplication oil supply unit, 1 air compressor, 2 heat exchangers and all the items were dismantled, packaged and have been stored at warehouse in Japan and are ready for buyer’s immediate inspection and delivery. Main Specifications Maker NIIGATA Model 12V26HX Quantity 2 sets Year of Manufacture 2003 Output 2,800kWe Speed 1000rpm Bore 260mm Fuel Oil Diesel Oil Running Hours only 133 hours (used only emergency backup )

Make: Niigata Model: 16V20FX Mfg year: 2004 Condition: Unused / New Qty: 2 Output: 4000 kW Speed: 1650 RPM Engine number: 23221 Contact us infoheeyas.co.uk #Niigata #generator #engine #marine #marinegenerator # marinegenset #dieselgenerator #ship #vessle #shipengine #shipgenerator

x-travel: 2120 mm y-travel: 1000 mm z-travel: 850 mm Control: Fanuc table surface area: 3600x1300 mm dividing head: CNC Tool changer: 60 Pos total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Niigata 2 x 18V22AG Gas Generating Sets with Auxiliaries These 3-phase generators are manufactured by Niigata in 2005. Engines are V-18 type, cylinder bore is 220mm and stroke 300mm. Engines are started by air motor and they have engine driven lubrication pump. Generators are equipped with anti-vibration rubber pads. Engine rotates clockwise viewed from the generator side. Scheduled 30 000 hours’ maintenance was carried out to both engines in April 2019. Plant control system, mechanical indoor auxiliaries and MCC cabinets belongs to the scope of supply. Both units were in operation till autumn 2020 and dismantled in 2021. Techncial Data: Product Gas Engine Generators with auxiliaries Model Niigata18V22AG Electrical output 2880kWe Manufacturing year 2005 Number of gensets 2 pcs Running hours approx. 31300 / engine Rotation speed 900rpm Voltage 3450V / 60 Hz Frequency  ...

x-travel: 870 mm y-travel: 370 mm z-travel: 400 mm number of feeds: 9 feed range lengthways and crosswise: 20-800 mm rapid traverse longitudinal and cross: 3000 mm/min rapid traverse vertical: 1375 m/min table-size: ca. 310x 1370 mm throat: ca. 330 mm weight of the machine ca.: 2,4 t dimensions: ca. 1900 x 2800 x 1800 mm cover plates available (these are missing in the pictures, but they are there!) manual available! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

Machining Center - Universal HURON KX 15 Bearing No. 1105-01908 Make Huron Type KX 15 Built in 2002 Condition Used machine Control CNC SIEMENS 840D POWERLINE Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-way 800 mm y-way 1000 mm z-way 550 mm Spindle holder ISO SK 40 Spindle speeds 18000 rpm inner cash supply 30 bar b-axis +20/-100 c-axis 360 Control SIEMENS 840D POWERLINE Factory weight 500 kg Number of tools in the magazine 30 pieces Total power requirement 53 kW Description - 5 AXIS UNIVERSAL MACHINE CNC control SIEMENS 840D Tool changer 30 pcs SK 40 5 axes simultaneously C-axis 360 , A-axis +20/ - 100 " , TABLE BY 630 mm, 30 BARS IKZ additional, accessories SPAENEFOERDERER

Table size: 700 x 1200 mm traverse path x/y/z: 600/300/350 mm spindle retainer: SK 40 ISA kl. / gr. Table/spindle distance: 150/540 mm spindle speeds: 45-6000 rpm number of tool stations: 12 pieces feeds: 5000-20000 mm / min rapid traverse rate: 5000-20000 m / min spindle drive: 5.5 kW Electr. Supply: 380 V, 12 kVA kW space: 2350 x 2100 x 2500 mm weight: 3800 kg

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

3-axis machining center X: 560 mm Y: 500 mm Z: 390 mm Rapid traverse rate: 4 m / min Table load: 800 kg Speed range: 4000 RPM Spindle retainer: SK 40 Headstock speed range: 4000 RPM Spindle drive: 4 kW Control: Dialog 11 Electr. Handwheel Coolant system direct measuring system Documentation Total power: 19 kW Machine weight: approx. 2.8 kg Dimensions (W x D x H): 3.66 x 3.5 x 2.1 m

Table size: 410 x 900 Traverse path x/y/z: 560/410/380 mm spindle retainer: SK 40 spindle speeds: 22-6000 rpm feeds: x & z to 10000, y up to 240 mm / min space: 2600 x 2000 x 2300 mm weight: 3500 kg

Table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: MAS BT 40 ISA kl. / gr. Table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kW Electr. Connection: kW 400 V

Machining center - vertical PRIMINER DELTA CENTER V6L camp-Nr. 1105-02424 category machining center - vertical make PRIMINER type DELTA CENTER V6L year 2018 State second-hand machine control CNC storage France origin country Germany Delivery time immediately cargo base EX WORK HAGUENAU Technical details x way 600 mm y-way 400 mm z-way 450 mm overall power demand 20 kW machine weight approx. 3.5 t description machine new with aim Electr. Establishment, coolant system IKZ 20 BARS, Techdoc. CNC SIEMENS 828 3D technical specifications DELTA CENTER V6L CNC control SIEMENS 828 3 D Table dimensions mm 750 X 400 MM T-slots 14 x 3 x 125 mm Maximum table load kg 350 X/Y/Z stroke mm 600 / 400 / 450 Distance spindle/table surface mm 80-530 Distance spindle Center / Z axle cover 435 mm Spindle retainer for SK 40 / 120 mm Spindle speed RPM 10,000 Spindle motor kW 20 SK 40 7/ ...

CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50

: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to 18,000 min-1 Feeds up to 50 m / min Rapid traverse 50 m / min Space requirement approx. 5 x 4 x 2.8 m (see floor plan) Weight approx. 13 to Shipping dimensions approx. 12 lane mete ...

Table size: 460 x 1000 mm traverse path x/y/z: 762/460/460 mm spindle retainer: MAS BT 40 ISA kl. / gr. Table/spindle distance: 150/610 mm spindle speed: 15000 rpm number of tool positions: 32 pieces spindle drive: 22 kW Electr. Supply: 400 V kW space: 3100 x 2500 x 2750 mm weight: 7500 kg