used MASSEY FERGUSON Telescopic loaders

The tractor has 16,133 engine hours. When the tractor had just over 10,000 engine hours, the engine was replaced and a new one was installed.

Power 188 KW, displacement 8419 ccm, Diesel, NOTE: The attached pictures of this position are for documentation purposes only, the real pictures of the position will be created and attached in due course!!

Power 216 KW, displacement 8419 ccm, Diesel, abgel. Running hours 7433 hrs

Power 216 KW, displacement 8419 ccm, Diesel, abgel. Running hours 7433 hrs

Round table FERGUSON Pt182RH15752 - see pictures

Type 5 Nominal weight of falling parts 1750 kg Impact energy, not less than 4878kgm Number of strokes per minute 85 Max. ram stroke 890mm Diameter of ram 455mm Ram pallet face 405x305mm Anvil pallet face from floor 535mm Height above floor 4040mm Baseplate 4405x2085mm Motor rating 110 kW Weight 40000kg Weight without anvil block 25000kg

weight max.: 3,5 t Lifting height: 7000 mm weight: 7070 kg Motor Capacity: 77 kW Third control circuit: allowable maximum weight: 9,2 T Four wheel steering: 0 tire equipment: 400/80-24 Number of working hours: 9250 h motor: Perkins Diesel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3169 Sennebogen 613M-B year/Year of construction 1996 approx. 7610 hours/hours 18 t Telescopic crane, 4 outriggers, 76 KW, with reversing camera Telescopic crane, 4 outriggers, 76 KW, with reversing camera

- year of production 2017 - hour meter reading 2770 mth - road lighting - Rear view camera - Work lights - 55 kW (75 hp) engine at 2200 rpm, 400 Nm torque at 1300 rpm - maximum lifting capacity 4000 kg - maximum lifting capacity at a maximum extension of 1250 kg - raised boom 13.78 m - hydraulic system pressure 260 bar -poppy. Pump flow 110 l - Torque converter, 4-speed powershift transmission - travel speed 29 km/h - servo-assisted service brake, hydraulic - Front work light - rotating warning indicator - Tires in very good condition - Electrical drive control - Front axle differential ratio - Windscreen and upper window cover -air conditioning -Leveling - 3 steering modes - on-board computer

ID2982 Manitou MT1745 year/Year of construction 2004 approx. 7000 hours/hours Telehandler, with 2 outriggers, with fork telescopic handler, with 2 outriggers, with fork

Specifications load Bearing load: 80 kg Further data and types Number of axes: 3 Repeatability: +/-0.1 mm Weight: 1200 kg

Technical data: Loads Load: 70 kg Additional load: 20 kg Workspace: Max range: 1720 mm More info and versions: Number of axes: 4 Repeat accuracy: +/-0.1 mm Weight: 1050 kg to 1200 kg

for material Ã?: 6-80 mm for rod lengths: 100-915 mm Recording size: 945 x 800 mm Working height: 1400 mm height adjustment: +/-200 mm Electr. Connection: 220 V Space requirements: 3420 x 1150 x 1500 mm Weight: 300 kg

was connected to Gildemeister GMC 20

YEAR: 1989 CNC: FANUC 0T TORNIBILE: 300 mm TURNBACK LENGTH: 300 mm MANDRINO: MANDRINO ATTACK: 6 ASA BARRA CAPACITY: 56 mm ROTATION SPEED: 3240 rpm POWER: 26 Kw AXIS C: 360 degrees I TORRETTA: PORTASSTATION STATIONS: 12 Nr. MOTORS: 6 Nr. MANDRINO: MANDRINO ATTACK: 6 ASA ROTATION SPEED: 3240 rpm. POWER: 26 Kw AXIS C: 360 degrees The TORRET: PORTASSTATION STATIONS: 12 Nr. RELATED: 6 nr

Capacity: 4.000 crates / h (at palletizer / depalletizer) Presently equipped for: Bottles: 0,50l GdB Kropfhals 0,70l Zwiebelhalsflasche 0,75l Heilwasserflasche 1,00l GdB Leichtglasflasche 1,25l GdB Leichtglasflasche Crates: GdB crates with 12 bottles, short side leading GdB crates with 20 bottles, short side leading Pallet: EURO pallet 1200 x 800 mm consisting of: 1 Depalletizer make: Kettner type: Pressant Duplex 2NT 1136 year: 2000 1 Palletizer make: Kettner type: Pressant Duplex 2NT 1176 year: 2000 1 Pallet Pressure Control make: Kettner year: 2000 1 Empty Pallet Magazine make: Kettner type: ST year: 2000 1 Empty Pallet Magazine make: Kettner type: ST/EST EURO year: 2000 1 Pallet Destrapper make: Born type: PAE year: 1986 Crate Conveying System make: Krones type: Multico ...

Spindle circle 165 mm Interface Gildemeister GM 16 AC

Rod diameter 8 - 80 mm Rod length 1,000 - 2,100 mm Connection power 5 kVA Machine weight 950 kg

Loading caterpillar Hanomag D 600 functional, top engine

Backhoe loader, multifunction device with engine damage otherwise good substance, new tyres at the rear

Pallets are checked for damage