37042 offers used vertical knee-type milling machines Mas Tos

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159854566
New in: 1991
used
Seller: country-de SKM Industriemaschinen

bore capacity in steel (diameter): 50 mm arm length: 1600 mm bore capacity in cast iron: 60 mm max. distance baseplate: 1505 mm spindle taper: MT: 5 spindle stroke: 310 mm spindle turning speed range: 28 - 2500 (16) U/min spindle feeds:: 0,5 - 2 U/mm threading:: M50 x 1,5 Stahl total power requirement: 6 kVA weight of the machine ca.: 4,3 t dimensions of the machine ca.: 3,1 x 1,1 x 3,4 m - 2 clamping cubes 550 x 550 x 550 mm - Cooling device - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160258197
New in: 1983
used
Seller: country-de FEYEN Maschinen GmbH

Bohrleistung in Stahl (-Ø: 50 mm throat: 1500 mm workpiece height max.: 1380 mm Bohrleistung in Guß (-Ø: 60 mm Abstand Spindelmitte bis Säule: 320 - 1250 mm swival range +/-: 180 ° base plate surface area: 2640 x 1000 mm max. torque on the spindle: 310 Nm Bohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mm spindle turning speed range: 28 - 2500 U/min feed:: 0,05 - 2 mm/U power capacity: 4 kW weight of the machine ca.: 4,3 t cube table 500 x 500 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines / Vertical Milling Machines
Latest update: 14.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160023006
New in: 2017
used
Seller: country-cz GINDUMAC GmbH

BRAND: KOVOSVIT MAS YEAR: 2017 MODEL: MCV 1000 Speed PRODUCTION HOURS: 10149 APPLICATION TYPE: MILLING LOCATION: CZECH REPUBLIC MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 4600 MM MEASUREMENTS DEPTH: 3600 MM MEASUREMENTS HEIGHT: 3330 MM MACHINE WEIGHT: 11500 KG CONTROL UNIT BRAND: HEIDENHAINMODEL: ITNC 530 MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 12000 1/MIN NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 1016 MM Y-AXIS MOVEMENT: 610 MM Z-AXIS MOVEMENT: 720 MM WORKPIECE WORKPIECE Z: 520 MM WORKPIECE WEIGHT: 1200 KG TABLE OUTER LENGTH: 1300 MM OUTER WIDTH: 670 MM TSLOTS SIZE: 5 DISTANCE BETWEEN: 125 MM MEDIA POWER CONSUMPTION: 55 KVA Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - SPINDLE POWER (S1/S6 - 40%) 32 / 48 KW - S ...

Category: 101 boring mills and machining centers / Vertical Numerically Controlled Machining Centres
Latest update: 01.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160203257
New in: 2017
used
Seller: country-cz AMARON s.r.o.

Inv. Num. : 6149 Type: MCV 1270 R Producer: MAS Generated: 2017 Parameters: Control system: HEIDENHAIN Operating hours: 19530 h Tool magazine: 24 pieces Maximum vertical spindle speed: 8000 1/min Travel X-axis: 1270 mm Travel Y-axis: 610 mm Travel Z-axis: 720 mm Equipment: IKZ Workpiece probe Renishaw Tool probe Renishaw Conveyor

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 28.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 85349974
used
Seller: country-it Mimu Werkzeugmaschinen

High quality - Low price! Radial drill MAS VR5A Arm 1600mm Max dia in steel 50mm Max dia in cast iron 60mm Max threading in steel M30 Max threading in cast iron M42 MT 4 Spindelmotor 4 kW - 28 - 2500 RPM Distance table-spindle nose 1600 mm Clamiping area 1800 x 1000 Weight 3,7 Ton

Category: 102 lathes / CNC Turning Machines
Latest update: 16.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157239544
New in: 2015
used
Seller: country-de GINDUMAC GmbH

Overview BRAND: MAS YEAR: 2015 MODEL: MASTURN MT 550 PRODUCTION HOURS: 7398 APPLICATION TYPE: TURNING LOCATION: ESTONIA MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: HEIDENHAIN Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2538 MM MEASUREMENTS DEPTH: 1920 MM MEASUREMENTS HEIGHT: 1755 MM MACHINE WEIGHT: 3200 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: MANUALPLUS 620 CNC MAIN LANGUAGE: ENGLISH MAIN DRIVE SPINDLE SPEED RANGE: 3000 1/MIN SPINDLE BORE: 82 MM MOVEMENT X-AXIS MOVEMENT: 285 MM Z-AXIS MOVEMENT: 890 MM WORKPIECE WORKPIECE WEIGHT: 600 KG MEDIA POWER CONSUMPTION: 30 KVA ADDITIONAL EQUIPMENT - TURRET DUPLOMATIC WITH NEXT TOOLHOLDERS - RADIAL TOOL HOLDER B2, 30X20X40 - RADIAL TOOL HOLDER B2, 30X25X44 - BORING BAR HOLDER E2-30X12 - BORING BAR HOLDER E2-30X16 - BORING BAR HOLDER E2-30X20 - BOR ...

Category: 101 boring mills and machining centers
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218548
used
Seller: country-nl Mach4metal

Drilling capacity: 32 mm Radius: 1000 mm Spindle taper: 24   MACH-id    5451 MAKE         MAS Kovosvit TYPE           VO 32 YOP             1992 SPECIFICATIONS Arm Length        1000 mm Max. drill Ø cast         40 mm Max. tap Ø        24 M Stroke pinole          250 mm Max. distance spindle - table         270 mm Min. distance spindle - table         1040 mm Floor / table area          1150 x 800 mm Speeds / ranges            4500 Rpm Spindle Taper           4 ISO/Bt/Mk Column sleeve          300 mm Power&nbs ...

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 10.06.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 136406250
New in: 1977
used
Seller: country-cz

VR 4A/1250 Producer Mas Max. drilling diameter 50 mm Max. vertical arm adjustment 750 mm Taper in spindle 4 Morse Main motor output 4 kW Dimensions l x w x h 2250x1055x2970 mm Machine weight 2700 kg

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 01.07.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 136406253
New in: 1980
used
Seller: country-cz
Price: 1.950 €

Type VR 6A Producer Mas Max. drilling diameter 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 01.07.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 136406259
used
Seller: country-cz

Maximum drilling diameter in steel 50 mm Max. and min. Distance spindle axis to leadership mantle 2070/1170 mm Vertical arms (stroke), 1290 mm Horizontal adjustment arm (travel) 900 mm Filming headstock 360 ° Travel sleigh bed for 1200 mm spindle number of degrees 15 range 15-800/min Main motor power 4 kW Total machine input kVA 12 Weight 6500 kg

Category: 101 boring mills and machining centers
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218644
used
Seller: country-nl Mach4metal

Drilling capacity: 40 mm Radius: 1000 mm Spindle taper: 60   MACH-id     5301 MAKE          MAS Kovosvit TYPE            VO 32 YOP              1993 SPECIFICATIONS Max. drill Ø steel        32 mm Max. drill Ø cast         40 mm Max. tap  Ø     20 M Arm Length        1000 mm Stroke pinole        250 mm Column sleeve        220 mm Quill Ø    60 mm Spindle Taper ISO/Bt/Mk       4 ISO/Bt/Mk Speeds / ranges       4500 Rpm Table Length           1150 mm Table Width             800 mm Power         ...

Category: 101 boring mills and machining centers
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218762
used
Seller: country-nl Mach4metal

Drilling capacity: 60 mm Radius: 1600 mm Spindle taper: 48   MACH-id   422 MAKE        MAS Kovosvit TYPE          VO 50 YEAR          2003 SPECIFICATIONS Arm Length      1600 mm Drilling capacity     60 mm Drilling capacity steel Ø    50 mm Drilling capacity cast iron Ø   60 mm Tapping M    48 Spindle taper Mk  5 Spindle diameter Ø   55 mm Spindle travel    310 mm Floor / table area      1470 x 986 mm Power      6 kW Spindle speeds / ranges    2500 Rpm DIMENSIONS Length      2900 mm Width        1120 mm Height       3390 mm

Category: 101 boring mills and machining centers
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158218831
used
Seller: country-nl Mach4metal

Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 0   MACH-id   3997 MAKE   MAS Kovosvit TYPE    VO 50 / 1600 YEAR    1995 SPECIFICATIONS Arm Length    1600 mm Drilling capacity   60 mm Drilling capacity steel Ø 50 mm Drilling capacity cast iron Ø  60 mm Tapping MM   50 Spindle taper Mk   5 Spindle diameter Ø  55 mm Spindle travel   310 mm Floor / table area    1470 x 986 mm Power    6 kW Spindle speeds / ranges    2500 Rpm DIMENSIONS Length   2900 mm Width    1500 mm Height   3200 mm

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 16.12.2019 add to watchlist
approved
dealer
ankerimg
item-No.: 144064376
used
Seller: country-de Tavsit UG

Radial drilling machine boom drill MAS VR 6 Description: Drilling capacity St / GG: 63 mm Extension: 2000 mm Spindle holder: MK 5 Drilling capacity in cast iron: 80 mm Workpiece height - max.: 1850 mm Spindle speeds: 20 - 1800 rpm Drilling depth max.: 380 mm Thread cutting: 64 x 4 pcs 60 Spindle diameter: 45 mm Total power requirement: 6 kW Machine weight approx.: 6.4 t Room requirement approx.: 3.2 m x 1.1 m x 3.8 m

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 23.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 152572758
new
Seller: country-nl

Radial drilling table Dimensions LxWxH 600 x 750 x 550 mm Tilting 0o - 90o This radial drilling table is unused

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156723200
used
Seller: country-be APT

Mas VO-63P Admission in drilling-spindle (morse): Mk5 Max drilling capacity: 80 mm Base dimensions (1) Table dim (2) : 2300 x 1100 mm Longitudinal travel drilling-head (X-axis): 1600 mm Height-travel arm (Y-axis): 1000 mm Min dist. round column--drillingsp (X-axis): 535 mm Max dist.round column -- drillingspindle: 1865 mm Speeds: 2000 rpm Power on the spindle: 10 kW Weight: 7,1 ton

Category: 101 boring mills and machining centers
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158219272
used
Seller: country-nl Mach4metal

Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 310   Make MAS Vo 5 Type Kovosvit VO 50 / 1600 Year 1999 radial drilling radial bohrmaschine boormachine Tapping capacity (mm) M 48 Drilling capacity (mm) 50 mm Distance Column/center (throat) mm1600 mm Tapping depth (mm)310 / Mk 5 Table 1470 x 986 Torq 310 Nm 2500 Rpm

Category: 101 boring mills and machining centers
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158219318
used
Seller: country-nl Mach4metal

Drilling capacity: 50 mm Radius: 1000 mm Spindle taper: 48   Make MAS VRM 50 A Type VRM 50 A Year 70 er mobile - universal radial - kessel radiale Tapping capacity (mm) M 48 Drilling capacity (mm) 50 Distance Column/center (throat) mm Spil - Column 2.070 Tapping depth (mm) Spil - Table 1.550 Movement on X = 1.000 7 Axis  

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 23.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158481814
used
Seller: country-nl

Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm

Category: 104 grinding machines / Surface Grinding Machines
Latest update: 07.11.2022 add to watchlist
ankerimg
item-No.: 158859385
New in: 1986
used
Seller: country-sk ENGINEX KOSICE

Table clamping surface: 400x2000mm Max grinding width: 400mm Weight of the machine: 13t

Category: 102 lathes / CNC Turning Machines
Latest update: 21.11.2022 add to watchlist
ankerimg
item-No.: 159058946
New in: 2019
used
Seller: country-cz

Control Heidenhain ... Manual Plus 620 Turning diameter ... 500mm Rotation length ... 900mm Spindle bore ... 82mm Turret Spindle speed... 0-3000 rpm. Tool turret ... 8/0 Circulation diameter via support... 350mm workpiece weight ... 400/1000kg L x W x H ... 2538 x 1920 x 1755mm Machine weight ... 3200kg Main engine power ... 17kW Total power requirements ... 30kVA The machine is in good condition, possible to test under power.

Category: 102 lathes / CNC Turning Machines
Latest update: 21.11.2022 add to watchlist
ankerimg
item-No.: 159236636
New in: 2002
used
Seller: country-cz

Control Heidenhain ... Manual Plus M Turning diameter... 500mm Rotation length ... 1500mm Spindle bore ... 83mm Turret Spindle speed ... 0-3000 rpm. Machine weight ... 3200kg L x W x H ... 2538x3238x1920mm Main engine power ... 17kW workpiece weight ... 1000kg The machine is in good condition, possible to test under power.

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 09.07.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159348691
New in: 1988
used
Seller: country-de Beppo Bercht Werkzeugmaschinen

drilling diameter in mild steel 32 mm diameter during thread cutting 20 mm Projection 1,000 mm Power requirement 3.5 kW Machine weight approx. 1.7 t Accessories: Cube table

Category: 104 grinding machines / Surface Grinding Machines
Latest update: 08.09.2022 add to watchlist
ankerimg
item-No.: 159776409
used
Seller: country-sk ENGINEX KOSICE

Surface grinding machine BPV 300/1000.

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 09.09.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159783944
New in: 2000
used
Seller: country-nl Vramac Machines bv

Code 220906 Description Radial drilling machine Make MAS Kovosvit Modell VO 50 x 1600 Serial No. 4153 Year 2000 Capacity in Steel 60 50 mm Capacity in Cast Iron 26 60 mm Spindle taper 5 MK Spindle radius 1860 mm Min/max height spindle / top of base plat 320 / 1505 mm Arm traverse 875 mm Spindle traverse 310 mm Number of speeds 16 steps Speed range 28 - 2500 rpm Feed range 0,05 – 2,0 mm/rev. Working surface base plate 1820 x 1000 mm Base plate 2640 x 1000 mm Working height max. 3396 mm Motor spindel 4 kW Total power 6 kW 380 Volts Size for transport 3250 x 1120 x 2730 mm (L x W x H) Weight of machine 4500 kg Accessoiries Box 550 x 550 x 550 mm Automatic Clamping Pre Select for speeds and feeds Coolant Condition Machine is in very good ( as new ) condition

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 10.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159995429
used
Seller: country-dk S. H. Vaerktojsmaskiner ApS

Technical data: Travel along arm: 1.600 mm Max. voltage: 380 volt 50 HZ

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 10.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159995428
used
Seller: country-dk S. H. Vaerktojsmaskiner ApS

Technical Data: Spindle travel along arm: 1.614 mm Max. vertical movement of arm: 950 mm Max. drill diameter: 63 mm Spindle cone: 85 h6 Taper: 5 MORSE Max. spindle movement: 380 mm Max/min spindle reach: 2.000 / 386 mm Max/min distance from spindle to table: 1.865 / 535 mm Table dimensions: 2.300 x 1.100 mm Spindle speed: 11 – 2.000 rpm Spindle gears: 16 Feed rate: 0,035 – 2,8 mm/rpm Feed gears: 16 Motor: 5,5 kW Total output: 7,3 kVA Length: 3.700 mm Width: 1.380 mm Height: 4.050 mm Weight: 6.900 kg

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 10.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159995432
used
Seller: country-dk S. H. Vaerktojsmaskiner ApS

Technical Data: Travel along arm: 1.250 mm Max. drill diameter: 50 mm Max. spindle movement: 310 mm Spindle speed: 28 – 2.500 rpm Max. work height: 1.500 mm Table dimensions: 1.820 x 986 mm Taper: MK 5 Feed: 0,05 – 2,00 mm/rpm Power: 380 V / 50 Hz, 4 / 22 kW Weight: 4.600 kg Dimensions: 3.100 x 1.120 x 3.400 mm

Category: 101 boring mills and machining centers / Radial Drilling Machines
Latest update: 10.10.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159995434
used
Seller: country-dk S. H. Vaerktojsmaskiner ApS

Complete with hydraulic lock on arm travel Technical data. Max. boring capacity: 32 mm Max. boring capacity cast iron: 45 mm Max. thread cutting: 20 x 2,5 mm Max./ Min. spindle travel: 250 – 1000 mm Spindle: Morse cone 4 Max. spindle movement: 250 mm Spindle speed: 90 – 4500 rpm Speed steps: 12 steps Motor: 2,2 kVA Number of feeds: 6 pcs Dimensions: Length: 1700 mm Width: 1070 mm Height: 2620 mm Accessories: Cross table Pneaumatic round table

Category: 404 carton packaging machines
Latest update: 02.12.2021 add to watchlist
approved
dealer
ankerimg
item-No.: 18006472
New in: 2006
used
Seller: country-de MHS SYSTEMBAU Verpackungstechnik
VS

If you are interested we will send you photos! MACHINE DESCRIPTION: The MAS tray packer is a packaging machine that folds and glues an open tray (from a cutting) around the product formation. FORMATION: The machine sets 2 x 5 = 10 Tetra packs per tray. Machine dimensions: 3500-4500mm long depending on infeed conveyor. 2008mm width; Height 2000mm Performance: max 10 trays/min Electrical connection: 5% 50 Hz, 3-phase, 230/400 volts, approx. 8kW Energy consumption: 6 kWh Frequency 50 Hz 2% active power 1.18 kW Volume < 80 dB Electrical equipment: brand products, in accordance with standard MAS machine no. 6017, built 06/2006 Cabinet: Make Rittal V2A firmly installed on machine Pneum. Equipment: Make Festo Glue device: Nordson (3.6 kg tank capacity) with 2 hose system; Glue order volume with proportinal valve Compressed air: 6 bar (dry, oil-free) Air consumption: approx ...

Category: 109 other metal working machines
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159285288
New in: 1998
used
Seller: country-de
Price: 16.500 €

Radial drilling machine KOVOSVIT - MAS type VO 50-1600 Machine No. 3869 Year of construction 1998 Drilling capacity (steel) 50 mm Drilling capacity (casting) 60 mm Spindle holder MK 5 Nominal projection 1600 mm Largest projection of the spindle 1500 mm (to the column) smallest projection of the spindle 230 mm (to the column) Distance spindle nose - clamping surface 630 - 1520 mm Boom Height adjustment 890 mm Pinol stroke 310 mm Clamping surface 1820 x 986 mm Spindle speed 28 - 2500 rpm 16 stages Feed 0.05 - 2 mm/U 16 stages Motor power - Drilling spindle 4 kW Mains connection 380 volts, 50 Hz spindle speed over 16 gear stages - Right-left rotation of the drilling spindle via hand lever switch - Thread cutting device up to M42 in cast iron, M30 in steel - motorized height adjustment of the boom on precise rectangular guides - hydr. Central clamping coolant device at the machine base Space ...

Category: 101 boring mills and machining centers
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156649216
New in: 1980
used
Seller: country-de FEYEN Maschinen GmbH

bore capacity in steel (diameter): 70 mm arm length: 2200 mm workpiece height max.: 1500 mm table surface area: 1900 x1000 mm bore spindle diameter /taper: MK 6 mm bore spindle turning speed range: 11,2 - 2000 U/min bore feed range: 0,035 - 2,8 mm/U bore spindle stroke: 400 mm distance spindle/base plate: 870 / 1870 mm spindle movement - horizontal: 1600 mm voltage: 380 V / 50 V spindle drive: 5,5 kW total power requirement: 10 kVA weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,3 x 1,2 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 110 accessories for machine tools / Clamping Cubes
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156797307
used
Seller: country-de A+B Werkzeug Maschinen Handels GmbH

table length: 645 ( 350 ) mm table width: 18,5 mm table height: 1045 mm T-slots: 40 x 18 x 8,0 mm weight: ~ 650 kg Furnishing : - 2x pieces of robust clamping angles (T-shape) - rear ribs - 7x T-slots 40 x 18.0 x 8.0 mm per bracket The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 110 accessories for machine tools
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156887739
New in: 1997
used
Seller: country-de SK Maschinen-Service GmbH

length: 1350 mm width: 950 mm height: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 110 accessories for machine tools / Drilling Cube Tables
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157045821
New in: 1980
used
Seller: country-de Christoph Busch GmbH

table length: 550 mm table width: 550 mm table swivelabel +/-: 90 ° no. of flutes: 4 weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157248291
used
Seller: country-de
Price: 650 €

Copy part head, copy head, part head -Copy head: for cams -Dimensions: 900/400/H270 mm -Weight: 90 kg

Category: 102 lathes / CNC Turning Machines
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157894882
New in: 2007
used
Seller: country-de Gustav Schönberger GmbH

turning diameter: 465 mm turning length: 1000 mm control: Sinumerik 810D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Sinumerik 810D CNC control 3-jaw chuck C-axis driven tools turret (VDI50) tail stock chip conveyor coolant device Technische Daten: / technical details max. Schwingdurchmesser / max. rotary diameter 680 mm max. Drehdurchmesser / max. turning diameter 465 mm max. Drehdurchmesser über Schlitten / max. turning diameter over sledge 355 mm max. Drehlänge / max. turning lenght 1000 mm Verfahrweg X / travel X 295 mm Verfahrweg Z / travel Z 1105 mm max. Drehzahl / max. spindle speed 3800 UpM/rpm max. Drehzahl angetr. WKZ / max. speed of driven tools 20-3500 UpM/rpm max. Stangendurchlass / max. rod admission 80 mm Anzahl der Revolverplätze / numbers of tool places 12 Eilganggeschwindigkeit X,Z / rapid feed x,z  ...

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 01.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158446168
New in: 2014
used
Seller: country-cz AMARON s.r.o.

Inv. Num. : 5827 Type: MCU 700V-5X SPRINT Producer: MAS Created: 2014 Parameters: Control system: HEIDENHAIN Table height: 920 mm Maximum table load (uniform): 850 kg Number of synchronized axes: 5 pieces Maximum spindle speed: 18000 1/min Travel X-axis: 700 mm Travel Y-axis: 820 mm Travel Z-axis: 550 mm Total power requirement: 85 kVA Fast feed: 60 m/min Number of stacking positions: 64 A-axis: 30/120 st Axis C: 360 st Machine height: 2950 mm Machine length: 4200 mm Machine width: 2400 mm Machine weight: 18000 kg

Category: 706 beverage machines
Latest update: 15.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158766193
New in: 2017
used
Seller: country-ch Dreier Oenotech SA

- Special: with carton box passage - Very few operating hours - Condition technically and optically practically as good as new Dimensions: - Length: 3300 mm - Width: 900 mm - Height: 1800 mm

Category: 108 welding machines
Latest update: 07.11.2022 add to watchlist
ankerimg
item-No.: 158843852
New in: 1966
used
Seller: country-ch Christoph Sattler

Pipe welding system Fabr.: MAS, Type: MAS-RS 30 HF, Inv.Nr.: 507, YOC: 1966 best.of: Circular shears, Tube forming machine, Mechanical welding part, Calibration and welding part, Roll forming frame, Separation device, Roller table, Control cabinets, Control Fabr.: Siemens, Type: S7, Control saw.: Siemens, Type S5, max. pipe diameter: 36 mm, min. pipe diameter: 13 mm, max. machine speed: 9 - 90 m/min, max. strip thickness: 2 mm, min. strip thickness: 0.7 mm, max. welding capacity: 100 kVA, pipe diameter: 15 to 28 mm, wall thickness up to 2.8 mm, sawing capacity: max. 90 m/min

Category: 109 other metal working machines
Latest update: 03.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159368566
New in: 1990
used
Seller: country-de
Price: 9.500 €

Radial drilling machine KOVOSVIT - MAS type VO 50-1250 Machine No. 2693 Year of construction 1990 Drilling capacity (steel) 50 mm Drilling capacity (casting) 60 mm Spindle holder MK 5 Nominal projection 1250 mm Largest projection of the spindle 1125 mm (to the column) smallest projection of the spindle 230 mm (to the column) Distance spindle nose - clamping surface 630 - 1380 mm Boom Height adjustment 750 mm Pinol stroke 300 mm Clamping area 1460 x 980 mm Spindle speed 28 - 2500 rpm 16 stages Feed 0.05 - 2 mm/U 16 stages Motor power - Drilling spindle 4 kW Mains connection 380 Volt, 50 Hz. - Spindle speed over 16 gear stages - Right- Left rotation of the drilling spindle via hand lever switch - Thread cutting device up to M42 in cast iron, M30 in steel - Motorized height adjustment of the boom on precise rectangular guides - hydr. Central clamping coolant device in the machine base - Mac ...

Category: 101 boring mills and machining centers
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160281543
used
Seller: country-de Surplex GmbH
Price: used machinery auction RESALE 2.200 €

Description: jib approx. 2000 mm, serial number 150220063 weight approx.: 6,570 kg, dimensions (l x w x h) approx.: 3,300 x 1,400 x 3,100 mm

Category: 101 boring mills and machining centers
Latest update: 02.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160350755
used
Seller: country-de Innovac GmbH

Max. drilling diameter: 125mm, spindle head diameter: 110mm, clamping surface: 4085x1780mm, length: 5870mm, width: 1800mm, height: 5000mm, weight: 15.7t.

Category: 101 boring mills and machining centers
Latest update: 02.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160350789
used
Seller: country-de Innovac GmbH

Connected load: 40W.

Category: 101 boring mills and machining centers
Latest update: 02.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160350801
New in: 2007
used
Seller: country-de Innovac GmbH

Quill stroke: 310mm, table dimensions: 1470x986mm, length: 2900mm, width: 1120mm, height: 3390mm, weight: 4.55t, clamping and speed controls are defective.

Category: 101 boring mills and machining centers / Numerically Controlled Machining Centres
Latest update: 01.12.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 159814876
New in: 2005
used
Seller: country-cz AMARON s.r.o.

Inv. Num. : 6163 Type: MCV 1005 AX sprint Producer: MAS Created: 2005 Parameters: Control system: Heidenhain Work table length: 1300 mm Work table width: 670 mm Number of axles: 5 pieces Maximum table load (uniform): 1200 kg Travel X-axis: 1016 mm Travel Y-axis: 610 mm Travel Z-axis: 720 mm Equipment: Workpiece probe Tool holder Spindle repair new encoder Y-screw ball bearings

Category: 706 beverage machines
Latest update: 03.12.2022 add to watchlist
ankerimg
item-No.: 160015765
New in: 2004
used
Seller: country-it Used Bottling Lines

Used Case Packer Mas Pack 2004 Used Case Packer Model Accupack 3 6 from 2004 Packs 6 boxes of 6 bottles and 3 boxes of 12 bottles at a time Mechanical head unit movement Variable bottle gripping head for various bottle diameters Variable production speed with inverter Painted iron machine With safety features 10 formats of centerers x cartons Year of construction 2004 Production around 13 000 bottles hour Machine in perfect working condition [...for more information send your inquiry to the seller.] ***refno: INC26***

Category: 101 boring mills and machining centers
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160278276
New in: 1996
used
Seller: country-de Surplex GmbH
Price: used machinery auction RESALE 1.000 €

Description: Control: Heidenhain 410 Working Table Dimensions: 1000mm x 500mm X: 750 mm Y: 500 mm Z: 500 mm ISO40 Tool Carousel Capacity: 20 Tools Made in Czech Republic CE Certificate weight approx.: 4,000 kg, dimensions (l x w x h) approx.: 2,300 x 2,000 x 2,100 mm

Category: 101 boring mills and machining centers
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160281975
used
Seller: country-de Surplex GmbH
Price: used machinery auction RESALE 1.000 €

Description: arm length: 2200 mm drilling range: 2000 mm drilling depth: 150 mm capacity: 80 mm speed range: 11,2 - 2000 rpm motor power: 11 kW clamping area base plate: 2250 x 1100 mm clamping block: 1250 x 800 mm surface area of base: 2250 x 1100 mm, turning speed range: 11,2 - 2000 rpm, weight approx.: 14,000 kg, dimensions (l x w x h) approx.: 3,200 x 1,100 x 3,000 mm

Category: 101 boring mills and machining centers
Latest update: 27.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 160282098
used
Seller: country-de Surplex GmbH
Price: used machinery auction RESALE 1.200 €

boring diameter: 32 mm, throat: 1,000 mm, spindle taper: MK 4, clamping range of table: 1150 x 800 mm, turning speed range: 90-4500 rpm, total power requirement: 3,5 kW, weight approx.: 1,800 kg, dimensions (l x w x h) approx.: 1,700 x 1,070 x 2,610 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online