We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)
new
Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...
new
Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable ...
used
Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...
used
FMS SYSTEM: Machining Cell consisting of: Two 5-Axis machining Centres 8-Pool Pallet System(1250 x 1250mm x 3.000kg) Pallet Storage System X= 3.000 mm, Y= 2.000H/1.720V, Z= 2.000mm; A= 175°, B=0,001°; 640 Pos. ATC ; Spindle Taper HSK-A100; Spindle n= 3.000; Motor 50kW; Feeds: X,Y= 40m/min, Z= 30m/min Siemens 840D, Chip-conveyor; Serial No. 1450-03 and 1451-3, both from 2003 FR: À VENDRE MAINTENANT!!!!FMS SYSTEME ; 8 Pos. Piscine à palettes (1250 x 1250mm x3.000kg). 2x MCM Jet Five Mirror 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS, X= 3.000, Y= 2.000H/1.720V, Z= 2.000mm ; A= 175°, B=0,001° ; 640 Pos. ATC ; Cône de broche HSK-A100 ; Broche n= 3.000 ; Moteur 50kW ; Alimentation : X,Y= 40m/min, Z= 30m/minSiemens 840D, convoyeur à copeaux ; numéros de série 1450-03 et 1451-3, à partir de 2003
used
FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANT!!!!FMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ??? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C
used
Description The Mark Tecno MCM Model 3 EEN ID 0078 Status Active Location Oradea (RO) Electric Rotisserie Tecno MCM 3 EEN with a capacity of 18 Cubs, power: voltage: 14.4 kW, 400 V, dimensions (L x w x h): 1098 x 480 x 820 mm, weight: 80 kg. Missing string, otherwise it's perfectly functional. ExWorks. Price is negotiable and do not include VAT. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Watching the product schedule 24 hours prior. We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.
used
MCM Clock 600 14 pallet 500x500 CNC FANUC 16iM 15000 RPM Jfmx Supervisor centro di lavoro multipallet FMS multipallet horizontal machining center in FMS under power in our warehouse Mimu machine tools (Italy)
used
x-travel: 2600 mm y-travel: 1600 mm z-travel: 1700 mm Control: Fanuc 16 MB total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 42 x 18 m The system requires a space of approx. 42 x 18 m It is designed for fully automatic operation in 3 shifts. Components with tolerances of
used
x-travel: 700 mm y-travel: 715 mm z-travel: 850 mm Control: FANUC 16i-MB table-size: 500 x 500 mm table weight: 500 Kg a-axis: +45 / -135 ° c-axis: 360 ° distance table / middle of spindle: - mm number of spindle speeds: 10000 U/min/rpm tool taper: ISO 40 spindle drive: 18,5 / 22 kW rapid travel x/y/z: 70 m/min Tools changer: - pos. dimension of workpiece: dia 725 mm total power requirement: - kVA weight of the machine ca.: 21 t dimensions of the machine ca.: m The machines of the Clock series can also be used as 5-axis multitasking machines. The Clock series is characterized by high speed and precision. paired with a very stable machine concept. Thanks to the fast tool change and pallet exchange, the machines achieve a very high productivity. As 5-axis version the Clock 700 is equipped with a very stable Swivel table equipped. The swivel table is double on the axes and thus guarantees ...
used
x-travel: 700 mm y-travel: 715 mm z-travel: 850 mm table-size: 500 x 500 mm tool taper: ISO 40 Control: Fanuc 16i-MB total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 2 Number of axis total: 5 Longitudinal travel (X-axis): 750 mm Transversal travel (y-axis): 860 mm Vertical travel (z axis): 850 mm Table divisions (B): 0.001 ° Pallets: number: 12 Length: 630 mm Width: 630 mm Tool changer: Tool magazine number of tools: 334 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 11000 rpm Feeds: X axis: 32 m/min Y axis: 32 m/min Z axis: 32 m/min Spindle motor: 25 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 0 Technical data Number of axis total: 5 Longitudinal travel (X-axis): 3000 mm Transversal travel (y-axis): 2000 mm Vertical travel (z axis): 2000 mm vertical travel (Y-axis): 1720 mm Table divisions (B): 0.001 ° Swivel angle (a-axis): 175 ° Pallets: number: 8 Length: 1250 mm Width: 1250 mm Transport weight: 3000 kg Tool changer: Tool magazine number of tools: 640 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 3000 rpm Feeds: X axis: 40 m/min Y axis: 40 m/min Z axis: 30 m/min Spindle motor: 50 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor
used
5-Axis Horizontal Machining Centre MCM Tank 1300 5-AXIS New in 2017 Siemens 840D solution line Twin pallets 630 x 800 mm Work weight max. 1500 kg NC rotary table - 4th axis B-Axis 360° / 0.001° NC-Tilting head 5th axis A-Axis +80°/-95° / 0.001° X 1300 mm Y 1400 mm Z 1400 mm Feeds and rapids to 50000 mm/min. Spindle drive 40/52 KW Spindle speeds to 10000 rpm Tool taper ISO 50 199 tool ATC Linear scales for higher accuracies Renishaw sample Chip conveyor CTS 65 bar Beautiful machine – excellent condition Operating hours 11544 - 05/2020) Spindle Working hours 6784 (05/2021) Inspect under power Proposal Number MH-6155
used
CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control type Fanuc 16 I X Axis Stroke 700 mm Y Axis Stroke 700 mm Z Axis Stroke 800 mm Axis B 3660000 Nr. pallets 4 Rotational speed 20,000 rpm High pressure 65 Bar Spindle connection HSK 63 Table dimensions 630 x 630 mm Tool magazine 72 positions Chip Evacuator Accessories
used
MCM Clock 600 MP14 FMS consisting of 2 machines CNC FANUC 16i-M, 14 pallets 500mm x 500mm Spindle 15000RPM full 4th axis (360.000 pos) Tool Changer: 200 pos. X=600mm, Y=600mm, Z=700mm JFMX supervisor 2001 Under power in our warehouse in Gussago Mimu Machine Tools (Italy), X: 600, Pallets: 14, Pallet size: 500x500, Spindle: 15000 rpm
used
height of tips 400 length 7 m passage bar 105 YEAR 2001
used
two flow pack machines can be used for packing ice cream, chocolates, bars, sweets, etc.
used
X-travel: 2600mm, y-travel: 1600mm, z-travel: 1700mm, max. load: 4t, number of tool slots: 599, max. rotational speed: 8000/min, dimensions: 44,490x16,460mm, with automatic pallet system, buffer shelve, production host computer and other elements.
used
Shell end mills, shell mills, milling cutters -Outer diameter: 100 mm -Inner diameter: 40 mm -Teeth: 10 -Price: complete -Number: 3 pieces -Weight: 4 kg
used
Horizontal machining center FANUC 160 MC control Pallet size 630 X 630 Number of pallets 10 X-axis travel 1200 Y-axis travel 850 Z-axis travel 800 Maximum equipment diameter 1000 mm, maximum height 1080 mm B-axis continuous Tool attachment ISO 50 DIN 69871 B Number RPM 8000 Number of tools 230 Accessories: High pressure tank Tool integrity check Continuous 4 axis table Manuals and CE certificate MARPOSS header
used
Used production cell MCM CLOCK 1000 FMC N ° 1 machining centers - 4 axes, 16 pallets of 630x630 STROKES: X = 940 mm - Y = 700 mm (from +90 p.t.) - Z = 800mm Shuttle for feeding and storing 18 pallet places on two floors N ° 1 place for loading / unloading pieces with video terminal 148 ISO 50 tools with BALLUF Coding High pressure system through the variable 65 bar tool Scraping chip conveyor Marposs probe for dimensional checks, zero piece etc. Tool integrity check by laser CNC FANUC 16M JFMX 2.0 LINE SUPERVISOR (2017 update) 360 divisions rotating table (indexed) Spindle: 8,000 rpm, variable preload, 25 Kw, (S1) Optical lines pressurized on all axes Year of construction 1997 MANUALS and diagrams
used
Used MCM CLOCK 600 Machining center - palletized Currently still in production. MCM CLOCK 600 NC FANUC 16i-M Spindle speed 20,000 rpm 15/28 KW Cooling inside the spindle no. 2 rotary tables 500 x 500 mm Rapid speed 50 m/min X axis 600 Y axis 600 Z axis 700 B axis 360,000 P. Tool warehouse 40 places hsk 63 Year 2001
used
Machine description: Longitudinal travel X = mm. 10.000 Vertical stroke Y = mm. 2.000 Cross travel Z = mm. 600 Relocation additional for W axis 600 mm. (continuous) Power supply voltage and frequency: 400 V. - 50 Hz. 1) Vertical tool magazine with 600 places HSKA63 - DIN 69893. 2) Device for washing the tool cone operated by high pressure coolant. 3) Tilting head unit - 90 ° A Axis tilting cradle - C Axis positions n. 360,000 4) 4-sided drum with a side of 1100 mm., - Spindle speed: 20,000 rpm. HSK 63A; - Spindle bearings a variable preload; - Equipment for automatic tool balancing control; 5) Ecological-accident prevention protection of the armored type machine for high speed machining; 6) Refrigerating unit for conditioning the spindle cartridge; 7) Spindle with provision for the supply of coolant through the center of the tool; 8) Air-conditioned electrical unit; 9) Scrap ...
used
MCM Jetfive Drum Milling Machine :::SPECIFICATIONS::: CNC Model: Fanuc - CNC Version: 16i - M - Head Type: Fourth and Fifth Axis Automatic Head Additional technical notes for the head: Continuously controlled head on both axes - Tool holder: HSK 63 Spindle power: 55Kw Spindle speed: 20000 Number of tools: 760 X axis stroke: 10000mm Y-axis stroke: 2000mm Z-axis stroke: 600+800mm Rapid feeds for linear axes X Y Z: 50m/min Pallet changer: yes Pallet size: 1100 x 10000mm Maximum load allowed: 2000Kg Round pallet: yes High refrigerant pressure: yes Pressure value: 65bar External tank system with filter: yes Cutter type: mobile column Chip conveyor: belt conveyor Presetting: yes Other technical data: Spindle torque 156 Nm Drum table with 4 faces rotating on a horizontal axis Machine equipment: Automatic tool check Workspace Came ...