used MAHO HANSEN Die Sinking Spark Erosion Machine Tools

Description: Serial number: 60318 Technical data (without guarantee): Table size X x Y: 600 x 400 mm Color path X x Y: 350 x 250 mm Z: 340 mm Workpiece height: max. 240 mm Table quill: max. 520 mm Generator: 20 - 120 A With accessories including EROWA electrode holders (approx. 28 pieces) as shown in the pictures and technical documentation as shown in the pictures weight approx.: 3,900 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,700 x 2,100 mm

EDM machine - X: 500 mm - Y: 295 mm - Z: 385 mm - C-axis: 360° - Clamping area: 780 x 500 mm - Spacing table - Pinole: 285 - 660 mm - Workpiece weight: 1200 kg - max travel speed X,Y,Z: 600 mm/min - Clamping system: EROWA - C-axis measurement resolution: 0.001° - Electrode changer: 16 -fold - Electrode changer: pick-up - Electrode weight: C-axis 20 kg - max. single electrode weight: 5 kg - Electrode changer total load: 40 kg - Dielectric cooler - Dielectric filter candles: 3 pieces - Dielectric filling height: 345 mm - Dielectric capacity: 450 l - Dielectric aggregate: separate - Generator: 30 A A - Control: EROCOM 200 - Fire extinguishing system - Total power: 8 kW - Machine weight: 4400 kg - Space requirement (W x D x H): 2.2 x 3.3 x 2.4 m - Condition: very good Details tested by Maho technicians, ready for demonstration under electricity, instru ...

Key data: 730 mm, 630 mm, 12 A

Made in Germany X-axis 525 mm Y-axis 400 mm Z-axis 375 mm Dielectric tank 400 L Machine dimension; W 2100 x D 2450 x H 2600 mm Weight: 4800 KG Work table: L 730 x W 630 mm Operating voltage 400 V - 50 Hz Current consumption 12 A Control voltage 230 AC/ 24 DC Back-up fuse: 25 A Moto software is missing Price basis: free loading

Mains voltage: 380V, connected load: 13kW, controls: Heidenhain TNC 125, the machine is in very good condition.

X-travel: 300mm, y-travel: 150mm, z-travel: 200mm, table dimensions: 350x450mm, controls: EROPULS 2002, length: 1200mm, width: 1200mm, height: 2000mm, weight: 1.4t, including documentation, without magnet clamping plate.

new, unused Right Angle Shaft Double Stage Reduction Horizontal rotating NE23BRN4 N (reducer with series N compact housing solid shaft) E (Size E) 2 (Double Stage Reduction) 3 (with right angle horizontal shafts) BRN (indicates the assembly arrangement shaft arrangement) 4 (nominal ratio) 71 kW n1 750 u/min n2 187,5 u/min

Gearboxes, spur gear units used HANSEN Type: RLF41-BNVH-12 Translation i: 111 Shafts approx. Ø 45 / 165 mm Dimensions: approx. 1200 x 750 x 670 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Gearboxes, spur gear units used HANSEN Type: D753CT Translation i: 453 Shafts approx. Ø 38 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Gearboxes, spur gear units used HANSEN Type: D743CT3 Translation i: 203 Shafts approx. Ø 50 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg

Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used

Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used

x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm table surface area: 1250 x 700 mm spindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/min quill stroke: 100 mm semi-automatic operated: Phillips 432 Number of working hours: 62.340 h main drive motor: 22 kW total power requirement: 27 KVA weight of the machine ca.: 7,7 t base area: 3,8 x 4,1 x 2,4 mm accessories:: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Divider as 4th axis with housing of the working area The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm size of pallet: 630 x 500 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 1 - 4000 mm/min rapid travel x/y/z: 10 / 8 / 10 m/min control: PHILIPS CNC 432 spindle motor: 15 kW total power requirement: kW weight of the machine ca.: 6,0 t dimensions of machine: 4,10 x 2,17 x 2,55 m acc.: hydr. swivelling head with hydr. tool clamping, chip conveyor, coolant, entire protection cabin with pallet changer (two pallets) and 60-pos. tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mm y-travel: 1000 mm z-travel: 1000 mm taper ISO: 50 Table dimensions: 650 x 1000 mm spindle speeds: 32-1600 voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 500 mm z-travel: 650 mm tool taper: SK 40 quill stroke: 100 mm turning speed range - power take off spindle: 40-2000 U/min Feed: 5-2000 mm/min Rapid movement: 4000 mm/min Control: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10164 Manufacturer: DECKEL MAHO Year of construction: 1986 Type of control: CNC Control: CNC 432 Storage location: Halberstadt Country of origin: Deutschland Total connected load: 40 kVA X-Travel: 800 mm Y-Travel: 450 mm Z-Travel: 500 mm Feed force (X, Y, Z): X 800, Y 24000, Z 8000 N Quill Stroke: 100 mm Speed work spindle: 20-4000 RPM Feeds X/Y/Z: 1-3000 m / min Rapid Traverse X/Y/Z: 8 m / min Tool Taper: ISO 40 Space requirements: 3680 x 3780 x 2720 LxWxH (mm) Further information: Additional information: - with controlled rotary table Ø800 (B axis) - simultaneously controlled axes: 3 - axes controlled one after the other: 4

We offer for sale a 4-axis CNC milling machine MAHO MH-C 800, including a rich set of tools, jigs, fixtures and accessories (solid vices, fixtures, etc.), including two new sheet metal workshop cabinets. The spindle is mounted both horizontally (horizontal) and at the same time the original vertical head is installed on the machine. The machine has a system for cooling the workpiece with cutting fluid (the photos do not show the gutter part around the table for fluid drainage, but it is included in the price). The machine is in 100% condition. In 2018, a renowned company performed a complete GO. Since then, the machine has worked only about 300 operating hours on light tasks. The machine has COMPLETELY COMPLETE documentation, namely: Electrical connection of the machine Mechanics Hydraulics Control system documentation Programming documentation etc. Machine parameters:  ...

Dimensions: Length - ~ 2.3 m Width - ~ 1.5 m Height - ~ 1.8m Weight - 2500 kg Spindle motor - 4.0kW Hydraulic pump motor - 0.25kW Coolant pump motor - 0.15kW Supply voltage 400V 50Hz 24V DC control voltage X / Y / Z axis motors - direct current INDRAMAT Table - 800 / 400mm Control: PLC Siemens S7-1200 + HMI 7 + Measurement with a ruler (0.005 mm) Automatic and manual mode (Automatic mode has 25 lines) Simple service and diagnostic page Electric spindle speed adjustment - stepwise Central lubrication HMI Menu: Polish / English / German

travel: x-axis:1.200 mm y-axis.:..600 mm z-axis.:...600 mm NC- table for NC-axis:1.000 x 820 mm tool tape:.ISO 40 spindle motor power:5 kW spindle speed..:20-6.300 rpm max. workpiece weight.:1.000 kg tool changer:36 spindle power:15kW machine weight:11,5 ton CNC- controll.:PHILIPS 432 new in..:1993 incl. chip conveyor incl. electr. Hand wheel Milling head can be tilted in verical and horizontal position condition : very good

Table dimensions: . mm Motor output: . kW Spindle diameter: . mm reus: . U/min Weight: . kg Year: . fabric-no.: 42965 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 500 mm z-travel: 450 mm table surface area: 900 x 500 mm spindle stroke: 100 mm tool taper: ISO 40 turning speed range: 20 - 3150 U/min feeds - cross: 1 - 3000 mm/min feeds - longitudinal: 1 - 3000 mm/min feed power in the axis x + z: 8.000 N feed power in the axis y: 24.000 N rapid traverse in the axis x + y: 6 m/min rapid traverse in axis z: 11,4 m/min total power requirement: 40 kVA weight of the machine ca.: 3,3 t dimensions of the machine ca.: 3,8 x 3,6 x 2,2 m electrics - voltage/frequency: 380 / 50 V/Hz CNC Control: Maho CNC 432 Continous Path Control Philips CNC 432 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel Maho Deckel Maho DMC 103 milling machine DMC 103

Description: With HEIDENHAIN TNC 121 path control, linear path control, spindle speed range 0 to 2000 rpm, feed speeds 0.02 to 0.2 mm, with rotary swivel table, see photos for details weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,800 x 2,300 mm