used MACO Combination Machines

Automatic capsule filler Romaco Macofar model MT80 for a produccion up to 80.000 capsule per hour . The machine include format n°2 for pellets

Maco BT 250A band saw, never used, in good condition.

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 640 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 150 mm Table load max.: 25 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 385 mm B axis swivelling range: -110 / +30 ° Table speeds: stepless up to: 4000 rpm Holding torque of the table: 400 Nm Tool changer: Number of tools: 96 Tool diameter max.: 50 mm Tool lenght: 130 mm Max. tool-weight: 1 kg Time of tool changing: 0.8 sec Average chip-to-chip time: 3 sec Spindle nose: HSK: E40 Spindle speeds: stepless up to: 42000 rpm Rapid traverse:: 60 m/min Acceleration: 10 m/s Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 10 / 15 kW Torque max.: 8 / 12 Nm Machine´s w ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: NUM 1060 Technical data Number of axis total: 5 Number of spindles: 11 Longitudinal travel (X-axis): 740 mm Transversal travel (y-axis): 185 mm Vertical travel (z axis): 220 mm Swivel angle (a-axis): 110 ° C axis: 360 ° Spindle positioning increment: 0.001 ° Bar diameter: 32 mm Spindle nose: ISO: 25 Spindle speeds:: (11x) stepless from: 50 rpm up to: 12000 rpm Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 20 m/min Rapid traverse: vertical: 20 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Machine´s weight about: 3500 kg Overall dimensions machine: Length: 2215 mm Width: 2500 mm Height: 2650 mm Various accessories: Set of toolholders (without tools) Set of collets

Combination laser punching FINN POWER LB6 Year 2003 3000x1500

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 410mm 4 knife shaft reversible knife (no more adjustment) Dressing table length of 1800mm Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Engine 4.0 KW (5.5 hp)S1 100% Planing knife 410 HSS G&WJ-BA-410-HSS

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 320mm 3 Knife shaft reversible knife (no more adjustment) Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation WJ-500200 SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Planing knife 320 HSS G&WJ-BA-410-HSS

dimensions: length 643 mm width 410 mm weight 14,5 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery: two pipe-screens, flap valves and tees piped, with cans 0,25 mm, 2x connection parts with slotted nut DN25 ; new machine - top condition

Built in 1997 Size max 660 x 1.020 mm Equipment feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife o polyurethane-steel folding rollers delivery: o belt delivery ; working condition

Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: o continuous feeder o counter 1st folding unit: o 4 buckle plates o polyurethane-steel folding rollers o noise prevention 2nd folding unit: o cross-fold knife o buckle after cross-fold left o polyurethane-steel folding rollers 3rd folding unit: o third-fold knife delivery: o belt delivery; working condition

Combination of suction Sweeper and wet scrubbing machine with 4 cyl. Kubota diesel engine, infinitely variable hydrostatic travel drive, automatic functions. Max working width 1270 mm, high emptying. Solid technology from a brand manufacturer, ideal for indoor and outdoor areas! 2 x available: Year 2006 / 220 h and year 2005 / 1020 h More Sweepers on stock - information, photos and special offers on request!

Nozzle tube system(s) three-dimensional Basket diameter 600 mm Basket load 100 kg Usable internal height 370 mm incl. accessories for CE certification: - Direct drive for the washing basket - Weekly timer - Water deficiency protection - Chip/particulate filter with bath cover plate - Vapour extraction Automatic level replenishment: - automatic level supplementation Function blowing off / drying: Pulse compressed air blow-off three-dimensionally Lye care: Disc oil skimmer – discontinuous oil discharge – For floating/demulsifying oils Bag filter system type Sʺ With 2 pieces of pressure gauge on the bag filter housing ʺAfterʺ Filtration Emptying and cleaning the system (occupational health and safety): Pumping device/flushing of the tank bottom Hose/nozzle in aluminium/plastic Option – AM execution: AM version for additional manual cleaning (high ...

For tools with cylindrical shank (for KHE 32) Chuck span : 1 - 13 mm

Technical details on demand.

Max. weighing range: 600g, connected load: 1000VA, weight: 380kg, with documentation.

Sale of Moog RKP 80 + Voith internal gear pump. Exact type of lashing pumps: Moog 2518218727 + Voith IPC / 5/50. The Moog pump has 80 cm3 and the Voith pump 50 cm3. The pumps run approx. They've spent 3,000 hours on pure oil, so they're new.

Sell a new pair of hydraulic pumps, Moog RKP 63 + Moog RKP 45 pumps. Exact type of connected pumps: Moog HP-R18B1-RKP063 + Moog HP-R18B1-RKP045. The pumps also include electrohydrautic controls. The pumps are new, not yet mounted.

Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.

Large linear combination weigher, 13 5.0 liter weighing heads, for various kinds of big volume products: fruits, vegetables (potatoes, carrots, tomatos, oranges, mango, etc.). Also suitable for frozen food, such as fish or meat. - Specifications: weighing range: 200g-5kg | max. speed of the machine in neutral: 80 cycles/minute. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Very large weigher specifically for fresh/humid fruits, meat, vegetable etc. - Weighing unit with 8 linearly arranged weighing heads, memory hopper for a higher accuracy and speed , spiral conveyor supply. Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: stainless steel | protection class IP65 | max. speed of the machine in neutral: 45 cycles/minute | weighing range 10-2500g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All  ...

Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 45 cycles/minute | accuracy: +/- 0.1-3.0g | hopper volume: max. 1l | weighing range: 10-2000g | power: 220V, 1.5kW | stainless steel | IP64 | machine dimensions and weight: L2320xW840xH1820mm, 350kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In additio ...

Multi-head weigher specifically for fresh/humid fruits, sliced or pulled meat, vegetable etc. Weighing unit with 8 linearly arranged weighing heads and 8 memory hopper for a higher accuracy and speed , spiral conveyor supply. - Suitable for the filling into bags, skins, cans, jars etc., easy to clean. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | accuracy: +/- 0.5-2.5g | hopper volume: max. 0.5l | weighing range: 20-500g | power: 220V-240V, 1.5-2.0kW | stainless steel | IP54, weighing heads and memory hopper are made of polypropylene | machine dimensions and weight: L1294xW789xH1100mm, 320kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 d ...

Converter module, Lightbus combination input / output module -Type: M2400.041 -digital inputs: 8 -digital outputs: 8 -Number: 1x available -Price: per piece -Dimensions: 270/75/H70 mm -Weight: 1.2 kg

Diode combination HARMUTH ELEKTRONIK 400009 400705 spare part for machining center HECKERT CWK400 D ! used ! Dimensions: 78 x 45 x 52 mm

Resistor combination HARMUTH ELEKTRONIK 100122 400083 17x 10 kΩ 1 % spare part for machining center HECKERT CWK400 D ! used ! Dimensions: 75 x 50 x 52 mm