used LOIRE Sheet Metal Bending Machines

Die Spotting press LOIRE SAFE ESSM 200/25, max capacity 2000 Kn, Table 2500x1500 mm, Information about technical data are not binding., Machine available subject to prior sale, Maximum force, adjustable: 200 - 2000 Kn, Maximum daylight between lower table and ram: 2000 mm, Ram stroke: 1600 mm, RAM dimension: 2500x1500 mm, Maximum load in the ram: 9.000 kg, Upper ram plate tilting: 110°, Lower table dimension: 2500x1500 mm, Maximum load in the lower table: 18.000 kg, Front moving plate stroke: 1500 mm, RAM speed approach: 2 - 8 mm/s, RAM speed working: 40 mm/s, Electrical power main group: 15 Kw

Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s

Table dimensions ( x-y/mm) 2500 X 1500 Stroke (mm) 1600 Motor Power (kw) 15 Weight ( ton) 32 Location Turin Italy Ce Marked Year of made 2001 Distance between uprights 2600 mm Max distance between table and ram 2000 - min. 400 mm Front moving plate - Upper ram plate tilting 110° Number of cylinders 2 - Maximum load in the lower table 18000 Kg - Maximum weight on the upper slide/ram 9000 Kg - Approach/return speed 40 mm/s - Working speed 2÷8 mm/s

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   openings in uprights: yes PRESS FORCES   total force (nominal): 350 to PRESS TABLE   table surface (left-right): 1600 mm   table surface (front-back): 1400 mm SLIDE   stroke: 1200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 250 mm/s   working velocity min.: 14 mm/s   working velocity max.: 50 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 1250 mm   distance between columns (H-frame): 1650 mm   passline opening (free passage in side columns): 630 mm DIMENSIONS / WEIGHTS   height above floor level: 4300 mm   height under floor level: 1000 mm   total weight approx.: 24000 kg ATTACHMENTS (PRESSES)   European CE standards: yes

PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES   total force (nominal): 650 to PRESS TABLE   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm SLIDE   slide force: 630 to   table surface (left-right): 3000 mm   table surface (front-back): 1800 mm   stroke: 1000 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 7 mm/s   working velocity max.: 15 mm/s   return velocity max.: 120 mm/s   return force: 65 to DIE CUSHION (TABLE CUSHION)   cushion force: 250 to   stroke: 400 mm   cushion plate surface (left-right): 2500 m ...

Three-roll sheet bending machine, used three-rollers -plate -bending m/c, used Type: UBBD 2.5 x 2000 Manufacturer / make: WMW Built/ new: 1970 Working range: sheet width max. / max. working length: 2000 mm Sheet thickness range / sheet thickn.: max. 2.7 mm Bending rollers / bending rollers: top: 1 piece , bottom: 2 pieces Driven / driven: 2 sub-rollers/ bottom rollers Upper roller diameter / diameter of top roller: 112 mm Bending speed. / speed bending: 7m /min Minimum bending radius / min. bending radius: 130 mm Weight / weight: 700 kg Connection value / loaded power: 4 kW

Salvagnini P4 Year of manuf. 2007 Configuration: HPT201516 MZR Machine consists of: 1. Automatic plates feeder 2. Automatic bending unit 3. Automatic bend products receiver Max sheet thickness: mild steel 410 N/mm2: min. 0,5mm - max 2mm stainless steel 600 N/m2: min. 0,5mm - max 1,25mm aluminium 265 N/mm2: min. 0,5mm - max. 3mm Min and maximum dimensions of sheet material: L min./max.: 405 / 2000 mm W min./max.: 190 / 1524 mm max diameter 2150 mm centring dim. 2000mm Machine including bending tools

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

Projection: 880 mm Wheels: Ø 60 x 160 mm Toproll adjustment: 300 mm Machine LxWxH: 1300 x 700 x 1800 mm Machine weight: 300 kg

Working length: 2050 mm Round bending: 5 mm Bending: 4 mm Top roller: Ø 150 mm Under-roll: Ø 225 mm Equipped with: - Profile iron bending device - Sentences Profielrollen -Operating instructions Motor power: 3 kW Machine LxWxH: 3300 x 1050 x 700 mm Machine weight: 2000 kg

Ref.nr. 00766 Description of the plant Used press brake Manufacturer: Hämmerle M+S Brugg AG Model AP 100 – 2100 Year of construction: 1991 Max. pressing force 1000KN Max working length 2100mm Max. stroke 400mm Projection 300mm Mass Weight 11500kg Operating voltage 380V 50Hz Control voltage 24V Total connection 23 KW Nominal current of the back-up fuse 63 A

Key data: 3550 mm

Ref.-No.00804 Description Hydraulic Press Brake Tools included Manufacturer: EHT Type EHT VarioPress 320 Year of construction 1997 1997 Pressure infinitely adjustable: 3200 kN 320 tons max. working width: 3550 mm 3550mm Working width between uprights: 3050 mm Stand projection: 350 mm Table height: 900 mm Plunger stroke: 270 mm Plunger bevel adjustment: 15 mm With crowning device and quick-clamping device for upper tools Lifting speed: empty 100 mm/s, under load: 10 mm/s, retraction: 100 mm/s Control: DNC 80 PC ( DNC 84 PS= 4 axes

Key data: 3100 mm, 2 mm, 10 mm

Swivel bending machine Cidan Type: K25-30 YOC 2018 Top Condition At call The CIDAN K25-30 is a quick and easy-to-use bending bench consisting of a robust, fully welded steel construction with cast iron side frames. The K25 is designed for continuous operation under the most demanding conditions. With its dual drive, this machine covers a wide range of different applications in the manufacturing industry. Folding Length: 122" (3100mm) Folding Capacity Steel: 2.00 Folding capacity stainless steel: 1.20 Folding Capacity Aluminum: 3.00 Opening height – tension beam: 135 mm Motor – tension beam: 1.5 kW Motor – folding beam: 1.5 kW Dimensions: 4190 mm x 1600 mm x 1700 mm Weight: 3.685 kg The machine can be viewed and tested at any time.

Key data: 3048 mm

Ref.Nr. 00810 Name of the plant Bending Center Manufacturer: Salvagnini Model P4 2525 Year of construction 2006 Description according to order confirmation at the time of purchase Scissor table Feeder destacker Bending center Programmable hold-down device Upper bending beam Lower bending tray Control unit Control for auxiliary bending cheeks CLA tool kit Swivel device for auxiliary tools Option for cutting and spreading profiles Dispensing device / buffer for panels Water-air cooling unit Scissor table Maximum dimensions of stackable PCBs 3048x1524mm Maximum height of stackable package incl. pallet 350 mm Usable load capacity 5000 kg Vertical lifting distance 550mm RVA - Feeder-Destacker Max. dimensions of metal sheet 3048x1524mm

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Swivel bending machine, rotary bending machine, sheet metal bending machine.

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

sheet width: 3000 mm plate thickness: 40 mm pre-bending: 30 total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: 8,4 x 2,6 x 3,7 m Machine in good condition. PREBENDING DOUBLE . Maximum bending length 3.000 mm . Bending capacity 40 mm . Prebending capacity 30 mm . Top roll diameter 590 mm . Bending rolls diameter 490 mm . Main motor 45 kW . Bending motor 30 kW . Digital readout in all axis . Approximate weight 45 t . Approximate dimenssion.: . Length: 8.400 mm . Width: 2.600 mm . Height: 3.700 mm . Trench height: 1.780 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 1 mm roll diameter: 56 mm dimensions of the machine ca.: 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 40 mm pre-bending: 35 mn number of rolls: 4 Walzen diameter of upper rolls: 550 mm roll diam. bottom roll: 480 mm speed: 1 - 4 m/min total power requirement: 66,0 kW weight of the machine ca.: 47,3 t dimensions of the machine ca.: 6,8 x 2,95 x 3,05 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 10 mm pre-bending: 8 mn number of rolls: 4 Walzen diameter of upper rolls: 210 mm roll diam. bottom roll: 190 mm speed: 5 m/min total power requirement: 9,0 kW weight of the machine ca.: 5,45 t dimensions of the machine ca.: 4,05 x 1,47 x 1,55 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.