used KUPFERMÜHLE Planers

Planing shaft for DOMA 860

-Knife shaft for DOMA 2050 below -Knife shaft for DOMA above -new state

workshop overhauled

The unit is suitable for Rvt2mdtrb for sawing or scribbled. Drive with electric motor and V-belt Condition good (used)

ready for use m used Pre-dressing table for copper mill planing machines Total length 2600 mm Planing width 240 mm

Saege bushins in various lashings in stock Copper mill DK 14 Copper mill DK 16 Copper mill DK 17

-Feed roller below -and above in toothed guide for KUPFERMUEHLE

Planing shaft DOMA 2300 bottom and top Knife shaft DOMA 2300 Right and Limks

-Knife shaft Z4 -in chrome-plated finish -D 200 mm -for machine K133 Condition good, used

Planer-saw combination copper mill DK-14 Year of construction 1982 Working width 605 mm Working height 200 mm Number of spindles 3 Shaft arrangement Hobewelle bottom+top / Saw shaft bottom Spindle speed 6000 rpm Motor power 5.5 - 7.5 - 30 kW Feed speeds 7 - 23 m/min Feed motor 2.2 / 3 kW Driven rollers in table 3 Feed rollers top 4 Yt9k30 Transport rollers in extract 2 Tool head horizontal dia. 126mm, L=610mm Chip removal below 12 mm Chip removal top 20 mm Suction nozzle diameter 140-140-120 mm Weight 3500 kg Space requirement 1500 x 1900 x 1500 mm Voltage / Frequency 380V 50Hz 3Ph Cutting height saw max.: 50mm Saw blade diameter max.: 250mm

Planer and multi-leaf saw, ideal for batten production. 2 planing shafts above and below with 5 knives per shaft. Planing height 200 mm Planing width 600 mm. Engines: Bottom 18.5 KW. Above 18.5 KW. Electric table adjustment. Feed up to 23 m /min. Attached multi-leaf saw Raimann DK 14. Cutting width 407 mm. Cutting height 50 mm. Motor 37 KW. Setback fuses and fluted feed rollers with pressure. Feed unit on the inlet side.

Four-sided planer copper mill Type: Vuin 605 Planing width 605 mm Planing thickness 3 – 200 mm in the horizontal area Planing thickness at the rear in the vertical area 80 mm Upper and lower planer shafts as 4-knife shafts 4 planer shafts 1. Bottom 5.5 kW 2. Top 7.5 kW 3. Left 4 kW 4. Right 4 kW Shortest piece length, self-continuing: 350 mm Electrically height-adjustable table Width adjustment for the rear planer heads manually via crank 2 feed speeds Suction nozzle diameter 3x120mm, 1x150mm Weight approx. 2700 kg Space requirement L 2350 x W 1400 x H 1800 mm Control cabinet 1200 mm x 420 mm x H 1050 mm

Key data: 600 mm, 200 mm

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Double-sided planer copper mill DOIN- VUIN 605 year of construction 1975 S/N 3310 Manufacturer Kupfermühle woodworking machines Working width / maximum width 600 mm Working thickness: 200 mm chip removal max 20mm ( upper shaft ) chip removal 12mm ( under shaft ) Shortest piece length 350mm Technical equipment: from above: toothed draw shaft Toothed Pull Shaft 2 PCs 4-blade planner shaft, 605 mm, 15 kW from below: Table top, adjustable Traction shaft, smooth-running, adjustable 4-blade planner shaft, 600 mm, 11 kW 2 adjustable tables/pull roller in the lower table top Electric height adjustment Lift motor a ...

High-performance planing system Kupfermühle type K43 with inlet and outlet for planing and beveling boards and beams. Consists of: 1. Semi-automatic inlet roller conveyor, length: 10 m 2. Kupfermühle HOMS 410 planing machine 3. Outlet roller conveyor, length: 10.5 m with pneumatic ejector, Working height four-sided: 250 mm, Working height two-sided: 280 mm, Feed planer: max. 30m/min, spindles: 4 + 2 x bevel, 1. Infeed roller conveyor, length: 10 m, working width: 420 mm

Hydraulic Single Planing Machine Fabr. WALDRICH COBURG Type 2E 1515Com. -No: 2110108 built in 1966combined gantry and milling machine with removable milling attachmentPlaner length: 2000 mmPlaning width: 900 mmPlaning height: 750 mmTable surface: 2000 x 650 mmpermissible workpiece weight: 1550 kgmilling head11 spindle speeds: 112 - 1120 rpmPower: 1.5 kWSpeed: 960 rpm.Tool holder: MK 3Max. Cutter diameter: 63 mmAxial adjustment of the milling head: 130 mmVertical adjustment: 170 mmAdjustment of the milling head on the boom: 630 mmtable driveMotor power of the feed pump: 3 kWFeed rates stepless Flow: 10 - 4200 mm / minReturn: 10 - 2800 mm / minCreep speed: 5 mm / minLongitudinal adjustment: 2000 mmWith- milling attachment- Sanding attachment- Planing steel holder- swiveling control panel- rapid traverse- mot. transom height adjustment- Separate control cabinet- hydr. speed adjustmentused,  ...

Planers/Mills Manufacturer: Tennant Type: K4 Petrol engine Accessories: 2 extra rolls, 1 x new battery Caution: The motor starts but not continues. Probably is located on carburettor. All information without guarantee

Upon purchase, full maintenance of the machine is carried out

Space requirement: 11300 * 3950 * 2800 mm Object table: 5000 mm Sled movement: 2350 mm Permeability between columns: 1260 mm Machine weight: approx. 20t

Klopp 375 Speed Plane / Short Plane from vocational school, as good as new original condition Vvmbx3 Plane length: approx. 375 mm Planing width: approx. 500 mm Table size: approx. 350x320 mm Lifting speed: approx. 19 - 190mm/stroke Max. distance table - joints approx. 390 mm EMERGENCY STOP.

Description: Max. machinable height 120 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Operator shafts number 5 Min. machinable height 6 mm Maximum machinable height 120 mm Min. machinable length 620 mm Min. machinable width 25 mm Maximum machinable width 230 mm Lined sliding table yes Max. forward feed speed 25 m/min Forward feed wheels yes Operator units 5 OPERATOR UNITS 1 Cutting shaft : bottom shaft diameter : 40 mm shaft length : 250 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 2 Cutting shaft : Right shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm Motor power : 7.5 KW OPERATOR UNITS 3 Cutting shaft : left shaft diameter : 40 mm shaft length : 195 mm max. tool diameter : 200 mm with positioning from NC : yes Motor power : 11 KW OPERATOR UNITS 4 Cutting shaft : top shaft diameter : 40 mm shaft ...

Description: Consisting of approx. 10 pieces Approx. Onsite Dimension. (l x w x h): 500 x 400 x 150 mm, weight approx.: 30 kg

Description: Consisting of approx. 12 pieces Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm, weight approx.: 40 kg

Description: Consisting of 10 pieces Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm, weight approx.: 40 kg

Description: Consisting of 5 pieces Approx. Onsite Dimension. (l x w x h): 650 x 420 x 150 mm, weight approx.: 50 kg

Description: Consisting of 7 pieces Approx. Onsite Dimension. (l x w x h): 650 x 420 x 150 mm, weight approx.: 50 kg