We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.
used
10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system
used
PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.
used
Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures
used
Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained. Technical details Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm Weight: 15 t Operating hours: 44.736 Bottles Volume: 200 ml - 2000 ml Max. Diameter: 115 mm Max. Length: 350 mm Preforms Length: 60 - 200 mm Max. Support ring diameter: 35 mm Scope of delivery Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)
used
Overview The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l) Formats: 500ml, 750ml, 1.000ml, 1.500ml PCO 1881 Operating voltage: 400V/ 50 Hz Control voltage: 24 VDC Scope of delivery Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008 Preform feeder | Transver AG | - | 2008 Silo Elevator Sorting Chute
used
W 82 | BLOW MOULDING KRUPP CORPOPLAST YEAR: 2000 SPEED: 24.000 BPH MODEL: BLOMAX 16 16 CAVITIES PREFORM FEEDER
used
Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder Air transport Blomax 18 as spare parts dispenser Additional costs for spare parts, dismantling, packing and loading: EUR 45,000
used
3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881
used
in stainless steel (stainless steel chain) as hinge belt conveyor approx. 25m approx. 5 drives PREis / m: EUR 260.00 ... with new stowage chain for shrunkEN PET bottles refurbished KHS version !! Price /m: EUR 580.00
used
Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...
used
Overview The disposable PET-ACF line was manufactured by KHS in 2006. Most parts of the line are from KHS. Blow moulder is from Sidel and process department from GEA. The line is for sale, as the complete factory is closed Technical specifications: PET bottle formats 330 ml 500ml Suitable for juices and soft drinks with or without CO² Capacity Non-carbonated drinks: 30.000 bph (330ml 500ml) Carbonated drinks: 24.000 bph (500ml) Control: Siemens S7 Year of manufacture: 2006 The line in detail: Manufacturer: Sidel Machine type: Blow moulder Model: SBO 16 Year of manufacture: 2006 Manufacturer: KHS Machine type: Cap steriliser Model: SCS 8 Flatcap 28mm Year of manufacture: 2006 Manufacturer: KHS Machine type: Cap steriliser Model: SCT 4 Flat 38 mm Year of manufacture: 2006 Manufacturer: KHS Machine type: Filler Model: asmofill ACF 30-70-100-15 incl. supply units for peroxide ...
used
30,000 bottles / h 1994 / very good condition / unit new 2014, both
used
1 of used KHS/Kisters SP100V film-only shrink-packer (multi-packer) operating from right to left, with CB120 laner/divider, new 2004. Capacity upto 100 cycles/minute. The SP 100V was supplied/modified to pack standard (66 mm diameter x heights 115/168 mm) 330 ml (500 ml in future) beverage cans as: 2x2=4 3-lanes, 3x2=6 3-lanes, 4x2=8 2-lanes, 3x3=9 2-lanes and 4x3=12 2-lanes. The CB120 was designed to lane the 6-packs from 3 to 2 lanes and divide the 8-packs (previously turned from long- to short-side leading) from 2 to 3 lanes. Combined controls for the above machines as wells as inter-connecting pack conveyors. Interconnecting conveyors also available.
used
1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2008. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: left. Used for upto 120 cycles/minute in a 72.000 cph line. Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.
used
1 of used film-only multi-packer, make KHS, type Innopack Kisters SP 050 B2, new 2013. Operating side: links. Used for PET bottles 250/500 ml as 3x2=6-packs (dual lane) and 6x2=12-packs as well as 6x4=24-packs (single lane) in clear or print-registered film. Quick change-over via servos and spindles. Capacity upto 50 cycles per minute. Siemens S7 controls.
used
1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2015. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: right. Used in a 60.000 cph line (+30% overspeed). Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.
used
1 of used trayshrinkpacker, make KHS/Kisters, type TSP 80 V, new 2004. Operating side: right. Siemens S7 plc controls. Nordson hot-melt unit. Capacity upto 100 trays/minute. Last used for packing loose and pre-packed (film-only multipacks) beverage cans (standard 66 and sleek 58 mm) cans on tray with or without film as a total of 12, 18 and 24 cans per tray. Quick changeover via servos and spindels. Available beginning 2023.
used
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
used
1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.
used
Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003
used
panel: Simatic Touch Panel; Control: S7; power supply: 230/400 V, 50 Hz; six-track entrance; shrinking tunnel; oil-based central lubrication of the tunnel and packer; ionization. Automatic felling folli. Support for both transparent and printed film. Automatic film bonding. Possibility of packing in one or two lanes depending on the size of the multi-pack format. Supported packaging: glass/PET/can. Operator panel menu: DE/PL/ENG. In our offer we have both right and left machines. Possibility of individual adjustment of formats to customer needs.
used
1 of used PadShrinkPacker, make KHS/Kisters, type PSP A-H (Advanced, High-speed), new 2013, operating side left, with Allen Bradley controls and Rexroth MI servo technology. With bobbin splicer. Used to pack various collations of standard 66 mm diameter beverage cans on pad plus film or in film-only. Was running in a canning line with nominal speed of 109000 cph.
used
1 of used KHS/Kisters SP100V film-only shrink-packer (multi-packer) operating from left to right, new 2004. Capacity upto 100 cycles/minute. Originally supplied/modified to pack standard (66 mm diameter x heights 115/168 mm) 330 ml (500 ml in future) beverage cans as: 2x2=4 3-lanes, 3x2=6 3-lanes, 4x2=8 2-lanes, 3x3=9 2-lanes, 5x2=12 2-lanes and 4x3=12 2-lanes. Last also used for sleek cans. Allen Bradley controls with Indramat servos.
used
1 of used film-only shrinkpacker, make KHS, type SP A-H (Advanced, High-speed), new 2011, operating side: left. Controls: Siemens/Rexroth. Last used to pack multiple diameters/heights of round and rectangular PET bottles in various configurations 1/2/3 lanes, at a maximum speed of 90 cycles/minute (limited by filler speed). In excellent condition.