We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Demo machine Semi-automatic Equipped with 5 tools : - 2:1 1" - 3:1 3/8" New Style - 3:1 1/2" New Style - 5/16" - 2/1 3/4" Binding length : 3:1 : max 60 – min 4 2:1 : max 41 - min 4 Book thickness : 3 mm to 22 mm Output : 600/1200 per hour
used
serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Model: Value, Automatic Punching Machine, Standard Tools, Belt Delivery
used
james burn ex610 - 2:1 square 2:1 round 3:1 square 3:1 hanger punch 4:1 ellipse and separator bracket patterns available james burn epx700 james burn bb43h - 1/4_5/16_3/8_7/16_1/2_9/16_5/8_3/4_7/8_1_ 1/4 hanger 3/8 hanger they have jaws james burn cd610 - 1/4 It can be worn normally and with suspension up to 60 cm.
used
Machine is in good working condition. Punch has been expertly maintained. Rod ends, belts, bearing replaced as necessary to keep machine running tight. Auto Feeder, Punching Unit, vibro table Delivery, 3:1 & 2:1 Punch Max size 380x380 mm 3:1 square 4x4mm perforating tool 2:1 round 6mm perforating tool
used
1 JAMES HEAL Elmatear tear tester for accurately testing textiles, nonwovens, and a wide variety of similar materials, including paper, board, and plastic
used
WIRO closing machine BURN Verfügbar: immediately
used
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Interchangeable jaws: without -Taper cone: Ø 105 mm -Hole circle: Ø 135 mm -Weight: 25 kg
used
3 trimmers horauf SN140, automatic , in very good condition, year 99
used
Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions
used
in working condition
used
Three knife trimmer Make Challenge Model CMT-130B Year 2013 Serial 13040569 Min untrimmed size 171 x 178 mm Max untrimmed size 330 x 241 mm Stack height 51 mm Speed up to 200 cycles per hour in single stream mode or up to 500 books in multi stream mode Change over time Fully automatic within 10 seconds Details 58500B book pile feeder + 58000 vertical stacker Available direct
used
Three knife trimmer - in-line Make Challenge Model CMT-330 Year 2005 Serial 05010048 Min untrimmed size 178 x 127 mm Min trimmed size 148 x 100 mm Max untrimmed size 330 x 330 mm Max trimmed size 307 x 328 mm Stack height 51 mm Min trim 2.5 mm Max trim 152 mm Speed up to 400 cycles per hour in single stream mode Memory up to 99 set-ups Change over time Fully automatic within 20 seconds Details 56600 Tilt in-feed conveyor + 56421 cooling down elevator + 56420 exit conveyor, this machine can be used in-line with a perfect binder Available direct
used
Three knife trimmer Make Challenge Model CMT-330-B Year 2010 Serial 10040217 Min untrimmed size 178 x 127 mm Min trimmed size 148 x 100 mm Max untrimmed size 330 x 330 mm ( Max trimmed size 307 x 328 mm Stack height 51 mm Min trim 2.5 mm Max trim 152 mm Speed up to 400 cycles per hour in single stream mode and 700 in Multi stream mode Memory up to 99 set-ups Change over time Fully automatic within 6 seconds Details 56416 manual in-feed conveyor + 58000 vertical stacker Available direct
used
Size 310 x 400 x 80 mm Size trimmed : max 300 x 388 x 80 mm - min 100 x 120 x 2 mm Speed : max 6.000 c/h Feeding height : max 80 mm
used
max. format 23.50 x 32 cm Year of construction 2006 On demand 3-sided cutter Rotary three-knife trimmers Touch screen computer control fully automatic Block thickness up to approx. 50 mm max. 500 cycles / h (idle) Price on request. We deliver and install worldwide!
used
Equipped with 3 standard tools : A : 207x174 mm B : 134 x 101 mm K :
used
THREE KNIFE TRIMMER ZECHINI MODEL FIORINO -Year 2001 -Max trimmed size 380x330 mms.- Min size 170x120 mms. -Max thickness 50 mms., Min. 5 mms. -Electric power: 5 KW, Speed max 750 copies/hour -Total dimension : 2000x800x1650 mms., Weight : 800 Kgs. -Waste container capacity: 240 liters -Full automatic size change -Complete with in-feed system Zechini RAMPA Year 2001
used
Karl Schnell emulsifier Power: 9 kW
used
Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.
used
K+G Weather SM 120 T2M-R, 120 litre cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keypad, knife shaft speed 2-tourig, 2 bowl speeds, mixing gear forward and backward, temperature-end shutdown, digital display knife shaft temperature bowl, knife head with 6 knives. The machine is currently undergoing refurbishment and will be available shortly.
used
Treif Portion cutter Model: 1943 1998. Stainless, infeed chamber 600mm length x 180mm width x 140mm depth, up to 300 cuts a minute, it is possible to cut large bone-in as well as boneless products, such as bacon, spare ribs, chops and "T-bone" steaks, or dairy products, such as cheese, either fresh, chilled or deep-frozen to - 4°C.
used
K+G Wetter SM 65 STL bowl cutter, 65 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife Speed, 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse, temperature switch off function, knife head with 6 knives. The machine is immediately available and can be tested like in Koblenz, Germany.
used
Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.
used
Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.