used ILAPAK DELTA GE Packing plants

Ilapak stainless flow wrapper Carrera 2000 PC Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel.

Used Ilapak vertical packaging machine Fully refurbished and operational Please contact us for more info

used ilapak Delta G E horizontal bagging machine with running sealing jaws. The machine is mainly used for the production of sealing packages and protective fumigation to extend the durability of various products. The machine requires electricity, compressed air and, if necessary, water. The system can be seen in the photos without a transport table, but of course there is also the transport table. The total length of the machine is about 6400mm depth is 1160mm and height 1550mm plus labeler. The labeler is from Werner Hermann.The packaging machine is about 1600 kg heavy. Until recently, small cartons of Berliners were packed at the plant. The plant is complete and ready for loading in our warehouse in Bielefeld. Payment and shipping on request. 380 Volt Connection 50 Hz 6500 watts Weight approx. 1600 kg incl. labeler

Complet line for packaging. Very good condition. Complete with construction, stairs , etc. Metal detector.

Reel underneath Product Length: 100 mm Max. Product width: 360 mm Product height from 25 to 220 mm Max. Coil width: 800 mm Maximum speed: 60 bags / min

For sale MAP packaging machine. The condition of the machine is perfect. It was packing meat.

Used flowpack packaging machine from IMA Ilapak model Carrera 500 PC. 1 Packing range: - Jaw width 150 mm: L. 50 - 500 mm width 20 - 230 mm H up to 90 mm - Jaw width 180 mm: L. 100 - 550 mm width 20 - 230 mm H up to 120 mm Packing speed up to 100 packs per minute Packing speed depends on product length and film properties packaging film. 3. Packing material: All films used for packaging on this type of machine, hot or cold sealed. (OPP, cellophab, etc.). 4 Film roll sizes: width 650 mm, Outer roll diameter max. 350 mm, Inner roll diameter 76 mm, maximum roll weight 40 kg. 5. voltage: AC 220/380 V, 3 phases, N+E, 50/60 Hz, Energy consumption max. 4 kVa. 6. machine dimensions: 3.930x1.285x1.460, Machine weight 650 kg.

Product dimensions: 650-1200x300x240mm, roll width: 800mm, roll diameter: 350mm, max. speed: 50 cycle/min, length: 5170mm, width: 1452mm, height: 1435mm, weight: 1.1t, one band is torn and needs replacing.

Bodijn weighing line in combination with Ilapak vertical bagger., Complete A-Z weighing and packing line from 2017., Very well build, fully stainless steel., Line consisting of;, - Infeed belt with sophisticated product sensor., - Vibratory feeder, controlled by the multi-head weigher, - Installed on a separate platform, - 14 heads dimple plate multi-head weigher., - Installed on a platform with racks for cleaning with an additional set of buckets., - With collection gate with reject option., - Ilapak continuous motion vertical bagger., Have a look at the video for an overview of the line.

Ilapak Vegatronic 2000 OF (open frame), Perfect machine for a wide variety of products. This machine has a 450mm sealing system that makes it very capable or processing large pouches for bulk products. A very strong and durable build machine for either small and light bags but also capable of heavy portion weights., - Heat seal, - 450mm wide sealing system, - Open frame, making it easy to wash down the machine., More information soon

ILAPAK VEGATRONIC 1000 VFFS BAGGER SERIAL: S 1759 06 400V 3 PHASE POWER

Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Te Koop: Mono pomp R Moneau s patent Type CD901R Nr: 30/70/31347/3 Input: 100MM Output 165 MM 20 M3 / uu.

Water cooler Delta DKS 110 -220 volts -0.7 kW

Cold water heater Delta DK KWE Storage 700 liters My: 2017 -Cold water heaters from Delta bakery machines -Content 700 litres -without refrigeration compressor max. operating pressure 6 bar -max. operating temperature +95 C

FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Delta New Poluclean P30 Dust Extraction System Delta New Poluclean P30 Dust extraction system 400 V 5.5 kW 3500 m³/h 95 liters Weight: 361 kg Metrics: HxWxD = 300 x 100 x 97 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Further extraction systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

High-quality lattice supports with high load capacities, inexpensive alternative for gratings – Brand new – Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (with a 2.70m trusss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1.05m 1,10 1.20m Other depths on request! Evenly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Lattice grid: 50 x 100 or 25x100mm Please also indicate which beam type (truss type) you have! So whether box profile (or IPE carrier) 50 or 40mm, or whether they have trusses with step. Advantages: no sharp edges 200% safety factor – independent of the shelf beams Bealstable for permissible deflection and structural failure Large selection of standard sizes and load capacities MantaMESH is our market-leading wire me ...

Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls  ...

Vertical pot sanding machine DELTA LF 350 Grinding length approx. 350mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2800 rpm Drive power approx. 3Kw Grinding movement right / left - manual Z -Delivery Manual Accessories: Magnet Documentation Wet grinding device 2 x pot disc Puller Grinding wheel protection Fine adjustment Z-axis Dimensions: LxWxH approx. 1x0.8x1.8 meters Weight approx. 600Kg

VERTICAL - POT GRINDING MACHINE DELTA LF350 Cgvnbqkquz Control - Conventional Grinding length approx. 360mm Grinding width approx. 155mm Grinding height approx. 300mm Spindle speed approx. 2850 rpm Drive power approx. 3 KW Grinding Movement / Right - Left / Manual Z - Delivery - Manual Accessories: Magnet Wet grinding device Machine housing Documentation Puller Grinding wheel Fine adjustment Z - axis Dimensions: LxWxH approx. 1x1x1.8 meters Weight approx. 600Kg

: gebraucht : 2007 : 5533 : prompt, Zwischenverkauf v : Italien : 5460 € : 1 : 178 x 78 x 78 mm : 2840 1/min : 250 x 150 mm : 2.2 kW : 830 mm : 750 mm : 1630 mm : 400 kg Cooling Equipment Distance column axis - disc axis 300 mm Max. Distance table - grinding wheel 280 mm Max. Grinding surface 140 x 330 mm Quick feed / handwheel rotation: 2 mm Fine feed 0,01 mm Dimensions of the abrasive elements 50x16x90 mm no User Manual DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Delta Pack Flow Pack Horizontal Set up on granola bars Adjustable trigger and packaging length

Type: CTS30F001 Kind of: electric chain hoist Capacity: 1000 kg

Type: CTS30F001 Kind of: electric chain hoist Capacity: 1000 kg