We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Capacity: 150 l/min Motor: 1,5 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg
used
Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Cat. No. 12-1130 in very good condition Measurements and Weight: LxWxH: 160 x 45 x 102 cm Weight: 192 kg Model: HTIRM Type: 55VT-DS NW 50 4,4 kW 100 l/min, 6000 l/h 9 bar DN 65 Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Continuous mixers, previously used for the polymer admixture INDAG DLM K-2. Stainless steel, great condition 3 kW, 1450 1/min, 16 bar, built in 2005. With replacement mechanical seal, once a new time needed. Operating instructions available.
used
Capacity: Motor: 1,6 kW Working pressure: 10 bar - Input with threaded supports DN 40 - Output with threaded supports DN 40 - Mobile chassis - With cable and CE plug Measurements and Weight: Length: 1100 mm Width: 560 mm Height: 1020 mm Weight: kg
used
* General * SKU329S526 * LocationBarneveld * MakeIndag Maschinenbau GmbH (D) * TypeDLM-1/3 HO (S) * No.4315 * Year of construction2006 * Pressure * Working pressure6.6 Bar * Main Features * MaterialStainless steel * Motor3 KW * Specified Features - Inline mixer * Inletdia. 400 mm, dia. 35 mm, * Outletdia. 35 mm * With jacketcheck * Motor3kW 220-240/380-415 Volts * With frequency controllercheck * Rotor speed400 rpm * With vesselcheck * Capacity49 Ltr. * Vessel sizesdia. 400 x 650 mm * With jacket19 Ltr. * Max. temperature-10/100 °C * MaterialStainless steel 1.4301 (304) * Information * Mounted on framecheck * With switchgearcheck * Total height2,5 M * Weight450 kg * CEcheck * Floorspace1,8x0,9 M * Extra Specifications * With boiler: TWA GmBh &: Co. KG, SN: 015-2006-2542, 49 Ltr., max. working pressure: -0.95/4 bar, max. temperature: -10/100 °C, double-walled: 19 Ltr., max. working pres ...
used
Eccentric screw pump Manufacturer: Seepex Series: BN Size: 17 Pressure level: 12 Operating pressure: 10 bar Operating temperature: - 10 / + 30 Flow rate: 10 m ³/h Revolutions: 260 U/min Year of constr.: 1990 in very good condition!
used
Eccentric screw pump Manufacturer: Pumpenfabrik Wangen GmbH Type: 50 ST - V2A Serial number: 53-651 Material: V2A Flow rate: 10 m ³/h Operating pressure: 4 bar Revolutions: 470 RPM In very good condition!
used
Capacity: 8.4 m3/h Operating pressure test 13 bar Engine: 3.5 kW - With connectors: DN 65, DN 50, DN 65 - With chassis mobile 2 steering and 2 buck wheels - With cable and CE plug 16A Dimensions and weight: Length: 2200 mm Width: 500 mm Height: 1080 mm Note: Pump 100% tested, with functional guarantee On request, it can be infinitely adjusted with frequency inverter for additional costs. Connections can be changed at an additional cost.
new
Netzsch Pump: NM105BY02S12K 30kW, 12 bar, 60m3/h incl. external aerator New, complete, original
used
Bornemann SLH twin screw pumps are single-flow and self-priming. 2 contact-free intermeshing screws and the pump housing from closed chambers tha, according to the direction of rotation, constantly move towards the pressure dischange end of the pump. This axial system enables cautious, low-pulsation conveyance. It protects the media and maintains size, surface and visual intergrity of the products. The 2-in-1 principle conveys and cleans in one pump. Due to the wide range of the pump speeds, process cycles as well as CIP and SIP procedures are possible with just one pump. This pump is previously used in a dairy factory. Capacity: 1.500 ltr/h. Inlet pressure: - 0,1 bar with a differential pressure of 1,7 bar gives an discharge pressure of 1,6 bar. Speed 445 - 585 rpm. Viscosity 120 - 10.000 cst., Type of Machine: Double Screw Pump, Stock Number: 1012, Capacity: 1,5 m3/h, Inlet pressure: - ...
used
Bornemann SLH twin screw pumps are single-flow and self-priming. 2 contact-free intermeshing screws and the pump housing from closed chambers tha, according to the direction of rotation, constantly move towards the pressure dischange end of the pump. This axial system enables cautious, low-pulsation conveyance. It protects the media and maintains size, surface and visual intergrity of the products. The 2-in-1 principle conveys and cleans in one pump. Due to the wide range of the pump speeds, process cycles as well as CIP and SIP procedures are possible with just one pump. This pump is previously used in a dairy factory. Capacity: 2.500 - 2.200 - 2.500 ltr/h. Inlet pressure: - 0,33 - - 0,2 - -0,06 bar with a differential pressure of 4,51 - 3,9 - 0,16 bar gives an discharge pressure of 4,18 - 3,7 - 0,1 bar. Speed 473 - 582 rpm. Viscosity 10.000 - 120 - 120 cst., Type of Machine: Double Scr ...
used
Complete drive 22 kW, 182,5 RPM Gearbox 04/2022 Motor 04/2004
used
1 x NEZTSCH NE80 1 x NETZSCH NU50B, 1 x PCM 100/10 1 x Manufacturer unknown
used
Progressing cavity pump for separator feeding, original pump housing available - was built into a special pump housing, functional due to project change dismantled: Flow rate: approx. 20 m³/h Drive power: 7.5 kW
used
Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall size: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Loading capacity is reliant on viscosity
used
* General * SKU251U351 * LocationBarneveld * MakeBlackmer * TypeGPI C18 I CV * Mach.No.566084 * Pressure * Working pressure1.5 Bar * Main Features * MaterialStainless steel * Volume18000 Ltr. * Motor5.5 KW * Specified Features - Eccentric Screw Pump * MaterialStainless steel 1.4571 (316Ti) * Eccentric Screw Pumps * Pumpcheck * Number of pumps:1 * Capacity± 18 m³/h * With motor5,5 kW, 1450 rpm, (Ex) * Information * Year of construction2005 * Mounted on framecheck * Total height1 m * CEcheck * Floorspace1,7x0,5 m * Weight350 kg * ATEX compatiblecheck * Extra SpecificationsSuitable for most sanitary applications, including food and beverage, pharmaceutical, and cosmetic processes, particularly those that require consistent non-pulsing flow and gentle fluid handling (low shear rate), such as:- In the food industry: flavor, sauce, chocolate, glucose.- In the beverage industry: yeast, concen ...
used
* General * SKU246T571 * LocationBarneveld * MakeNetzsch Nemo * TypeNM053BS * Mach.No.402362 * Pressure * Working pressure3 Bar * Main Features * MaterialMild steel * Volume10000 Ltr. * Motor3 KW * Specified Features - Eccentric Screw Pump * Pumpcheck * Number of pumps:1 * Capacity4-10m³/h * With motor3kW, 400/690Volt, 1425rpm * With frequency invertercheck Nord SK 200E-301-340-A * Inlet250x250mm * OutletDia: 80mm * Eccentric Screw Pumps * MaterialMild steel * Information * Year of construction2008 * Mounted on framecheck * With switchgearcheck(as is) * Total height0,65m * Floorspace1,85x0,45m * Weight180kgEccentric Screw PumpsNetzschPumps > Eccentric Screw PumpsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...
used
Piston dosing pump, type EK 1 H, with batch control via electric pulse preselection counter incl. remote summier movement. Working pressure 7.5 bar, max dosing current 290 l./h, pipe connection Rd 34 x 1/8 inch with hose sleeve NW 15, with control cabinet, mounted on table.
used
Stainless steel pumps, Hilge, Fristam, various versions and sizes
used
Stainless steel pumps, Hilge, Fristam, various versions and sizes, various models, partly new
used
Dosing pump make Lewa HK1, No. 96430,
used
Type: SPS 2" No.: 32990992 Stöber gear N1-n2 = 120-602 min-1 Type: R47-1029-220-4 No.: 1012558 Engine power: 2,2 kW Dimensions: LWH = 1200 x 400 x 800 mm moveable frame Stainless steel cover