used HYDRAP Double Column Pulling Presses

Condition: very good Control system: Siemens Technical details : Machine type: SH-200-2.7 x 1.7 Fabrication No.: P/100010 Year: 2005 TOTAL PRESS WEIGHT: 37300 kg Nominal force: 2000 kN Stroke length max.: 900 mm Installation height: 1400 mm Closing speed: 400 mm/s Working speed max.: 84 mm/s Working speed at nominal force: 30 mm/s Tool footprint max.: 2700 x 1500 mm Tool footprint min.: At nominal force: 1600 x 1100 mm Tool height min.: 500 mm Total tool weight max.: 15 000 kg Tool upper part weight max. : 7500 kg Permitted External load : left-right 30 kNm Permitted Except Load : front-rear 15kNm Installed capacity: 87 kW Rated current: 155 A Tension: 400 V Frequency: 50 Hz Hydraulic operating pressure: 289 bar Total amount of oil: 1500 l Type of oil: HLP 46, DIN 51524

YOM: 5.1987 / 2003 - the press was generally renovated by the manufacturer Schuler, along with the replacement of electrics, cables and controls for Siemens Condition: Very good Technical details: Pressing force: 5000 kN, 500 tone Table dimensions: 1500 x 1400 mm Distance from Clamping surface to ram: 1250 mm Distance from the clamping table to the hold-down device min.405 mm, max.605 mm Clamping surface thickness: 335 mm Number of flutes, dimensions: H12 DIN 650, 36 mm Ram size Stroke:: 500 mm Hold-down size Stroke: 200 mm Press height / weight: 5800 mm / 45 tone

YOM: 5.1987 / 2003 - the press was generally renovated by the manufacturer Schuler, along with the replacement of electrics, cables and controls for Siemens Condition: Very good Technical details: Pressing force: 5000 kN, 500 tone Table dimensions: 1500 x 1400 mm Distance from Clamping surface to ram: 1250 mm Distance from the clamping table to the hold-down device min.405 mm, max.605 mm Clamping surface thickness: 335 mm Number of flutes, dimensions: H12 DIN 650, 36 mm Ram size Stroke:: 500 mm Hold-down size Stroke: 200 mm Press height / weight: 5800 mm / 45 tone

pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic

pressure:200 t distance between columns:1400 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1100 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:150 mm die cushion area:700 x 700 mm capacity of ejector in ram:10 t ejector stroke in ram:50 mm table height over floor:930 mm side window:770 mm ram surface:1300 x 1100 mm speed down:400 mm/s speed up:410 mm/s working speed:20 - 50 mm/s return capacity:30 t oil volume:1350 l power requirement:70,0 kW weight:23,0 t dimensions (WxDxH):4,5 x 3,0 x 3,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic ejector in ram:hydraulic foundation pit:not necessary

Pressure total: 315 ton Stroke: 600 mm Daylight: 800 mm Table surface area : 2000 x 1200 mm Slide area: 2000 x 1200 mm Approach speed: 450 mm / sec Working speed: 14 - 40 mm / sec Return speed: 300 mm / sec Table height over floor: 900 mm Oil volume: 2000 l Required power: 75 kW Height over floor approx.: 5000 mm Dimensions L x W x H: 4900 x 3200 x 5000 mm Weight of machine approx.: 45 ton

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 260 mm stroke: 300 mm table-size: 500 x 500 mm ram head dimension: 650 x 500 mm dayligth: 700 mm oil volume: 600 l capacity of ejector in table: 40 t return capacity: 13 t total power requirement: 22 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2.07 x 2.48 x 3.3 m - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t stroke: 300 mm table surface area: 1200 x 700 mm ram surface: 1200 x 700 mm dayligth: 500 mm adjustment of stroke: 300 mm return capacity: 348 kN capacity of ejector: 100 kN ejector stroke: 100 mm total power requirement: 65 kW weight of the machine ca.: 28 t dimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m = Frame press Accessories: tool changing table - next safety inspection according to stamp 05/2021 - - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 1100 mm stroke: 400 mm dayligth: 600 mm table surface area: 1000x800 mm ram surface: 1000x800 mm table height: 950 mm total power requirement: 65 kW weight of the machine ca.: 25 t dimensions of the machine ca.: BxTxH 0000x0000x3900mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 000 Dimensions (HxWxD): 800x800x1200 mm weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power pack, hydraulic pump, hydraulic pump -double pump -Max. Pressure: 60/200 bar -Liter output: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg

pressure:125 t distance between columns:2100 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table area:2230 x 1300 mm die cushion pressure in table:63 t die cushion stroke in table:60 mm surface of drawing cushion:1000 x 900 mm table height above floor:1050 mm side window:1000 mm ram surface:2100 x 1000 mm speed down:50 mm/s speed up:50 mm/s working speed:10 mm/s oil volume:410 l height above floor:5,95 mm power requirement:22,0 kW Weight:31,0 t Dimensions (WxDxH):3,1 x 1,7 x 5,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic foundation pit:not necessary

PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 12 to SLIDE   stroke: 200 mm ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 1000 kg

Description: Effective stroke: 200 mm Drive type: Hydraulic Voltage: 380 V Rated current: 40 A Power: 20 KW Oil viscosity: HLP 48 Oil quantity: 320 l Approx. Onsite Dimension. (l x w x h): 1,900 x 2,400 x 2,750 mm, weight approx.: 7,000 kg

300 t , Stand distance 1.800 , with rope passage , Installation height 1.000 , Table 1.800 x 1.000 , Ram 1.800 x 1.000 , Hub 600 , Rapid traverse to + From 414 mm/sec. , ram speed 10 - 50 mm/sec. , retraction force 380 kN , table cushion 800 kN , 90 kW , Weight 43.000 kg , ground-level installation

Precision Hydraulic Double-Sided Auto Feed Cutter CSS-806 Pressure: 190 tons Main motor: 7.5 kW Effective area: 2100x1300 kg Dimensions of machinery LxWxH: 4800x3050x2170 mm Pressing Distance: 5....250 mm Weght aprox.: 17000 kg Function of the Machine: - Electronic industries: Optical films, PET, optical adhesive, general tapes, light shading material, foams, etc. - Traditional industries: Prototyping and die cutting machine for stationery, vacuum forming, double blister, footwear, EVA foam disposable plates, puzzles, leather, vinyl tile flooring, oil seals, etc. The machine body is made of high tensile steel that has undergone the annealing process to relieve stress. It will never deform even after long term use. The rotating disk of the cutting plank is capable of reducing wear and tear to extend the life of cutter. With ultra precision oil circuit, the machine  ...

Laboratory Candy pulling machine Application Sugar Pulling, Available 1 Kg, 2Kg & 5 Kg up to 50 Kg, the size of the engine is dependent on the size of the machine The action of the machine is derived from two driven arms rotating independently around a single fixed arm. The machine has one speed and pulling time can be set by means of a timer. The teflon arms are removable. This option is unique to this machine. It allows an easy cleaning. Safety guard automatic stopping with motor and starter Sugar Pulling Machine is mainly to aerated products like Chewy Toffees and others. This machine just stretch the gelatine based sugar mass and work air inside the batch. That avoid stickiness of the chewy Toffee at the teeth and give the product a spongee texture. The Machine is made for Laboratory trials and works batchwise, the product touching parts are made from stainless steel or te ...

Groove width: 3-100 mm Drawing length: 850 mm Stroke: 870 mm Table size: 780 x 430 mm Bore range: Diameter: 10-600 mm Return speed: 40 m/min Cutting speed: 0-16 m/min Total power requirement: 8 kW Machine weight approx. 1.55 t Space requirement approx. 1.8 x 2 x 2.25 m Foundation depth: can be omitted (1.07) m because the machine looks on a steel platform A number of accessories available

Pulling head, pipe assembly device -Internal thread needs to be reworked -with electrical measuring connection -Dimensions: Ø 300/1050 mm -Weight: 215 kg

Finishing unit, modular unit, format processing unit, double end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for an optimal look of the overhang -with keying of 2 sides each -Scraper from above and below -Number: 1x unit available -Price: per piece -Dimensions: 500/450/H650 mm -Weight: 60 kg

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons -Stroke: 110mm -Piston rod: Ø 80 mm -Shots: inside 145 x 47 mm, see photos -Number: 1x cylinder available -Price per piece -Dimensions: 810/155/H410 mm -Weight: 66 kg/pc.