used HENSE Motors

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 3 amp and 10 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 10 amp-25 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 10 amp-25 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 3 amp and 10 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

Hydraulic single column press make HENSELER type PYE 6,3 x 200 SMachine -No: 136 built in 1969Compressive force: 6.3 tPressure force on: 3.5 tRam speed from: 120 mm / sec.Ram speed to: 220 mm / sec.Projection: 200 mmStroke: 315 mmPiston diameter: 80 mmInstallation height: 500 mmTable height: 800 mmTable surface: 380 x 420 mmTable hole: 100 mmPusher bore: 32 x 60 mmOil filling: 120 lOutside dimensions approx: 650 x 1100 x 2100 mmDrive power: 4.0 kWWith- Two-hand release- Press time adjustment- Pressure control- Hand lever operation- pneumatic hold-down- Speed control by hand lever in setup modeused, despite the year of construction in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your  ...

Instruction manual is available.

Description: Serial number: P5076870 Pressing force: 15 to For further technical data see type plate With press protection grid Manufacturer: LEINHAAS weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm

pressure:015 t throat:200 mm stroke:4 - 70 mm no. of strokes:140 /min distance table/ram, max. stroke up, adjustment up:310 mm table surface area:430 x 395 mm hole in the table:165 x 160 mm table height over floor:560 - 735 mm table adjustable:175 mm ram surface:160 x 130 mm ram adjustment:80 mm power requirement:1,2 kW weight:0,9 t Dimensions (WxDxH):1,0 x 1,25 x 1,8 m clutch:Drehkeil overload protection in ram:mechanical

pressure:035 t throat:225 mm stroke:8 - 100 mm no. of strokes:110 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:580 x 460 mm hole in the table:250 x 150 mm table height over floor:700 mm table adjustable:230 mm ram surface:355 x 120 mm ram adjustment:70 mm power requirement:2,2 kW weight:1,5 t dimensions (WxDxH):1,0 x 1,5 x 2,05 m clutch:rolling key overload protection in ram:mechanical

pressure:050 t throat:255 mm stroke:8 - 120 mm no. of strokes:115 /min distance table/ram, max. stroke up, adjustment up:380 mm table surface area:640 x 500 mm hole in the table:250 x 180 mm table height over floor:710 - 930 mm table adjustable:220 mm ram surface:550 x 170 mm ram adjustment:70 mm power requirement:4,0 kW weight:3,1 t dimensions (WxDxH):1,5 x 1,5 x 2,3 m

pressure:050 t throat:250 mm stroke:8 - 120 mm no. of strokes:100 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:650 x 515 mm hole in the table:115 mm table height over floor:790 - 1020 mm table adjustable:230 mm ram surface:390 x 180 mm ram adjustment:70 mm power requirement:2,0 kW weight:2,6 t dimensions (WxDxH):1,1 x 1,4 x 2,2 m overload protection in ram:mechanical

Pressure:080 t throat:300 mm stroke:8 - 140 mm no. of strokes:60 / 90 /min distance table/ram, max. stroke up, adjustment up:420 mm table surface area:800 x 600 mm hole in the table:330 x 230 mm table adjustable:230 mm table height over floor:750 - 980 mm ram surface:600 x 240 mm ram adjustment:100 mm power capacity:4,5 / 6,9 kW Weight:5,5 t Dimensions (WxDxH):1,4 x 2,5 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:hydraulic overload protection in ram:hydraulic

Pressure:035 t throat:225 mm stroke:8 - 100 mm no. of strokes:130 /min distance table/ram, max. stroke up, adjustment up:370 mm table surface area:580 x 450 mm hole in the table:210 x 170 mm table height over floor:700 mm ram surface:350 x 180 mm ram adjustment:70 mm power requirement:2,2 kW weight:2,2 t dimensions (WxDxH):1,0 x 1,8 x 2,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical

AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de

10 pieces of engine with gear without generator and starter construction year 1990 - in 1998 Nissan Primera, Almera, Sunny, Micra, Blubird parcel price

SEW-motors with gearbox v. 1, 5kW - 15kW.Die engines have been used mint condition and never.Visits by appointment at any time.

E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.

E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.

3 Phase brushless servomotor Never used! For all technical data please see pictures

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520

Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520

2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm

DATA ON THE MACHINE Machine type: Permanent magnet - DC servo motor Manufacturer: INDRAMAT Model: MDC 10.40C / MMA-0 / S06 Condition: ready for use (used) Price 550 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MAH-1119-9 Description We offer you a used DC servo motor from the manufacturer Indramat suitable for e.g. MAHO MH700 X or Y axis Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM