used HURCO EDM Machines

Machine Details Stock number 1105-03764 Machine type CNC lathe Brand HURCO Type TM8 Year of construction 2012 Control type CNC Storage location HAGUENAU Country of origin Delivery time at short notice - by arrangement. Freight base delivery from location. Technical details Turning diameter 305 mm Turning length 477 mm Planweg. (x-axis) 203 mm Longitudinal travel 508 mm Spindle bore 52 mm Speed 4800 rpm Tool turret 12 Rapid traverse 19/24 m/min Total power requirement 11 kW Machine weight ca. 3800 kg Information Equipment: - Winmax CNC control - 3-jaw chuck - 12-fold revolver - Tool measurement -Tailstock -Conveyor - Coolant device

HURCO TMX8MYi 5-axis CNC lathe Year: 2020 Condition: Excellent Under Power: Yes Specifications: Distance Between Centers: 29.7" (755mm) Swing Over Bed Diameter: 20" (508mm) Swing Over Cross Slide Diameter: 20" (508mm) X-Axis Travel: 8" (203mm) Z-Axis Travek: 22" (559mm) W-Axis Travel: 25.2" (640mm) Y-Axis Travel: +/- 2.2" Max. Turning Diameter: 13.2" (335mm) Max. Turning Length: 20.8" (528mm) Max. Bar Capacity: 2.53" (64mm) Spindle Motor: 37.3 HP Spindle Nose: A2-6 Chuck Diameter: 8" (203mm) Tool Capacity: 12 Stations Tool Type: BMT65 / DIN 1809 Turret Index Time-Adjacent: 0.16 Seconds Turret Index Time Furthest: 0.55 Seconds X-Axis Rapid Traverse: 945 IPM Z-Axis Rapid Traverse: 1,181 IPM W-Axis Rapid Traverse: 1,181 IPM Y-Axis Rapid Traverse: 472 IPM Live Tooling Spindle Motor: 8,5 HP Machine Height: 100.5" Required Floor Space: 209.9" x 124.5" Machine  ...

This machine is truly in new condition!! X Axis (mm) 168 Z Axis (mm) 356 Turning diameter max. (mm) 215 Swing over bed diameter (mm) 405 Swing over cross slide diameter (mm) 240 Spindle Speed max. (1/min) 6,000 Spindle Torque max. (Nm) 114 Chuck diameter (mm) 169 Spindle Power max. (kW) 13 Draw Tube Diameter (mm) 45 Rapid traverse X-Axis / Z-Axis (m/min) 30 / 30 TypeVDI 20 Stations 12 Bore Bar Diameter max. (mm) 32 Tool Shank Width (mm) 19 Ls Floor space required (mm) (doors open, incl. control and chip conveyor) 3,916 x 2,525 x 2,144 Machine weight (kg) 3,250

Vertical machining center HURCO VMX84 X travel 2134 mm Y travel 864 mm Z travel 762 mm

Table length: 1220 mm Table width: 510 mm Longitudinal X: 1020 mm Cross Y: 510 mm Vertical Z: 610 mm Positions ATC: 20   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Ultimax MACH-id     6031 MAKE         HURCO TYPE           BMC 4020 YOP             2000 SPECIFICATIONS X - Travel        1020 mm Y - Travel          510 mm Z - Travel           610 mm Table Length        1220 mm Table Width           510 mm Table load             683 Kg Feed rate X-Axis          20.000 mm/min. Feed rate Y-Axis           20.000 mm/min. Feed rate Z-Axis ...

This Hurco TM8i Lathe was manufactured in the year 2018 and has 7006 production hours, of which 1696 spindle hours. It is equipped with a HURCO control unit. The machine has a spindle speed of 4000 rpm.

Trackball with connection cable for Ultimax control Replacement for Hurco Ultimax 4 , Ultimax 3 Easy to change, ready to ship New

Max. load: 500kg, feed rate: 3-7600mm/min, rotational speed: 80-8000/min, length: 4000mm, width: 3776mm, height: 2692mm, weight: 4.15t.

Travel X/Y/Z: 1270mm/660mm/610mm, max. spindle speed: 15000rpm, feed X/Y/Z in mm/min: 15200/15200/15200. table load (uniform): 1360kg, dimensions X/Y/Z: approx. 4900mm/4600mm/3000mm, weight: approx. 10000kg. On-site inspection is possible.

Machine Details Stock No. 1105-03273 Type of machine Machining Center - Vertical Make HURCO Type VMX 42 M 2008 Year of Manufacture Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis ex work Technical details x-travel 1060 mm y-travel 610 mm z-travel 610 mm work surface 1200 X 610 mm engine output (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Control Ultimax 4 weight of the machine about 6 t Additional information ultimax 4 8000 rpm

HURCO VM10 Vertical Machining Centre. Hurco WINMax Control Year of construction: 2010 Manufacturer: Hurco Model: VM10 Control: Hurco WINMAX Spindle Speed: 10000rpm Table size: 762 x 356 mm Tool change capacity: 20 Tool size: DIN40 Traverses XYZ: 560 x 356 x 457mm

No. 5008: 1 gebr. Posten div. Spare Parts - Keyboard / Pcb for Spare Parts Carrier / Retrofit Fabr. HURCO, type Ultimax / Winmax, Accessories: 6 x Input keyboard type 807-0013-005 1 x Input Keyboard Mask 1 x Input keyboard type 807-0013-004 1 x PCB No. 414-0626-002 with Poti RE 45 / 415-0627-001 Other: Shipping weight approx. 6 kg

x-travel: 762 mm y-travel: 560 mm z-travel: 1020 mm control: Ultimax III taper ISO: 40 Table dimensions: 1300 x 700 mm work piece spindle speed: 30 - 4000 U/min voltage: 380 V total power requirement: 7,5 - 5,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm Control: Siemens type: 810 Tools changer for 12 tools: tool taper: ISO 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5552 Type: BMC 24 SSM Producer: HURCO Created: 2004 Parameters: Control system: ULTIMAX Work table length: 760 mm Work table width: 400 mm Spindle drive power: 7.5 kW Tool magazine: 24 pieces Speed: 80-8000 1/min Travel X-axis: 610 mm Travel Y-axis: 405 mm Travel Z-axis: 505 mm Cone: SK40 Machine height: 2650 mm Machine length: 2140 mm Machine width: 2100 mm Machine weight: 4200 kg

Replacement spindle overhauled for Hurco VMX 24S Speed: up to 15,000 rpm Refurbished: February 2013 by SN-Spindeltechnik with test protocol

Table length: 1220 mm Table width: 510 mm Longitudinal X: 1020 mm Cross Y: 510 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Hurco MACH-id    5408 MAKE         HURCO TYPE           BMC 4020 HT YOP             1996 SPECIFICATIONS X - Travel       1020 mm Y - Travel         510 mm Z - Travel         610 mm Table Length     1220 mm Table Width        510 mm Table load         700 Kg Feed rate X-Axis       10.000 mm/min. Feed rate Y-Axis         10.000 mm/min. Feed rate Z-Axis          10.000 mm/min. Spindle Taper        ...

Table length: 1020 mm Table width: 400 mm Longitudinal X: 760 mm Cross Y: 460 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Hurco MACH-id   5407 MAKE       HURCO TYPE         BMC 30 YOP          1997 SPECIFICATIONS X - Travel       760 mm Y - Travel       460 mm Z - Travel        610 mm Table Length      1020 mm Table Width        400 mm Table load            700 Kg Feed rate X-Axis      10.000 mm/min. Feed rate  Y-Axis      10.000 mm/min. Feed rate Z-Axis        10.000 mm/min. Spindle Taper        40 ISO/Bt/Mk Power on spindle        ...

Table length: 1500 mm Table width: 660 mm Longitudinal X: 1270 mm Cross Y: 660 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 3   CNC Brand: _Unknown / Other CNC Model: Ulitmax 4 MACH-id   4089 MAKE       HURCO TYPE         VMX 50 S YEAR        2002 SPECIFICATIONS X - Travel      1270 mm Y - Travel        660 mm Z - Travel         610 mm bed / plano / portal / moving column     VMC Controll       Ultimax 4 Table Length x Width       1500 x 660 mm Table load in kG       1350 Kg Spindle Taper       Sk 40 kW power on spindle     18 kW Spindle speeds / ranges     15000 Rpm ATC tool changer&nbs ...

Table length: 1020 mm Table width: 400 mm Longitudinal X: 760 mm Cross Y: 460 mm Vertical Z: 610 mm Positions ATC: 0   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Ultimax Make Hurco BMC 30 HT Type BMC 30 HT Year 1996 Ultimax Table length (mm)L = 1.020 Table width (mm)W = 400 Longitudinal X (mm)X = 760 Cross Y (mm)Y = 460 Vertical Z (mm)Z = 610 Sk 40 / 8000 / 11 kW Optional Nikken 4e axis  

x-travel: 610 mm y-travel: 405 mm z-travel: 510 mm table surface area: 760 x 400 mm spindle taper: SK 40 spindle turning speed - stepless: 80 - 8000 U/min spindle drive: 7,5 kW max. torque on the spindle: max. 142 Nm feeds: 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical: 24 / 24 / 15 m/min distance table / vertical spindle: max. 600 mm table load: 350 kg no. of tools in magazin: 24 workpiece diameter at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6,8 kg control: ULTIMAX SSM total power requirement: 18 kVA weight of the machine ca.: 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical CNC machining center Manufacturer Hurco Type VMX 50 Control Ultimax ( all options unlocked ) Year of construction 2006 24 compartment tool changer spindle speed 10,000 rpm Tool holder SK40 IKZ internal coolant supply Travel X/Y/Z 1270/660/610 Conveyor Machine is in a used 100% functional condition.

Vertical CNC machining center Manufacturer Hurco Type VMX 30 Ultimax Control Year of construction 2008 spindle speed 10,000 rpm Chip conveyors Travel X/Y/Z 760/510/610 24 compartment tool changer All control options unlocked Machine is in good condition Delivery not yet known because new machine is only being ordered

Machine Details Stock number 1105-037895 Machine type machining center - vertical Brand HURCO Type VMX 40 Year of construction 2000 Control type CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight base from site Technical details x-travel 1060 mm y-travel 508 mm z-travel 650 mm Working surface 1200 X 610 mm Motor power (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Tool changer 30 times Ultimax 4 Control Machine weight ca. 6 t Information HURCO VMX 40 BORN 2004 CNC ULTIMAX 4 Synchronous.Thread 8000 rpm SPAENEFOERDEREr

CNC 5-axes Universal Machining Center HURCO mod. VTX U Manufacturer: HURCO Type: VTX U YOM: 2005 Control: Ultimax 4 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 510 mm C-axis: 360° A-axis: -30°/+110° Spindle speed: 12.000 rpm Spindle motor power: 18 kW Spindle taper: BT 40 Distance between spindle and table: 660 mm Max weight loadable: 260 kg Cooling tank capacity: 380 l Tool magazine stations: 32 Electric connection: 380 V Dimensions (LxWxH): 3720x2700x2900 mm Weight: 13.200 kg