used FIRMA EWM Arc welding machines

Machine type Pulse-Arc inverter welding system Brand EWM Type Phoenix 300 Expert Supply voltage 3 x 400 volts Adjustment range 5 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 220 amps 100% ED at 170 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 1,000 x 480 x 1,100 mm Weight 65 kg Age approx. 10 years Condition workshop-tested very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of welding gloves with cuff 1 piece spare parts box kpl. Equipped 1 can non-stick spray ME 4000 1 piece instruction manual Warranty 6 mont ...

All welding machines are tested for function. Supplied with operating instructions and circuit diagram. Technical data can be found in the attached data sheet. If you have any questions, please do not hesitate to contact me.

Specifications: - Welding current 600 A 45% ED 520 A 60% ED - 400 A 100% ED - Welding current adjustable - in 2 coarse stages and 10 fine steps from 50 A to 600 A - Digital Volt + Ampere display - 4 roller wire feed infinitely adjustable - Control M 100 for : - Two-stroke – four-stroke regulation - Interval welding - Spot welding - Stepless creep speed and wire backburn time - Intermediate package to the separate wire feed case approx. 4 lfm - Hose package approx. 4 lfm - Ground cable - Pressure reducer - Connection 400 V - Space requirement approx. W 650 x H 850 / 1250 x D 1100 mm - Weight approx. 280 kg

Arc welder EWM Type MIG 230 Fabr. No.: L/0340 Year of construction 1994 Power 230 Amp. = 35 % ED 120 Amp. = 100 % ED Setting range 8 steps Mains connection 400 Volt, 50 Hz, 16 Amp. Plug 2-stroke and 4-stroke welding device- Spot welding device - 2-roller wire feed - 3 meter hose package with central connection - Welding gas pressure reducer Space requirement L x W x H 1000 x 450 x 700 mm Weight 70 kg good condition; used

Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 400 A -with pulse function -4-roller drive -Water-cooled -Incl. Ground cable -with: detachable wire feeder -Gas fitting - Hose package 4 m -Number: 1x device available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Key data: 5 A, 80 V, 400 V

- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V  ...

Description: For all other technical welding data, see photographed type plate Incl. the hose packages shown in the photos Attention: without the gas cylinder shown in the photos weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,000 mm

Offered out of insolvency is a DC TIG welding machine EWM Tetrix 301 Activarc with Comfort T3.24 control Year of construction 2009 spotarc/ second pulse 2/4 stroke Water cooling Welding range 5-300Ampere 300Amps at 60% ED 250Amps at 100% ED Bzn9kovxtp 8meter hose package, with ground cable and pressure reducer

Description: Includes wire feeder weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 700 x 1,400 x 1,400 mm

Description: Serial number 0000476679 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 800 x 400 x 900 mm

There are 5 welding machines available, some of which are defective. 1) EWM WEGA 400 MIG DW, defective: unknown. 2) MAHE c-MIG 5000 WWK, partially functional, ignition problems. 3) MAGE c-MIG 5000 WWK. 4) MAHE c-MIG 5000 WWK, defective: Error in display. 5) NIMAK CMK 400, all welding machines including water cooling, intermediate hose package and wire feed case. The welding machines are only sold as a package. Individual machines cannot be sold separately.

AUTOMATIC THREAD ROLLING MACHINE, Flat die thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine -Manufacturer: EWM, Flat Die Thread Rolling Machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurl plate: RAA 1.0 -Central lubrication: -Dimension: 1680/920/H1440 mm -Weight: 1308 kg

TIG welder, inverter welder, TIG welder, inverter welder -Max. Welding power: 350 A -Accessories: welding cable with electrode clamp, earth cable -Number: 2 welding machines available -Price per piece -Dimensions: 390/550/H530 mm -Weight: 56kg

Robot Kawasaki RA006L E-Controller new & original packaging Year of construction: 02/2018 Control: FE1 E-Controller Max. payload: 6 kg Max. working range: approx. 1650 mm Standard configuration consisting of: • Robot kinematics • Controller (10m cable to robot kinematics) • Teach Pendant (10m cable to controller) Interfaces: • RS232 • 2x Ethernet (separately confi ...

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition.

With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible.

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 354 KW Plant No. 126.411 Connection voltage 3 x 400 Volt Setting range 25 – 350 amps Duty cycle 40 % ED at 350 amps 60% ED at 280 amps 100% ED at 250 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,000 x 400 x 1,000 mm Weight 65 kg Age 12 months Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of welder gloves with gausty 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 1 piece i ...

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 454 DW Series No. 109.129 Connection voltage 3 x 400 Volt Setting range 20 – 450 amps Duty cycle 50 % ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,100 x 490 x 1,200 mm Weight 140 kg Special accessories Rotary connection on the DV case, filter attachment Control panel in the DV box, wheels on the DV case, Control panel cover flap Age 5 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable ...

Arc welder CLOOS Type GLC 357 N Fabr. No. 476 Year of construction approx. 1985 Nominal power 350 Amp. Power 350 Amp. - 80% ED 310Amp. - 100% ED setting range infinitely variable connection hose package 3.5 meters mains connection 380 volts, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 3.5 meter hose package- 4 meter hose package with central connection and BINZEL hand torch - water-cooled- pressure mannometer for gas cylinder Space requirement L x W x H 1300 x 600 x 1100 mm Weight 260 kg good condition; used

Arc welder CLOOS Type GLC 357 N Fabr. No. 576 Year of construction approx. 1985 Nominal power 350 Amp. Power 350 Amp. - 80% ED 310Amp. - 100% ED adjustment range infinitely variable connection hose package 4.5 meters mains connection 380 volts, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72 ZK with 2 roller drive and 4.5 meter hose package- 3 meter hose package with central connection and CLOOS hand torch - water-cooled- pressure mannometer for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H 1250 x 600 x 1100 mm Weight 260 kg; used

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...