used FRITZ WERNER Portal Milling Machines

No. 5100: 1 gebr. Vertical milling machine Fabr. FRITZ WERNER, type FV 2

Article number: 07-99-001 Manufacturer: Fritz Werner Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1900x1800x1800mm Weight: approx. 1200kg Travel: X-axis: approx. 600mm Y-axis: approx. 200mm Z-axis: approx. 500mm Table clamping surface: approx. 740x220mm Spindle: Speed range: approx. 3000rpm Drive power: approx. 7.5kW Feeds & rapid traverses: in all 3 axes Max. milling area (dovetail): approx. 400mm width Swivel range 1st & 3rd milling spindle: approx. 50-80 degrees Height adjustment 1st & 3rd milling spindle: approx. 80mm Height adjustment 2nd milling spindle: approx. 50mm Accessories  Left/Clockwise  Mechanical vise  10 pieces of various milling head attachments  Work light Other accessories on request Price and other technical data on request

Without documentation, with accessories, the automatic feed is defective.

Universal milling angle head, milling angle head -Take: SK 50 -Flange holder outside diameter: 380 mm -Mounting hole circle: 320 mm -Admission drive diameter: 60 mm -swiveling -Quill stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Description: Rotation speed range: 45 - 2000 rpm With swiveling milling head Table dimensions: approx. 1000 x 315 mm Attention: the hydraulic machine vice is not included in the scope of delivery and purchase weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 2,000 x 2,000 mm

SPLINE SHAFT GRINDER Make: Fritz Werner Model: 3.275 Grinding length: 1600mm Center Height: 300mm Workpiece max diameter: 600mm Table length: 2500mm Table width: 180mm Other Info: THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS and ACCESSORIES.

MAX DIAMETER 200 MAX LENGHT 2500

Horizontal fraesing machine with swivel vertical frescent head (3510.3), table 315 x 1000 mm, x/y/z = 710/260/420 mm, Sk 40, speed range 45-2000 rpm, feed range 16-800 mm/min, eilgaenge 4 m/min, weight approx. 1.5 t

wheel diameter: 900 mm depth: 900 mm width: 940 mm height: 1.050 mm Disc-Ø: 900 mm Depth: 900 mm Height: 1.050 mm Width: 940 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: mm weight: 160 kg chucking diameter: 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Total weight: 160 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tailstock, counter bearing for dividing head, dividing attachment -Height: adjustable -Recording: top -Dimensions: 245/280/H200 mm -Weight: 28 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -grinding wheels: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

Description: Additional information: Shaft vice + prism, - ideal for drilling and simple milling work, - can be used in horizontal and vertical positions, - V-block and jaw inserts hardened and ground, robust cast iron design, technical details: jaw width 110 mm, quantity 1 piece Approx. Onsite Dimension. (l x w x h): 250 x 200 x 180 mm, weight approx.: 30 kg

grinding length: 1600 mm centre height: 185 mm diamter spiral cutter: 55mm mm indexing: 4-32 Modul length: 5900 mm width: 2300 mm height: 2000 mm weight: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 800 mm z-travel: 700 mm table:: 2000 x 630 : control: Heidenhain type: TNC 355 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kneader UC 80 AL with an extendable tray. Basic refurbished dough quantity: approx. 130 kg

Kegelrundwirker W&P CR 59 -Bread dough Rundwirker Werner & Pfleiderer -Model CR 59 -with oiling -With Teflon Kegel -with hot air

Used Spiral Kneader / Chargenneter W&P, Type: UC80 A -In the bakery state- - including 3 tank wagons - for 80 kg flour or 120 kg dough - in the bakery state - Condition: Good, ready for immediate use Sightseeing and test run are of course possible at any time on request.

A used dough cradle W&P Parta U with stainless steel cladding is currently for sale and immediately available in our warehouse in Bielefeld. Dough divider WP Parta U - with 1 chamber - Stainless steel clad - Weight range: 300 grams to 2800 grams - Hourly output: 925 to 1050 pieces - the dough divider is in baker's condition

W&P Batch Kneader Type: UC 80 A with stainless steel boiler Stainless steel spiral Flour dust cover 2x automatic timers 2x speeds for max. 120 kg dough

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009 Sale exclusively to traders or export! We have more than 400 bakery machines and more than 300 ovens permanently in our warehouse in Bielefeld. Multiback Bakery Technology Artur-Ladebeck-Straße 171 Bielefeld

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009

Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.

Werner Pfleiderer Double Conus Kneader used unfortunately no type plate available, we assume DK65, for which we do not guarantee Machine in condition as returned by the customer, was overhauled according to the previous owner smooth and smooth running, machine automatically switches to the second stage Timer adjustable for 3-30 minutes, head then lifts independently Machine also runs with the head open or can be lifted during operation, this should be corrected before use by means of limit switches The machine must be thoroughly cleaned before use Video about test run and other pictures available

Dough pre-portioner W&P for WP BV-700 dough dividing machines - Dough pre-portioner from WP Haton - for WP BV 700 dough dividing machines / dough weighers - with pedestal and ladder - in stainless steel - Year of construction 2014