used FIBRO Gear motors

Pneumatic round-table table 400 mm

Pneumatic round-table table 400 mm

Pneumatic round-table table 400 mm

Hydraulic round table, for adaptations, etc.

Hydraulic round table with 4 stations, 800 mm

Hydraulic round table FIBRO P10400UN with 3 jaw holder, for adaptations etc. division: 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 96

Hydr. Four-column press make FIBRO FISCHER-BRODBECK type UVOS 20-SMachine -No: 12-302-06, built in 1967Press force: 20 tRetraction force: 10 tOperating pressure: 250 barPiston diameter: 100 mmStroke: 420 mmTable and bear size: 730 x 510 mmClear dimensions between the columns: 290/500 mmInstallation height: 600 mmColumn diameter: 70 mmWeight approx: 1350 kgExternal dimensions approx: 1200 x 1150 x 2400 mmWith- Pressure display- Pressure control- Holding time setting- Zweihansausrückung- Emergency stop switchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Federal load - 1500 kg Federal width - 500 mm Outer diameter - Max 1250 mm Spreader range without attachment segments 310-460 mm, 410-560 mm High of lateral ditches. Strip lines approx. 470 mm Bc9eg37hb2 Speed of the reel shaft - 16 U / min, power 0,55 kW Manual spreading, adjustable -Torque limiter, soft start, - band drain brake -with push segments -hydraulically actuated process equipment â?? completely. Hydraulic unit mass - L 3300 B 1500 H 1500 mm

table length: .. mm table width: . mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary indexing table with hydraulic drive; -Diameter Ø approx. 400 mm; -Total dimensions: approx. 570 x 450 x 210 mm; -The rotary indexing tables come from RASOMA RBM 60 ring processing machines; Attention! Since we have several of these units, the photos are just examples.

rotary indexing table with hydraulic drive; -Diameter Ø approx. 400 mm; -Total dimensions: approx. 570 x 450 x 210 mm; The rotary indexing tables come from RASOMA RBM 60 ring processing machines.

4-column press make FIBRO FISCHER - BRODBECK type UVOS 63Machine -No: 12-306-08, built in 1964Press force: 63.6 tRetraction force: 33 tOperating pressure: 250 AtuTable surface: 500 x 750 mmClear dimensions between the columns: 260/530 mmStroke: 350 mmInstallation height: 600 mmOutside dimensions approx: 1400 x 750 x 3000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.

Short stroke unit, linear guide, 52.25.4.0150, travel 150mm, fibro, new Special price!! If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. The drive of the unit is a plunger cylinder system with adjustable end position damping. The linear movement is alternately generated by one of the two oil-loaded cylinders. Operating pressure 80 to 120bar, Assembly and operating instructions, spare parts list and drawings Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

table diameter: 800 mm table load: 6 t table height: mm weight of the machine ca.: 950 kg NC rotary table make FIBRO type FIBROPLAN Ø 800 mm rotary table with increased geometric accuracy with 8 star-shaped T-slots 18H8 according to DIN650 with centering hole Ø40H6 mounting height 250mm total ratio 1:600 direct measuring system ROD880C/36000 weight approx. 950 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic rotary indexing table with face teeth FIBROTAKT Hydraulic rotary indexing table, rotary table type Y 13 630 FN3RA T6 Fabr. No. 11 136-0840 Year of construction 1981 Table diameter 630 mm Table height = height 250 mm Table passage 50 mm Switching angle 60 Hydraulic working pressure 30 bar - fixed switching step of 6 pitches - Face toothing for highest part accuracies - Hydraulic drive - Table structure with 6 hydraulic clamping devices (inner collets 90/100 mm) Space requirement table L x W x H 700 x 700 x 250 mm Space requirement with structure L x W x H 1380 x 1380 x 800 mm Weight table approx. 600 kg Weight with superstructure 1350 kg good condition; used

length: 1250 mm width: 1250 mm : 1595 mm : 10 t : 290 mm : 2,0 t : 1,8 x 1,3 x 0,3 m - The round table comes from an exhibition and is new! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0.0, Fibro, used Top Special price !! If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. Technical data - SEW Eurodrive worm gear motor SA57 DR63M4/BR/TF, N=1320/35/min., i=38,23, 0,18KW, 230/400V, incl. brake 400V, - FIBROTOR rotary indexing table ER15, ER.15.0410.1.152.12.0.0, Fibro, - pitch 12, direction of rotation left u right, - All technical details see photos Attention: We also have the mechanically machined rotary table top made of aluminium D1800mm x 25mm thick, we are happy to offer this to you. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operatio ...

2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Manufacturer: Fibro punch die pillar frame -Type: 201.31.056. Din 9822C 100x80 -Stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg

Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing attachment, dividing head, rotary indexing table rotary coupling -Manufacturer: Fibro, Fibroplan rotary table with drive -Type: NC1.03.0340.1.1.04.04 -Table diameter: 340 m -Clamping: hydraulic -Drive: Indramat servo motor type 112B-0-LD-4-C/180-A-0/Wi533LX/S011 -Number: 3x round table available (1 x with base plate) -Price per piece -Dimensions: 660/640/H550 mm (with base) -Weight: 420 kg (with base plate) /pc.

Shock absorbers, gas springs, shock absorbers -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Number: 5 pieces available -Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece

Shock absorbers, gas springs, shock absorbers -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Number: 8 pieces available -Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece