We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Pneum. Single Column C-Form Press Fabr. TOX Pressotechnik Type S50.4.80.6 / PC 50Year of construction 1989Pressing force: 440 kN / 44 tTotal stroke: 80 mmof which power stroke: 6.0 mmCompressed air connection: 6.0 barTable size: 596 x 496 mmInstallation height: 500 mmDiarrhea hole: 120 mmWith- Press frame PC 50- Power package S50.4.80.6- 2-column guided ram plate- Underframe U 50- protective cover SH 50- Press control ST 03 3/4 - Setup mode = additional deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic press ZHO700N Manufacturer: Presshydraulika Year: 2015 Nominal pressing force ... 700t Clamping table surface ... 2500x1500mm Plunger stroke ... 500mm Installation height ... 1200mm Pestle dimensions ... 2400x1000mm Distance between stand ... 2500mm Control Siemens Force of the lower ejection ... 234t Stroke of the lower ejection ... 200mm Machine weight ... 52000kg L x W x H ... 5150x2870x4710mm The machine is in good condition, possible to test under power.
used
PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM
new
Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland
used
C - Frame Pneumatic, Hydraulic Press Pressing force: max. 75 to. Control: STE 328-89-1 1/2'' complete. Table area: 996 x 695 mm. Installation height: max. 600 mm. Total stroke: 150 mm. Force stroke: 10 mm. Incl. 2 - hand control panel, protective device and documentation. Weight: 5700 kg. Abm. WxDxH: approx. 1300 x 1700 x 3700 mm. Good operational condition. The machine can be inspected and demonstrated under power in consultation and is immediately available. Please also note my other entries.
used
: gebraucht : 2005 : 7289 : prompt, Zwischenverkauf v : Italien : 13800 € : 1 : 20 to : 550 mm : 370 mm : 110 mm : 5 - 75 mm : 160 1/min : 187 x 143 mm : 35 mm : 38 mm : 185 mm : 225 mm : 225 mm : 1,5 kW : 1050 mm : 1250 mm : 2100 mm : 1150 kg 2 V-guides Front and side table shielding by safety doors 2-hand control and foot pedal Clamping plate Thickness table and clamping plate 50/50 mm User Manual in German CE Declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Hydropneumatic mode of operation Max. punching height: 90 mm Resister stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg
used
Key data: 750 kN, 150 mm
Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V
used
Used Mechanical C-Frame Press PRESSIX 130 ton used machine in excellent condition dimension table 700 x 1200 mm dimension ram 550 x 800 mm adjustable slide 110 mm
used
* General * SKU300U589 * LocationBarneveld * MakeKorsch * TypeEK 0 * No.K0000094 * Year of construction2001 * Main Features * Tablet Diameter20 mm * Specified Features - Single stroke tablet press * MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L), Tool steel 1.2721 * Single stroke tablet presscheck * Tablet diametermax. 20 mm * Filling depth0-20 mm * Die diameter20 mm * With filling shoecheck * With hoppercheck * Capacitymax. 3600 st. * With motor0,55 kW, 220/380Volt * With variable speed drive10-60 rpm * Information * Mounted on frameStainless steel cabinet * With switchcheck * With switchgearcheck * Weight180 kg * CEcheck * Floorspace0,74x0,46 m * Total height1,90m * Extra Specifications- with various press tooling - compression force indication Single stroke tablet pressesGeneric medicinesKorsch PressenPresses > Single stroke tablet pressesIndustries > Pharmaceutic ...
used
* General * SKU300U588 * LocationBarneveld * MakeKorsch * TypeXL 100-8-EUD * No.K1510018 * Year of construction2001 * Main Features * Tablet Diameter25 mm * Material * Specified Features - Rotating tablet press * Rotating tablet presscheck * Number of stations:1 * With punching dies8-10-12 * With key on punching diescheck * Tablet sizes13-16-25 mm * Filling depth0-6/6 mm: 4-10/10 mm: 10-16/16 mm * With motorcheck (2,2kW, 220-240/380-415 Volt, 1400 rpm) * With frequency controllercheck (20-120, 20-120, 20-60 rpm) * Capacity29.000-72.000-86.400 pc/h * With hoppercheck * Information * Mounted on framecheck * With switchcheck * With switchgearcheck * Weight960 kg * CEcheck * Floorspace1,6x0,7 m * Total height2 mRotating tablet pressesKorsch PressenPresses > Rotating tablet pressesBrand > Korsch Pressen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...
used
Key data: 72 kN, 60 mm, 200 mm
Very neat C-column press from TOX Pressotechnik Very good condition,
used
Profile height max. 160 mm Resistor stroke 100 mm Punching stroke 20 mm Pressing force 35 kN Compressed air connection 6-8 bar Weight approx. 350 kg
used
Hydropneumatic operation Profile height: 150 mm Max. hole height: 120 mm Resistor stroke: 100 mm Punching stroke: 18 mm Press force: 28 kN at 8 bar Max. profile height: 100 mm Weight: approx. 250 kg
used
Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN
used
Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...
used
Manufacturer: Eckverbinder Presse pneumatisch,
used
Press capacity: 100 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 800 x 500 mm Slide area: 800 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 160 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1600 x 1700 x 2930 mm Weight of machine approx.: 5,5 ton
used
Press capacity: 30 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 2,5 ton
used
Press capacity: 60 ton Stroke: 400 mm Daylight: 500 mm Table surface area : 500 x 500 mm Slide area: 500 x 500 mm Table height over floor: 850 mm Approach speed: 100 mm / sec Working speed: 10 mm / sec Return speed: 150 mm / sec Required power: 7,5 kW Dimensions L x W x H: 1500 x 1400 x 2600 mm Weight of machine approx.: 3,5 ton
used
Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin.
new
pressure: 10 t stroke: 30 mm table surface area: 105 x 366 mm distance between columns: 366 mm column daylight: 70 mm : 32 mm total power requirement: - kW weight of the machine ca.: 55 kg dimensions of the machine ca.: 500 x 700 x 1030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 15 t stroke: 160 mm press capacity: 147,15 kn Pressure power: 382,2 bar column daylight: 555 mm : 80 tank capacity: 1,5 l distance between columns: 134 mm weight of the machine ca.: 134 kg dimensions of the machine ca.: 825 x 600 x 1880 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 160 t stroke: 400 mm tank capacity: 51 l pressing speed: 2,40 mm/sec column daylight: 1500 mm feed speeds: 7,48 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar engine output: 3,0 kW speeds:: 2 : 280 mm range L-W-H: 2125 x 935 x 2270 mm weight of the machine ca.: 1430 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 100 t stroke: 380 mm tank capacity: 54 l pressing speed: 2,47 mm/sec column daylight: 750 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar engine output: 2,2 kW speeds:: 2 : 220 mm range L-W-H: 1665 x 865 x 2140 mm weight of the machine ca.: 970 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.