used ELEKTROR KW MÜLLER Motors

Centrifugal fan, centrifugal fan, centrifugal fan ELEKTROR, KARL W. MÜLLER Type: D 1 ( D1 ) Fan wheel diameter: Ø 24 mm 5 m3/min 1,0 kPa Motor : 0.12 kW 2750 rpm 220 / 380 V 3 AC 50 Hz IP44 Ø 82 / 110 mm Output flange: Ø 65 / 1115 mm bolt circle diameter: 96 mm, 4x bore: Ø 10.2 mm fan base: 158 x 120 mm used, tested ! Dimensions: 320 x 240 x 330 mm

Centrifugal fan, centrifugal fan, centrifugal fan ELEKTROR, KARL W. MÜLLER Type: D 4 ( D4 ) Fan wheel diameter: Ø 340 mm 11,3 m3/min 2.0 kPa Motor : 0.5 kW 2800 rpm 230 / 400 V 3 AC 50 Hz IP54 Intake connection: Ø 110 / 128 mm outlet flange: Ø 80 / 130 mm bolt circle diameter: 112 mm, 4x bore: Ø 11.2 mm fan base: 230 x 190 mm used, tested ! Dimensions: 430 x 340 x 470 mm

Unbalance motor electric motor Voltage 220 / 380 Volt Power 0.185 kW Speed 1400 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Elektror, side channel blower side channel blower type SD-4N -Drive: 0.95 kW -Speed: 2760 rpm -Volume flow: 2.8 m3 / min -Connection input: Ø 45 mm -Connection output: Ø 50 mm -Dimensions: 375/360 / H460 mm -Weight: 20 kg

Three-phase motor, electric motor -Voltage: 220/380 V -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 14/30 mm -Construction: B5 -Dimensions: 310/195/H160 mm -Weight: 12 kg

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 9 mm -Construction: B34 -Protection class: IP 44 -Dimensions: 185/112/H145 mm -Weight: 3.5 kg

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

milling station Dust and schnitzel suction PVA (cold glue) back glue PVA (cold glue) side glue Gaze station Stack envelope feeder Envelope groove 2 to 6 times Still in operation: No Available: immediately

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...

Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee

<br><br><br>Still in operation: Yes<br>Available: immediately

New machine editing by: wood, plastic, PVC, Fiberglass, Plexiglas, non-ferrous metals such as aluminum, brass, etc. Technical data: Auflöstung: 0,0018 mm X-Y-Z of precision trapezoidal thread spindles 12 x 3 mm All drive spindles are without triple play ball bearings Table size: 506 mm x 320 mm Traverse paths: x 215 mm, y 375 mm, z approx. 90 mm Passage about 78 mm Prices and further sizes on request

Size max 480 x 320 mm Speed max 18,000 c / h Equipment 1 feeder 3681

book-sewing machine

MEDIUM CUT FOR MÜLLER MARTINI 305

Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Built in 2001 Size main product max 320 x 400 mm min 148 x 210 mm Size supplement min 320 x 400 mm min 105 x 148 mm Speed max 20.000 c/h min 4.000 c/h Working height feeder 1.100 mm Equipment o main product feeder (shuttle feeder for perfect bound books) o opening station with sucker and sword o 4 insert feeder o delivery to the right

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make MÜLLER type ExP 60 SV/HKMachine -No: 6030790Technical specifications:Max. pressing force: 60 tProjection: 280 mmInstallation height: 360 mmTable surface: 750 x 560 mmDrop Hole: 300*200mmTable adjustable: 160 mmRam area: 380 x 200 mmPlunger adjustability: 60 mmRam strokes per minute: 110Plunger adjustable: 10 - 90 mmMotor power: 4.0 kWWeight approx.: 3950 kgwith- Control SIEMENS Simatic OK 27- hydraulic clutch- adjustable table- Two-hand disengagement- straightening unit- Roller feed- Safety device according to UVVused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Single column press make MÜLLER type CD 16.11.55Machine -No: 10480 Year 1983Press force: 16 tTable size: 450 x 350 mmPiston diameter: 90 mmBear size: 320 x 240 mmPiston stroke: 100 mmDiarrhea opening in the table: 100 mmDimensions L x W x H: 700 x 1100 x 2005 mmWith- Cutting impact damping- safe control- Two-hand release- Photocell- infinitely adjustable pressure settingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Burn-butt welding machine make MÜLLER type OM-HASTU I 15/30Machine -No: 1630, built in 1982Transformer power, lasting: 15 kVATransformer power, intermittent: 30 kVAConnected load: 30 kVAOperating voltage / frequency: 380 V / 50 HzMains fuse: 80 Atr.Welding current control: 6 stagesMax. Compression pressure: 1200 daNCooling water consumption: approx. 2 l / minOperating voltage: 380 V, 50 HzExternal dimensions H x L x W: 880 x 1000 x 460 mmWeight without clamping device approx: 390 kgWith- miter clamping device and electrode jaws- separate hydraulic unit:used, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...

Muller Martini Chain for saddle stitchers