used EWM Electric Welding Machines

All welding machines are tested for function. Supplied with operating instructions and circuit diagram. Technical data can be found in the attached data sheet. If you have any questions, please do not hesitate to contact me.

Specifications: - Welding current 600 A 45% ED 520 A 60% ED - 400 A 100% ED - Welding current adjustable - in 2 coarse stages and 10 fine steps from 50 A to 600 A - Digital Volt + Ampere display - 4 roller wire feed infinitely adjustable - Control M 100 for : - Two-stroke – four-stroke regulation - Interval welding - Spot welding - Stepless creep speed and wire backburn time - Intermediate package to the separate wire feed case approx. 4 lfm - Hose package approx. 4 lfm - Ground cable - Pressure reducer - Connection 400 V - Space requirement approx. W 650 x H 850 / 1250 x D 1100 mm - Weight approx. 280 kg

Arc welder EWM Type MIG 230 Fabr. No.: L/0340 Year of construction 1994 Power 230 Amp. = 35 % ED 120 Amp. = 100 % ED Setting range 8 steps Mains connection 400 Volt, 50 Hz, 16 Amp. Plug 2-stroke and 4-stroke welding device- Spot welding device - 2-roller wire feed - 3 meter hose package with central connection - Welding gas pressure reducer Space requirement L x W x H 1000 x 450 x 700 mm Weight 70 kg good condition; used

Machine type Pulse-Arc inverter welding system Brand EWM Type Phoenix 300 Expert Supply voltage 3 x 400 volts Adjustment range 5 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 220 amps 100% ED at 170 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 1,000 x 480 x 1,100 mm Weight 65 kg Age approx. 10 years Condition workshop-tested very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of welding gloves with cuff 1 piece spare parts box kpl. Equipped 1 can non-stick spray ME 4000 1 piece instruction manual Warranty 6 mont ...

Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. Welding power: 400 A -with pulse function -4-roller drive -Water-cooled -Incl. Ground cable -with: detachable wire feeder -Gas fitting - Hose package 4 m -Number: 1x device available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Key data: 5 A, 80 V, 400 V

- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V  ...

Description: For all other technical welding data, see photographed type plate Incl. the hose packages shown in the photos Attention: without the gas cylinder shown in the photos weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,000 mm

Offered out of insolvency is a DC TIG welding machine EWM Tetrix 301 Activarc with Comfort T3.24 control Year of construction 2009 spotarc/ second pulse 2/4 stroke Water cooling Welding range 5-300Ampere 300Amps at 60% ED 250Amps at 100% ED Bzn9kovxtp 8meter hose package, with ground cable and pressure reducer

Description: Includes wire feeder weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 700 x 1,400 x 1,400 mm

Description: Serial number 0000476679 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 800 x 400 x 900 mm

There are 5 welding machines available, some of which are defective. 1) EWM WEGA 400 MIG DW, defective: unknown. 2) MAHE c-MIG 5000 WWK, partially functional, ignition problems. 3) MAGE c-MIG 5000 WWK. 4) MAHE c-MIG 5000 WWK, defective: Error in display. 5) NIMAK CMK 400, all welding machines including water cooling, intermediate hose package and wire feed case. The welding machines are only sold as a package. Individual machines cannot be sold separately.

AUTOMATIC THREAD ROLLING MACHINE, Flat die thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine -Manufacturer: EWM, Flat Die Thread Rolling Machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurl plate: RAA 1.0 -Central lubrication: -Dimension: 1680/920/H1440 mm -Weight: 1308 kg

TIG welder, inverter welder, TIG welder, inverter welder -Max. Welding power: 350 A -Accessories: welding cable with electrode clamp, earth cable -Number: 2 welding machines available -Price per piece -Dimensions: 390/550/H530 mm -Weight: 56kg

Electric motor, electric motor SIEMENS three-phase motor, power motor type 3LE16012BB233GB4 Type V1 Size 225M Motor speed 1475 rpm. Power consumption 84 Ampere Motor power 45 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 60 mm Shaft spigot length 140 mm Wedge groove width in the shaft 18 mm Flange diameter 450 mm Centering diameter 350 mm Pitch circle 400 mm- Flange motor with 8 mounting holes 18 mm Overall length Motor housing without motor shaft 715 mm Overall length Motor housing with motor shaft 855 mm Space requirement L x W x H 855 x 450 x 570 mm Net weight: 320 kg very good condition - New, unused from stock dissolution; used

Electric motor, electric motor LAMMERS three-phase motor, power motor type 1TZ95012AA434AB4-Z Type B3 Size 200L Motor speed 2960 rpm. Power consumption 54 Ampere Motor power 30 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 55 mm Shaft spigot length 110 mm Wedge groove width in the shaft 16 mm- foot motor with 4 mounting holes 19 mm, hole spacing 315 x 300 mm Overall length Motor housing without motor shaft 620 mm Overall length Motor housing with motor shaft 730 mm Space requirement L x W x H 730 x 400 x 520 mm Net weight: 205 kg very good condition - New, unused from stock dissolution; used

Electric trolley, electric trolley for chain hoist, crane trolley, chassis, rolling trolley for double T-beam STEEL type GU-A035400 Fab.Nr. 0104671 Year of construction 1986 Load capacity approx. 1100 kg Roll diameter approx. 80 mm Track width from 65 mm to 110 mm Travel speed 12.5 m/min Motor power 0.42 kW Mains connection 380 volts, 50 Hz. Weight 20 kg good condition; used

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 48 volts -Power: 8 kW -Speed: 2400 rpm -Output shaft: Ø 30 mm -Drive motor for lifting work platforms from GSL (German Standard Lift) -Number: 1x motors available -Price: per piece -Dimensions: 405/195 mm -Weight: 35 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from a Still forklift -Drive: 24 V 2 kW -Dimensions: 370/500/H350 mm -Weight: 82 kg

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 22 volts -Power: 5.2 KW -Speed: 2800 rpm -Shaft: Ø 28 mm -Number: 2x available -Price: per piece -Dimensions: 290/H230 mm -Weight: 26 kg

Forklift motor, electric motor, DC motor, traction motor, drive motor -Voltage: 75 volts -Power: 6.3 kW -Speed: 1400 rpm -Dimensions: 510/320/H280 mm -Weight: 76 kg

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 23 volts -Power: 3 kW -Speed: 1705 rpm -Drive motor for: Steinbock forklifts -Dimensions: 375/230/H200 mm -Weight: 25 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from a Still forklift -Drive: 40 V 2.5 kW -Dimensions: 340/225/H300 mm -Weight: 32 kg

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 48 volts -Power: 0.8 kW -Speed: 2755 rpm -with: Cyclo gear type XFMG3

Electric hoist, crane, electric wire rope hoist, cable winch DEMAG type P 10 Fabr. No. 941 477 Year of manufacture 1962 Load capacity 2000 kg with 4 strings Lifting height 5 meters Hoisting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 volts, 50 Hz - Hoist DEMAG, type 19/11 K28P - Electric chassis DEMAG, type 13 / 6 K8 - 1 travel speed approx. 19 m/min - Chassis for double T-beams, beam width 120 to 180 mm - Load hook for 4 load trains - Control bottle for the hoist with approx. 2.5 meters cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg good condition; used

TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) TIG Welding Machine Fabr. No. 0507214 Year of construction 2007 Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% ED Power Electrode 180 Amp. = 50% ED Mains connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine - infinitely variable power adjustment - 2 stroke and 4 stroke operation - HF ignition - pulse welding mode- rod electrode operating mode- water-cooled - 8 meter TIG hose package with hand torch - inert gas pressure reducer - operating instructions space requirements L x W x H 1000 x 450 x 710 mm Weight 90 kg very good condition; used