We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T
used
X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, max. load: 6t, clamping surface: 220x800mm, controls: HEIDENHAIN Positip 850.
used
x-travel: 2000 mm y-travel: 1000 mm z-travel: 800 mm spindle turning speed range: 4 Stufen von spindle turning speed range: 20 - 3150 U/min spindle taper: SK 60 + SK 50 milling head -swivable +/-: 45 ° copying travel - horizontal/cross: 300 mm copying travel face: 200 mm distance spindle /table: 200 bis 1000 mm distance spindle center to column: 1120 mm table surface area: 4400 x 1000 mm table load capacity: 8000 kp total power requirement: 30 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 7,5 x 5,0 x 4,4 m Machine is in an excellent condition, continuously maintained by the manufacturer • Control D + R, extended with HSM • DROOP & REIN - copy control type kc • HF spindle TDM HK 12-02, 15000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel:2300 mm y-travel:1200 mm z-travel:950 mm feed::max. 4000 mm/min spindle turning speed range:31,5 - 1.600 1/min spindle taper:SK 50 spindle drive:30 kW milling head -swivable +/-:45 ° distance spindle /table:max. 1200 mm table surface area:3000 (4200) x 1200 mm table load capacity:10000 kg Control:TNC 426 HEIDENHAIN weight of the machine ca.:38 t CNC milling machine, from 2008 with HEIDENHAIN TNC 426 control, in 2022 overhauled, 2 pcs. workbenches 2 pcs. tool cabinet lot of tools (around 140 pcs.), el. handwheel approx. 69.000h "machine on, 18.500h "spindle on" very good condition, under power in factory
used
Table length: 3000 mm Table width: 1250 mm Longitudinal X: 2400 mm Cross Y: 1250 mm Vertical Z: 1000 mm Positions ATC: 0 CNC Brand: Heidenhain CNC Model: TNC 415 Make Droop Rein FSM Type FSM 1255 DA 30 kc N Year 1991 HeidenHain TNC 415 Table length (mm)L = 3.000 Table width (mm)W = 1.250 Longitudinal X (mm)X = 2.400 Cross Y (mm)Y = 1.250 Vertical Z (mm)Z = 1.000 130 / Bt50 / 3150 Rpm Copy attachmentAngle + / - 45 Gr Weight 47.500 Kg Power 30 kW
used
FIXED BENCH MILLING MACHINE with SWIVEL VERTICAL HEAD and PRISMATIC GUIDES. Brand : DROOP & REIN. Model: FS130gku. Table: 2200 x 800 mm. Long crossbar : 1700 mm. Transverse crossbar : 870 mm. Vertical crossbar : 800 mm. Spindle taper : ISO 50. THE MACHINE IS EQUIPPED WITH A VIEWER.
used
Universal milling machine Ecomil 100 Heidenhain Control TNC 124 SK 50 56 shots with tools Spindle head swivel Quill extendable 700 x 2000 clamping area Control retrofitted. Feed continuously variable all axes Rapid traverses Length 3.20 m Width 2 m Height 3.50 m Weight 14 tons Spindle 20 - 1000 rpm T slots 22/42 min distance 140 mm
used
Vertical copying and milling machine Make: Droop & Rein Type: FSM 1255 DA 30 kf Year of construction: 1990 Commissioned: 1992 Control: Fidia CNC 11 Spindle Ø: 130 mm Spindle speeds: 80 – 3150 rpm Max. milling power: 30 kW Spindle bore: SK 50 Quill stroke: 200 mm Swivel: + / - 45° Travel: X-2400 mm Y: 1250 mm Z-1000 mm Feed range: 5 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface: 3000 x 1250 mm Max. table load: 10 to Total power requirement:55 kW Space requirements: approx. 8500 x 5500 x 4500 mm Weight: approx. 47 tons
used
X-travel: 680mm, z-travel: 200mm, max. chuck diameter: 250mm, max. swing: 260mm, connected load: 55kW, weight: 8t.
used
This Droop & Rein FS 130 SKE Vertical Machining center was manufactured in the year 1978. It is equipped with a HEIDENHAIN iTNC 426 control unit and has 3 axis. The machine has a spindle speed of 31.5 â 1600 rpm. The machine was completely overhauled in 2022. See information about overhauling details in PDF (DE) attached. Contact us at any time for further questions.
used
X/Y/Z: 3000 mm x 2000 mm x 1200 mm. Control unit : Siemens 840D 3 axis linear slide Machine can be seen in working condition
used
: M01.43870 frequency: 50 Hz voltage: 400 V : 24 V connected load: 48 kW rated current: 63 A control: Siemens 840 D turning diameter: 250 mm turning length: 100 mm weight of the machine ca.: 7,5 t turning length external: / innen 100 mm workpiece length - min.: 29 mm workpiece length - max.: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 3300 mm y-travel: 800 mm z-travel: 1100 mm tool adaptor: SK40 weight of the machine ca.: 28 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table diameter:1400 mm x-travel:2200 mm y-travel:1200 mm z-travel:1100 mm c-axis:360.000 x 0,001 b-axis:+/- 60 ° w-axis:350 mm distance spindle center to column::1100 mm table load:6 t spindle drive:15 kW Torque:4600 nM spindle turning speed range:10 - 1600 U/min spindle taper ISO:50 no. of tools in the magazine:20 Stück total power requirement:45 kW weight of the machine ca.:30 t dimensions of the machine ca.:5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEMENS 840 D control for 6 axis - tool changer for 20 tools - spindle quill 350 mm as W-axis - rotary table as C-axis - angualar milling head indexable - oil cooler, chip conveyor, hand operating panel.
used
An external cylindrical grinding machine is sold, which was in operation until the site was shut down. External dimensions 1.4m wide; 1.2m deep ; 1.6m high Weight approx. 1,5To max grinding length approx. 300mm between the tips max grinding height approx. 80mm top of the table spot center; Grinding diameter approx. 160mm max grinding wheel diameter approx. 300mm Voltage 400V, 50Hz, Cooling medium device a lot of accessories, eg grinding wheels, grinding wheel flange, tool cabinet single-door, see pictures
used
Internal grinding machine very good condition
used
Tool grinding machine, Fabr. Reinecker, WZS 3, used, with extensive accessories Spiral sander Handpiece head Automatic part head Hydraulic table movement Cylindrical grinding device for exterior and interior
used
Suitable for end machining of blanks as well as for peeling grinding of steps, for producing tips, chamfers, radii and their combination at the ends of cylindrical tools made of solid carbide, HSS and ceramic. Up to four different grinding wheels in one clamping. Accessories: NUMROTOplus single-user system software, Software NUMROTOplus touch cycles workpiece (RS/SF), Software NUMROTOplus SF cycles, Software NUMROTOplus cylindrical grinding SF 40 incl. software & hardware (hollow shaft motor), Chuck clamping cylinder pneumatic, Balancing system SA (semi-automatic) EB 500, Pneumatic workpiece clamping, Oil collecting pan, Electrostatic mist extractor., Traverse X-axis: 450 mm, X axis travel: 450 mm, Z-axis travel: 250 mm, X-axis resolution: 0.001 mm, X axis resolution: 0.001 mm, Z-axis resolution: 0.001 mm, Resolution Z axis: 0.001 mm, Resolution C-Ache: 0.001°, X-axis rapid traverse: 15 ...
used
used
Reduction 6:1
REINTJES WAF 740 3.55:1
used
Underscore 5,158:1
used
For sale: REINTJES Marine gearbox WAF 560 Reduction: 5,947:1 Built 1992 The gearbox is in very good condition, always stored in facility with climate control. Price is Ex Works - The Netherlands. In case you need we can arrange the transport with very interesting rates. if you need further assistance or information please e-mail us: info@amp-power.nl Pictures available on request
used
Transmission oil cooler (recon) various
Slow runner with sliding floor 800 mm rotor width 11 kw motor good condition