used DROOP REIN Vertical Knee Type Milling Machines

Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T

x-travel:2300 mm y-travel:1200 mm z-travel:950 mm feed::max. 4000 mm/min spindle turning speed range:31,5 - 1.600 1/min spindle taper:SK 50 spindle drive:30 kW milling head -swivable +/-:45 ° distance spindle /table:max. 1200 mm table surface area:3000 (4200) x 1200 mm table load capacity:10000 kg Control:TNC 426 HEIDENHAIN weight of the machine ca.:38 t CNC milling machine, from 2008 with HEIDENHAIN TNC 426 control, in 2022 overhauled, 2 pcs. workbenches 2 pcs. tool cabinet lot of tools (around 140 pcs.), el. handwheel approx. 69.000h "machine on, 18.500h "spindle on" very good condition, under power in factory

x-travel: 2000 mm y-travel: 1000 mm z-travel: 800 mm spindle turning speed range: 4 Stufen von spindle turning speed range: 20 - 3150 U/min spindle taper: SK 60 + SK 50 milling head -swivable +/-: 45 ° copying travel - horizontal/cross: 300 mm copying travel face: 200 mm distance spindle /table: 200 bis 1000 mm distance spindle center to column: 1120 mm table surface area: 4400 x 1000 mm table load capacity: 8000 kp total power requirement: 30 kW weight of the machine ca.: 56 t dimensions of the machine ca.: 7,5 x 5,0 x 4,4 m Machine is in an excellent condition, continuously maintained by the manufacturer • Control D + R, extended with HSM • DROOP & REIN - copy control type kc • HF spindle TDM HK 12-02, 15000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, max. load: 6t, clamping surface: 220x800mm, controls: HEIDENHAIN Positip 850.

Table length: 3000 mm Table width: 1250 mm Longitudinal X: 2400 mm Cross Y: 1250 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 415 Make Droop Rein FSM Type FSM 1255 DA 30 kc N Year 1991 HeidenHain TNC 415 Table length (mm)L = 3.000 Table width (mm)W = 1.250 Longitudinal X (mm)X = 2.400 Cross Y (mm)Y = 1.250 Vertical Z (mm)Z = 1.000 130 / Bt50 / 3150 Rpm Copy attachmentAngle + / - 45 Gr Weight 47.500 Kg Power 30 kW  

FIXED BENCH MILLING MACHINE with SWIVEL VERTICAL HEAD and PRISMATIC GUIDES. Brand : DROOP & REIN.
 Model: FS130gku.
 Table: 2200 x 800 mm. Long crossbar : 1700 mm.
 Transverse crossbar : 870 mm.
 Vertical crossbar : 800 mm.
 Spindle taper : ISO 50. THE MACHINE IS EQUIPPED WITH A VIEWER.

Universal milling machine Ecomil 100 Heidenhain Control TNC 124 SK 50 56 shots with tools Spindle head swivel Quill extendable 700 x 2000 clamping area Control retrofitted. Feed continuously variable all axes Rapid traverses Length 3.20 m Width 2 m Height 3.50 m Weight 14 tons Spindle 20 - 1000 rpm T slots 22/42 min distance 140 mm

Vertical copying and milling machine Make: Droop & Rein Type: FSM 1255 DA 30 kf Year of construction: 1990 Commissioned: 1992 Control: Fidia CNC 11 Spindle Ø: 130 mm Spindle speeds: 80 – 3150 rpm Max. milling power: 30 kW Spindle bore: SK 50 Quill stroke: 200 mm Swivel: + / - 45° Travel: X-2400 mm Y: 1250 mm Z-1000 mm Feed range: 5 – 3000 mm/min Rapid traverse: 6 m/min Clamping surface: 3000 x 1250 mm Max. table load: 10 to Total power requirement:55 kW Space requirements: approx. 8500 x 5500 x 4500 mm Weight: approx. 47 tons

This Droop & Rein FS 130 SKE Vertical Machining center was manufactured in the year 1978. It is equipped with a HEIDENHAIN iTNC 426 control unit and has 3 axis. The machine has a spindle speed of 31.5 – 1600 rpm. The machine was completely overhauled in 2022. See information about overhauling details in PDF (DE) attached. Contact us at any time for further questions.

X/Y/Z: 3000 mm x 2000 mm x 1200 mm. Control unit : Siemens 840D 3 axis linear slide Machine can be seen in working condition

Vertical milling machine / metal milling machine; - travels x, y, z 1900x1020x1020 mm; - Table surface 2400 x 1000 mm; - Tool holder SK 50; - Spindle speeds 20-1000 rpm; - Spindle motor 26 kW; - Spindle diameter 130 mm; - with clamping table; -Abm. 1000x650 mm and tools; -Space requirement approx. 4.8 x 5.3 x 4 m.

x-travel: 3300 mm y-travel: 800 mm z-travel: 1100 mm tool adaptor: SK40 weight of the machine ca.: 28 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter:1400 mm x-travel:2200 mm y-travel:1200 mm z-travel:1100 mm c-axis:360.000 x 0,001 b-axis:+/- 60 ° w-axis:350 mm distance spindle center to column::1100 mm table load:6 t spindle drive:15 kW Torque:4600 nM spindle turning speed range:10 - 1600 U/min spindle taper ISO:50 no. of tools in the magazine:20 Stück total power requirement:45 kW weight of the machine ca.:30 t dimensions of the machine ca.:5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEMENS 840 D control for 6 axis - tool changer for 20 tools - spindle quill 350 mm as W-axis - rotary table as C-axis - angualar milling head indexable - oil cooler, chip conveyor, hand operating panel.

-Year of construction: 1965 ( Complete overhaul and conversion to CNC 2003 by Rottler for 750,000.00 Euro ); -Heidenhain LB 382 C length measuring system; -Accuracy = +/- 0.005 mm; -Portal passage approx. 2300 mm W x approx. 1300 mm H; -Dimensions of required floor space: -Height approx. 4,250 mm, width approx. 3,900 mm, length approx. 20,000 mm; -Specifications: -X-axis (movement: table to move horizontally); -Table - feed speed 0-5900 mm/min (1350 r/min); -Table - rapid traverse speed 0-5900 mm/min (1350 r/min); -Table - travel 8500 mm; -Table - feed force 161729 N (125 Nm); -Y1 / Y2 axis (headstock moving horizontally); -Headstock - feed speed 0-1515 mm/min; -Headstock - rapid traverse speed 5900 mm/min; -Headstock - travel 2100 mm; -Feed force 30000 N; -Z1 / Z2 axis (quill moving vertically); -quills - rapid traverse speed 420 mm/min; -quills - travel 400 mm;  ...

Lathe broaching machine -slotting machine , keyseating machine, slot broaching machine Rotary table, rotary indexing table, dividing head, dividing head Grooves: straight, ring, oval, spiral video available - Chuck diameter: O315 mm - Inner bore: O 98 mm - max. stroke: 250 mm - Rotating three-jaw chuck: grooving in bores (bushes) - standing three-jaw chuck: for grooves in bores (without freewheel) - slot broaching tool, - Dimensions: 1820/830 / H1310 mm - Weight: 1330 kg

floor-plate length: 4000 mm floor-plate width: 1600 mm floor-plate height: 300 mm T-slot - distance: 175 mm T-slot - width: 28/48 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4000x1600x250 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5300 mm y-travel: 2500 mm z-travel: 1200 mm angular milling head: Table load: 60000 kg column daylight: 2700 mm workpiece height max.: 1700 mm Table dimensions: 5000x2250 mm control: Heidenhain type: 430 : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 4000 mm y-travel: 2200 mm z-travel: 1500 mm : 270 mm spindle turning speed range: 20-2000 U/min Control: Heidenhain type: TNC530i table surface area: 3000x1600 mm table load: 40 t spindle taper ISO: 50 spindle motor: 50 kW T-slot - width: 28 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 3500 mm floor-plate width: 1600 mm floor-plate height: 180 mm T-slot - distance: 175 mm T-slot - width: 30/50 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4000x1600x250 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3300 mm y-travel: 2200 mm z-travel: 1300 mm w-axis: 350 mm workpiece height: 1700 mm milling spindle diameter: 140 mm diameter of quill: 230 mm milling head speed: 40-2000 U/min transmission ratio: 4 table surface area: 4260x2000 mm T-slot - distance: 175 mm T-slot - width: 28 mm number of T-slots: 11 workpiece weight: 300000 kg milling spindle motor: 30 kW Feed: 5-3000 mm/min control: Fidia total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/min Table area: 2300x1200 mm Spindle: 200 mm spindle stroke: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Nr 3762 Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 2000 mm z-travel: 1300 mm Control: Heindenhain type: TNC530i : table surface area: 5200x2000 mm Table load: 30000 kg pinole diameter: 230 mm number of T-slots: 11 T-slot - width: 28 mm T-slot - distance: 175 mm spindle taper ISO: 50 turning speeds: 40-2000 U/min spindle motor: 30 kW transmission ratio: 4 total power requirement: kW weight of the machine ca.: 70 t dimensions of the machine ca.: 10x5,5x5,8 m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5300 mm y-travel: 3300 mm z-travel: 1300 mm Table load: 50000 kg column daylight: 2600 mm workpiece height max.: 1700 mm Table dimensions: 5000x2000 mm control: Heidenhain type: ITNC530 : angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 920 mm z-travel: 1000 mm Control: total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: m Year of construction approx. 1970 X 8000mm Y 920mm Z 1000 mm Head rotates 180° Table Length 3600mm Width 920mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2400 mm y-travel: 2000 mm z-travel: 1450 mm table surface area: 5000 x 1400 mm spindle taper: SK 50 Control: Fidia C1 throat: 1500 mm with digital readout ball screw extensive toolings and accessories! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.