used DR COLLIN Extruders

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

Collin 3 zone Extruder 150degC max temperature with transformer

Calender with stretching line Roll width: 450 mm Diameter of roller: 252 mm Stretching line length: 2500 mm incl. 4 GWK temperature control units, 12 kW heating capacity

As good as new.

This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand : Collin Pilot & Lab Solutions – Fashion model : Coficos AIS – Construction year : 2007 – Working hours : NB

This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 230 V -Dimensions: 1200/560/H1250 mm -Weight: 133 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 V -Mechanics for: cutting jaws missing -Dimensions: 1100/700/H1130 mm -Weight: 132 kg

Tapping machine, pipe thread cutter -for pipe size: max. 2 inches -with: cutting jaws -Speed: rpm -Foot switch with emergency stop function Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1200/660/H1250 mm -Weight: 166 kg

Collin Heating Press for Forming Plastics Collin Heating Press 78 Tons for Forming Plastics / Prepregs for Carbon Parts / Composites Type: Press 500 P Plate press for plastics processing / polymeric materials / ceramic masses Pressing pressure approx. 78 tons Temperature range from 20° to 300°C Usable pressing area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

Pressing force: 1400t, press-out length flat: 1500-12,000mm, recipient 1: max block diameter: 185mm, max block length: 350mm, recipient 2: max block diameter: 150mm, max block length: 580mm, max. operating pressure: 240bar, connected load: 535kW, retrofit 2001 includes power increase to 1000t, new piston rods ground and chrome-plated. Operating pressure: 240bar, connected load: 535kW, year of construction is original 1915, retrofit 2001 includes power increase from 1000t to 1400t, new piston rods in ground and chrome-plated design, installation of a new shear, completely new mould slide, hydraulics: renewal of the control, regulating and safety valves. Completely new pipework, completely new control cabinet, control panel, length measuring system and control system (Siemens S7-300), with documentation, an on-site inspection is possible.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.

Barwell C3 Preformer Extruder 2500 psi Output 600kg/hour Ram type Extruder Extruder size 250mm With Rotary Cutter 8 fixed speeds Year 1980

Manufacturer: Paul Troester Maschinenfabrik/Hannover Year of construction: 1978, machine was in operation until the end of 2015 Screw diameter: 150 mm Length: 16 D (approx. 2,400 mm) Screw speed: 2.5-25 / 4 - 40 U/Min. Centre height of the extruder: 1,100 mm Type of gearbox 3 TH 990 K / 2s, 2 speeds. Gear ratio: = i1 16.5: 1 i2 = 26.4: 1 Maximum gearbox output torque: 45,000 nm Maximum permissible injection pressure: 350 bar without limitation through the extrusion head. The extruder will be overhauled and designed/changed according to customer's specification. Below pictures 1-4 show an extruder overhauled by us.

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

According to the description below

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

8" Cold Feed Rubber Extruder

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)