We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
CARTRIDGES FILTER MANUFACTURER: DONALDSON TORIT manufacturer: Original Donaldson Torit filter material: Extremist web original type: 262-5026 (Open available: 20 pieces of price: each 90.-? 262-5002 (lids) Available: 3 pieces of price: each 90.-? 262-5015 (Open available: 5 pieces of price: each 70.-? suitable for ray arrangements Ray cabin Lackieranlage plasma Absaugung etc.
used
Fine-sighting system for final finenesses of up to 3 microns, consisting of: product task, Acucut Safe C-24, dust filter Bühler PGFG 60/18 (39 m2 filter area, pressure shock-resistant, without fan), various dust lines and control cabinet. Previous use: toner production (power: 200 - 600 kg/h). Appendix revised in 1993, regularly maintained.
used
Ultra fine classifying line for end finenesses up to 3 micron, consisting of: Feeding unit, Acucut Mikro air classifier C-24, dust filter Bühler PGFG 60/18 (39 m² filtering surface, shock pressure proof, without blower), several tubes and switchgear cabinet. Prior use: Toner production (capacity: 200 - 600 kg/h). Line revised in 1993, regularly maintained.
used
Water Chiller DONALDSON ULTRAFILTER SL MODEL ULTRACOOL 0500 SP E6811024-20 Donaldson's Ultracool series water chillers combine high efficiency with low energy consumption, optimizing water use and ensuring process safety. The use of closed-loop water chillers allows water recirculation and ensures the preset optimum temperature. The Ultracool carries the water to the heat exchanger, where a separate cooling circuit cools it. An item that has been used previously. Practically unused. It is fully operational and works as intended. Brand: Donaldson. Product in Stock. Get a shipping and tax estimate by adding the item to your shopping cart. The estimated delivery time will depend on the choiceed shipping service and the receipt of the compensated payment. Delivery times may vary Payment We accept PayPal and all major credit cards. TESTED.: YES In case of malfunction; You h ...
used
Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter Ultrafiltration System for Air Compressor Condensate Oil/Water Separator for Compressed Air Condensate ● Treatment plant for the separation of compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water ● Intelligent control concept with programmable control for safe plant operation, incl. plain text display via text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection ● Optimized cleaning by comparing input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection wi ...
used
Type: C30-3K11 7,5 kW buisdia: 280 mm
used
Type: C30-3K11 7,5 kW buisdia: 280 mm
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 4DF 16 EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture : 1997 Voltage: 3x 400V Power : 15kW Frequency : 50Hz Capacity : Unknown Dimensions can be measured if necessary.
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: Unknown Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture: Unknown Voltage : Unknown Power : 18,5kW Frequency : 50Hz Capacity : 3.33 m³/s approx. 20.000m³/h The plants are all dismantled and stored on pallets
Capacity (x): 0 Process Application: 0 Other Info: 0
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Voltage 50 Hz 3x: 400 Volt Installed power: 1.1 kW Weight: 75 kg Dimensions: Length: 1100 mm Width: 650 mm Height: 900 mm
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Voltage 50 Hz 3x: 400 Volt Installed power: 1.1 kW Weight: 75 kg Dimensions: Length: 1100 mm Width: 650 mm Height: 900 mm
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Voltage 50 Hz 3x: 400 Volt Installed power: 1.1 kW Weight: 75 kg Dimensions: Length: 1100 mm Width: 650 mm Height: 900 mm
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Aspirated air: 500 m3/min Voltage 50 Hz 3x: 400 Volt Installed power: 0.75 kW Weight: 39 kg Dimensions: Length: 800 mm Width: 500 mm Height: 550 mm
used
Capacity (x): 0 Process Application: 0 Other Info: 0 Technical data Aspirated air: 500 m3/min Voltage 50 Hz 3x: 400 Volt Installed power: 0.75 kW Weight: 39 kg Dimensions: Length: 800 mm Width: 500 mm Height: 550 mm
used
Pressure: 16 bar Motor: 0,22 kW Free air delivery: 1,08 m³/min Measurement (WxHxD): 360 x 645 x 410 Weight: 31 kg Compressed air connection: 1/2
used
Power: 11kW, rotational speed: 1450/min.
used
Cartridge filters, among other things, for the filtering of paint dusts Manufacturer: Donaldson Torrit Type: DFT-18 Year of construction: 2004 Volume flow: 3.33 m³/s; 12,000 m³/h Power consumption: 11 kW Weight: 1.175 kg Fan: from 1980 (see nameplate)
used
Cartridge filters, among other things, for the filtering of steel dusts Manufacturer: Donaldson Torit Type: TDS 20 Year of construction: 2005 Power consumption fan: 22 kW Volume flow: 18,000 m³/h Pressing: 2,550 Pa Weight: 1,800 kg Construction: Robust filter housing made of 3 and 4 mm sheet steel Special features: Upstream cyclone made of Hardox sheet metal, downstream police filter system, various pipes and screws
used
Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much.
used
air flow quantity: . m³/h suction power: . kPa power capacity: 2,2 kW Sweat extractionThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of construction: 1995 Voltage : 660 V Power : 4 kW Frequency : 50Hz Capacity : Unknown
used
Inv. Num. : 6824 Type: DCE DEPRO 16 Producer: Donaldson Created: 2005 Parameters: Number of filter elements: 16 Filter Area: 282.4 m2 Machine dimensions: 3205 x 2100 x 1500 mm
used
Donaldson UMA72G1 Dust extractor Serial: 18062460 2019, designed to maximize dust collection, compact design and quiet operation, 0.75Kw, 3Ph