used DIEFFENBACHER Friction Spindle Presses

Capazitat 300 Tone Table size 1,500 x 1,500 mm Stosselv creation 500 - 1,000 mm Piston x 400 mm Delete. Table - Stossel Minimum: 500 mm Maximum: 1,500 mm Machine height 4,000 mm Bottom of the floor 1,000 mm Top of the floor 3,000 mm Machine Weight 18.600 kg

Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation.

pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2000 /1000* t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a d ...

pressure:1000 t distance between columns:3030 mm stroke:350 mm Distance table/ram, max. stroke up, adjustment up:1400 mm table surface area:3000 x 2000 mm table height over floor:430 mm side window:1450 x 1400 mm ram surface:3000 x 2000 mm speed down:300 mm/s speed up:340 mm/s working speed:18 - 44 mm/s return capacity:120 t oil volume:4400 l width with platform:4950 mm power capacity:2 x 90,0 + 10,0 kW weight:87,0 t Dimensions (WxDxH):4,35 x 3,65 x 7,55 m height over floor:6,05 m height beneath floor:1,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:500 t distance between columns:1910 mm stroke:500 mm Distance table/ram, max. stroke up, adjustment up:700 mm table surfache without cutting impact cushions:1910 x 1360 mm table surfache with cutting impact cushions:1600 x 1360 mm table height over floor:800 mm ram surface:1600 x 1270 mm Side window:600 mm speed down:400 mm/s speed up:330 mm/s working speed:10 - 28 mm/s oil volume:1200 l power requirement:60,0 kW weight:40,0 t Dimensions (WxDxH):3,6 x 2,5 x 5,0 m height over floor:4,5 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 cutting impact cushioning:hydraulic ram interlocking:hydraulic

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

Compressive force: 170 t Spindle Ø: 160 mm Table support surface: 700 x 900 mm Plunger area: 500 x 800 mm Gr. Distance between table and plunger: 450 mm Drive motor: 380 V, 11 kW Weight: 8200 kg

Technical data Screw diameter: 125 mm Pressure: 100 to Table surface: width: 400 mm depth: 400 mm Passage between guideways: 400 mm Max. distance from table to slide: 400 mm Slide stroke: 240 mm Drive motor power: 7.5 HP Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 2900 mm

Technical data Screw diameter: 125 mm Pressure: 100 to Table surface: width: 400 mm depth: 400 mm Passage between guideways: 400 mm Max. distance from table to slide: 400 mm Slide stroke: 240 mm Drive motor power: 7.5 HP Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 2900 mm

Technical data Screw diameter: 45 mm Pressure: ca 4 to Execution: Double column Table size: Length: 150 mm Width: 110 mm Slide stroke: 45 mm Distances: table to slide: 95 - 135 mm between the columns: 120 mm Overall dimensions machine: Length: 650 mm Width: 530 mm Height: 1350 mm

press capacity: 250 t spindle diameter: 160 mm ram stroke range: 180 mm stroke speed: 71 Hub/min column daylight: 450 mm table surface area: 560x450 mm ram surface: 450x400 mm total power requirement: 12 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FRICTION WASHING MASHINE Electric power 7,5 kW In good condition

width 30 cm age 2007 1 friction feeder max. 1.000 cycles / h (neutral running) mobile sub-frame Delivery time: immediately from stock Ref: PO200024A Please ask for price. We ship and install worldwide!

Friction feeder brand ANKUCH model ASB. This feeder is synchronized with the speed of the machine conveyor Energy: 430v/tri plus pneumatic supply at 6 bars Machine speed: max. 240 products/min Use format: product length  maxi 200 mins / min 35 mins product width maxi 110 mins Parts recently changed: welding jaw resistors, electric rotating joint, temperature regulator, power contactor for the heating resistors. Stock of new parts: Electric rotating joint Stock of spare parts: numerous used parts plus a complete feeder little used Number of shapers (format change) =>10 shapers Machine year: 1997 Last intervention by the manufacturer on the machine: Oct 2012 Machine equipped with option: an automatic friction feeder. (Automatic distribution of cards) Documentation: user manuals and spare parts for the friction feeder and for the aucotronic plus mechanical and electrical  ...

There are two identical machines available, weight: 92kg.

Fast and efficient machine. The machine is a perfect solution especially for hardwood processors up to a maximum height of about 35 mm, who want to achieve maximum material yield and high work efficiency. Technical parameters: Power of the main motor: 2 x 3 kW or 2 x 4 kW Shaft extension possible: 120 mm Feed belt width: 400 mm Power of the feed motor: 0.55 kW Tool diameter: 300 mm Maximum material height : 35 mm ( change on request ) Minimum material length: on request Small compact cutting sawing machine. The machine is suitable for cutting material with low energy consumption. Individual parameters can be changed on request. KuSING has been manufacturing woodworking machines since 1991.

TECHNICAL SPECIFICATIONS Manufacturer: ROHR GmbH Designation: friction drum Type: Hurricane HS-5 Year of construction: 2001 Throughput: 50 - 100 t/h Drive power rotor outside: 55 kW Drive power rotor inside: 90 - 132 kW Drum diameter: 1,800 mm Drum length: 3,100 mm Weight: 20.500 kg SPECIFIC COMMENT - For polishing, grinding, cleaning and rounding aggregate

TECHNICAL SPECIFICATIONS Manufacturer: ROHR GmbH Designation: friction drum Type: Hurricane HS-5 Year of construction: 2000 Throughput: 50 - 100 t/h Drive power rotor outside: 55 kW Drive power rotor inside: 90 - 132 kW Drum diameter: 1,800 mm Drum length: 3,100 mm Weight: 20.410 kg SPECIFIC COMMENT - For polishing, grinding, cleaning and rounding aggregate

Squeezer 300 (screw press with integrated shredder) – used after renovation - 18.5 Kw main screw motor - screw diameter Ø 280mm - screw speed 1450 rpm - Hydraulic station with pump 1.5 Kw - shredder – rotational speed 83rpm - main motor 15 KW - capacity 250 kg/h

Magnetic clutch, electromagnet friction disc clutch VEM Dessau KE 0,63 ( KE0,63 ) New ! Ø 18 mm 1 Nut

• For feeding of brochures etc. • Speed of friction straps max. 240 m/min • Width of product max. 650 mm • Length of product min. 165 mm • Height of magazin appr. 700 mm • Speed adjustable • Quantity control • Frequency controler Danfoss • Servocontroler Elau PacDrive MC-4 • 230 VAC/50Hz/3A Friction Feeder without control (PLC), must be integrated into a machine control system (PLC), or must equipped with a separate control system. We can offer this work on request.

• For feeding of brochures etc. • Speed of friction straps max. 240 m/min • Width of product max. 650 mm • Length of product min. 165 mm • Height of magazin appr. 700 mm • Speed adjustable • Quantity control • Frequency controler Danfoss • Servocontroler Elau PacDrive MC-4 • 230 VAC/50Hz/3A Friction Feeder without control (PLC), must be integrated into a machine control system (PLC), or must equipped with a separate control system. We can offer this work on request.

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz