used BUEHLER Laboratory shakers

High-quality machine for cleaning and separation of finished products such as semolina and vapors of hard and soft wheat, or as a prerequisite for the production of non-slip flours. Bühler Type MQRE. Good condition and ready for use. During overhaul, the actuator is newly stored and all seals replaced. Filter cloths, brushes and both front derailleur to be replaced. Newly painted on request.

Impact pin detacher BÜHLER MJZE 43 4,0 kw ATEX confirmed New bearings and good bushings We have different machines of type BÜHLER MJZE 43 in stock. Just ask for our offers!

Bühler Entoleter MJZG 51 D, Fabrication-Nr. 10256498 Includes Frame für standing mount Sockets and wear rings in good condition rinse with compressed air no magnet valve

Used Bühler grain sifter. One deck. Very good condition.

Used pelletising machine Bühler model DPAS-660/228. New 1999. Power 200 kW. Additionall several dies. Documentation available.

Flour scales BÜHLER MWBL-EE in various sizes from 60 to 170 The precise electronic weighing system for in-house product control. Continuous scales for actual weight recording. Weighing capacity from 0.1 to 50 m³/h. In the case of flour, this corresponds to an output of up to 23 t/h. Control Sumtronic II MWEE Modernization of the control system on MEAG possible. If required, with dosing cell wheel. The systems can also be used for other bulk materials. Simply enquire and explain your requirements to our expert consultants. We will work with you to find a cost-effective solution.

Used fluid bed dryer mady by Bühler model OTWG-90, new 1995. Technical data: - Weight 850 kg - Content m³: 1.5 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

Heidolph Polymax 1040 with incubator 1000 and high incubation hood. Offered here is the platform shaker with tumbling movement with temperature-controllable, high incubation hood. It is a package of the following devices: - Polymax 1040 - tumbling platform shaker with 2 - 50rpm, continuous operation and timer function (max 120min) - Incubator 1000 - nominal temp display, actual temp display, adjustable temperature up to 65°C - Incubator hood, high The Polymax has a single-sided, dismountable and completely removable attachment, consisting of two vertical, screwed anchor pins and a height-adjustable, padded grab bar. The incubator hood is damaged at the left, front corner. An edged aluminum plate was glued over the damaged area and screwed into the floor. This repair is professional and not a backyard screw. I am happy to send detailed photos. The device can be vi ...

Used shaking incubator, New Brunswick Scientific Innova 4300, serial no: 20104564, MFG no.: M1193-0002 The New Brunswick Scientific Innova 4300 Large Capacity Incubator Shaker is designed for handling greater quantities of flasks. It easily holds (12) 2 L flasks and accepts flasks up to 6 L. The Innova 4300 shaker incorporates a triple eccentric counterbalanced drive to provide horizontal plane rotary motion in a 1 in. (25.4 mm) circular orbit. A Proportional/Integral (PI) Microprocessor controller with instantaneous digital feedback controls the speed over a range of 25-500 RPM. It also provides temperature control over a range of 5°C above ambient to 60°C. The internal chamber is 34¾ inches (88.3 cm) wide, 22¼ inches (56.6 cm) deep, 19¼ inches (48.9 cm) above the platform and will accept flasks up to 6 liters. It is equipped with a foot-pedal lid lift. The shaker may be opera ...

#5000 VIBRATION FEEDER Manufacturer:AEG Vibrationstechnik Type: 0A 1500/900 - MVE 50-4 Electrical power: 400 V Size: 1440 x 1600 x 1080 mm Through size: 890 x 1260 x 220 mm Weight: 158 kg

Vibrating screen from Sweco Power : 1,5kW Voltage : 220V Protection : IP 55 Amperage : 6,9A

Vibratory sieve Power : 22 kW Voltage : 400V /230V 50Hz rpm : 920 Capacity : Unknown

Laboratory balances, precision balances NAGEMA, WEIGHING TECHNOLOGY RAPIDO OWA LABOR Type: 34.011 0.5 - 160 g 138 62 295 TGL 28619 IP30 used, tested !! Dimensions: 350 x 270 x 260 mm

Manufacturer : Sidel Model: 99000863608   Power supply: 220 V Cutting capacity: ? 60 - 160 mm Maximum length 400 mm Maximum number of simultaneous cuts: 4

Manufacturer : Cotuplas Model: S4 Type : Manual sealer for plastic tubes Applications Production of samples for demonstration Market research Production of tubes for small or medium production runs Laboratory testing, internal product compatibility Features S4 unit accepts tubes from 13.5 mm to 60 mm in diameter and up to 230 mm in length Manual production speed of up to 240 tubes per hour Adjustable timer from 0 to 30 seconds to meet sealing requirements The tube is positioned between the sealing jaws by the operator Tube positioning device ensures process repeatability and seal quality (missing parts, planned installation) 3.5 mm high jaws maintain pressure while sealing Spring-loaded jaws open effortlessly with a lever Consumption water : 100 L / h electrical : 400 W

Manufacturer: VWR VWR Model: INCU-Line 68R Type : Refrigerated incubators Temperature stability (time) (?C) ?0.1 at 37 ?C Temperature uniformity (?C) ?0.3 at 37 ?C Capacity 68 L Temperature range +3...70 ?C Type of convection: Forced convection Maximum chamber capacity 20 kg W?D?H int. 470?300?430 mm W?D?H ext. 570?680?600 mm Power rating (W) 250 Weight 41 kg Maximum load per shelf (kg) 10

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Laboratory press with 11 vertically arranged casting plates (each 260 mm x 250 mm), with hydraulic pump and motor 0.5 kW, oil reservoir, drain tray and drain valve. Tower can be moved forward; Cloths should be renewed.

Laboratory press with 11 vertically aligned plates (260 mm x 250 mm each), with hydraulics pump and drive 0,5 kW, oil reservoir, outlet tray and drain cock. Fabrics need to be replaced.

Drive: 1.5 KW Volume: 10 ltr. Max pressure: 5 bar Mixer: Ploughshares Machine with double jacket, heating mini bar, Max. Working temperature: 158 ° C; cutting blade Assembly, drive: 1,1 KW.

Laboratory Candy pulling machine Application Sugar Pulling, Available 1 Kg, 2Kg & 5 Kg up to 50 Kg, the size of the engine is dependent on the size of the machine The action of the machine is derived from two driven arms rotating independently around a single fixed arm. The machine has one speed and pulling time can be set by means of a timer. The teflon arms are removable. This option is unique to this machine. It allows an easy cleaning. Safety guard automatic stopping with motor and starter Sugar Pulling Machine is mainly to aerated products like Chewy Toffees and others. This machine just stretch the gelatine based sugar mass and work air inside the batch. That avoid stickiness of the chewy Toffee at the teeth and give the product a spongee texture. The Machine is made for Laboratory trials and works batchwise, the product touching parts are made from stainless steel or te ...

No.: 3164 Year of construction: 2001 Type of current. 400V vacuum pump, double jacket Electric heating adjustable Homogenizer adjustable Schauglass, perfume funnel in Rezleitung and cover etc. Mobile frame, control cabinet Dimensions: LWH = 800x1000x1650mm

Attachment: Chamber filter press, laboratory press Usage area: Chamber filter press, pilot plant Design: page Holm led Type: XMS150-15 U Filter plate format: 150 x 150 mm Number of plates: 4 + 1/2 head and end plate Filter plates: PP Thickness: 15 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 0.2 m ² Presses contents: approx. dm3 PCB package length: mm Filter pressure: 15 PSI Plate transport: manually Pump technology: included - optional Type: centrifugal pump Type: CHL2-20 Buying or renting: Visit the facilities in consultation with us to work. Condition: demonstration plant, near Mint Photo: a construction-like setting Weight: approx. 70 kg length 70 cm: Width: approx 40 cm Height: With stand + pump approx. 85cm

MTI P-10 laboratory mixer The laboratory mixer is suitable for mixing, homogenizing, dispersing and suspending of low-to high-viscosity products, heated, pressure and vacuum resistant Heating cooling jacket 5 bar Product space-1 / 0.75 bar Tank 15 l, Volume 11 litres. The machine includes two containers heated, presses a vacuum pump and a dispensing device to high-viscosity products from the mixing container. The documentation is available.