We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Power: 1.5 Nm -Speed: 0-500 rpm -Shaft: Ø 19 x 30 mm -Construction: B5 -Dimensions: 230/230/H200 mm -Weight: 10.5 kg
used
Electric motor BROOK CROMPTON Type: D160 LD ( D160LD ) Engine power 15 kW Speed : 1460 rpm Voltage: 220/ 380V eddy current coupling: 180 CD4/2 Power: 12.3 kW Speed: 1275 rpm 90V, 3.3 Ad.C. protection class: IP23 PYE Dimensions: 1040x450x500 mm
used
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2850 rpm -Shaft: Ø 19 x 100 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 355/200/H220 mm -Weight: 12.5 kg
used
new, unused Right Angle Shaft Double Stage Reduction Horizontal rotating NE23BRN4 N (reducer with series N compact housing solid shaft) E (Size E) 2 (Double Stage Reduction) 3 (with right angle horizontal shafts) BRN (indicates the assembly arrangement shaft arrangement) 4 (nominal ratio) 71 kW n1 750 u/min n2 187,5 u/min
used
EDM machine - X: 500 mm - Y: 295 mm - Z: 385 mm - C-axis: 360° - Clamping area: 780 x 500 mm - Spacing table - Pinole: 285 - 660 mm - Workpiece weight: 1200 kg - max travel speed X,Y,Z: 600 mm/min - Clamping system: EROWA - C-axis measurement resolution: 0.001° - Electrode changer: 16 -fold - Electrode changer: pick-up - Electrode weight: C-axis 20 kg - max. single electrode weight: 5 kg - Electrode changer total load: 40 kg - Dielectric cooler - Dielectric filter candles: 3 pieces - Dielectric filling height: 345 mm - Dielectric capacity: 450 l - Dielectric aggregate: separate - Generator: 30 A A - Control: EROCOM 200 - Fire extinguishing system - Total power: 8 kW - Machine weight: 4400 kg - Space requirement (W x D x H): 2.2 x 3.3 x 2.4 m - Condition: very good Details tested by Maho technicians, ready for demonstration under electricity, instru ...
used
Mains voltage: 380V, connected load: 13kW, controls: Heidenhain TNC 125, the machine is in very good condition.
used
X-travel: 300mm, y-travel: 150mm, z-travel: 200mm, table dimensions: 350x450mm, controls: EROPULS 2002, length: 1200mm, width: 1200mm, height: 2000mm, weight: 1.4t, including documentation, without magnet clamping plate.
used
Gearboxes, spur gear units used HANSEN Type: RLF41-BNVH-12 Translation i: 111 Shafts approx. Ø 45 / 165 mm Dimensions: approx. 1200 x 750 x 670 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Gearboxes, spur gear units used HANSEN Type: D753CT Translation i: 453 Shafts approx. Ø 38 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Gearboxes, spur gear units used HANSEN Type: D743CT3 Translation i: 203 Shafts approx. Ø 50 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Key data: 730 mm, 630 mm, 12 A
Made in Germany X-axis 525 mm Y-axis 400 mm Z-axis 375 mm Dielectric tank 400 L Machine dimension; W 2100 x D 2450 x H 2600 mm Weight: 4800 KG Work table: L 730 x W 630 mm Operating voltage 400 V - 50 Hz Current consumption 12 A Control voltage 230 AC/ 24 DC Back-up fuse: 25 A Moto software is missing Price basis: free loading
used
Description: Serial number: 60318 Technical data (without guarantee): Table size X x Y: 600 x 400 mm Color path X x Y: 350 x 250 mm Z: 340 mm Workpiece height: max. 240 mm Table quill: max. 520 mm Generator: 20 - 120 A With accessories including EROWA electrode holders (approx. 28 pieces) as shown in the pictures and technical documentation as shown in the pictures weight approx.: 3,900 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,700 x 2,100 mm
used
AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de
10 pieces of engine with gear without generator and starter construction year 1990 - in 1998 Nissan Primera, Almera, Sunny, Micra, Blubird parcel price
used
SEW-motors with gearbox v. 1, 5kW - 15kW.Die engines have been used mint condition and never.Visits by appointment at any time.
used
E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.
used
E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.
new
3 Phase brushless servomotor Never used! For all technical data please see pictures
used
Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.
used
Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520
used
2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm
used
2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm
used
DATA ON THE MACHINE Machine type: Permanent magnet - DC servo motor Manufacturer: INDRAMAT Model: MDC 10.40C / MMA-0 / S06 Condition: ready for use (used) Price 550 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MAH-1119-9 Description We offer you a used DC servo motor from the manufacturer Indramat suitable for e.g. MAHO MH700 X or Y axis Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!
Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM
used
Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.