used ARBOGA H Frame Eccentric Presses

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg

Heavy gear box column drilling machine make ARBOGA type GSMH 4508Fabr. -No: 15641Technical specifications:Spindle mount: MK 4Drilling capacity in steel: 45 mmTable size: 430 x 615 mmProjection: 365 mmSpindle stroke: 195 mm4 automat. Feed rates: 0.10-0.408 spindle speeds: 63 - 800 rpmDrive power: 3.3 / 2.2 kWExternal dimensions L x W x H: 730 x 1040 x 2640 mmWeight: 1026 kgwith- Thread cutting device- coolant pump (without container)usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data: -Drilling capacity in steel ST 60 25 mm -Spindle mount MT 3 8 spindle speed 100 2700 RPM - spindle stroke 130 mm -4 feeds 0.1-0.3 m / U -RADIUS 270 mm -Column diameter 115 mm -Boring Unit + table height adjustable with hand crank on rack -Table dimensions 350 mm -Drive: 400 V / 0.8 / 1.1 kW -Space requirement approx. B H 800 x 1850 X 900 mm -Weight approx. 250 kg

Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Machine No.: 311615 Type: U1 Volt: 380V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 310 kg

Machine No.: 306916 Type: U1 Combi Volts: 380 V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 760 kg

Machine Type: Radial Drilling Machine Manufacturer: ARBOGA Model: ER 830 Year of construction: 1975 Condition: good Offer Type: Used Machine Specifications: Drilling diameter: 35 mm Drilling depth: 175 mm Speed range: 80 – 890 rpm. Spindle mount: MK4 Projection: 1060 mm Propulsion: 1.1 / 1.4 kW Remark: automatic feed tapping device, dice table, coolant device, heavy drill vice, 4 machine feet, quick-release chucks, Storage table Weight: 1500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Description: Mounting: MK 3 Drilling capacity (steel): 30 mm Drilling capacity (cast iron): 35 mm Thread cutting: max. M 24 Quill stroke: 200 mm Spindle speed: 100 - 3200 rpm Projection: 320 mm Travel distances: X-axis:450 mm Y-axis: 250 mm Drive power: 2 kW Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 2,300 mm, weight approx.: 600 kg

: gebraucht : 3985 : prompt, Zwischenverkauf v : Schweden : 1800 € : 1 : 25 mm : MK 3 : 235 mm : 100 - 2080 (8) U/min : 0,48 / 0,66 kW : 750 mm : 900 mm : 1550 mm Quill travel by handwheel Height adjustable and swiveling drilling head Cross table with manual feed in X and Y axes Does not comply with the German UVV and Austrian AMVO no operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mechanical Press brand Agostino Colombo ton 200 model Paride 2 dimension table 1400 x 1200 mm simension slide 1400 x 1200 mm stroke par minute nr. 20 slide stroke 457 mm . machine in excellent working condition

HAULICK HPV 75 Eccentric Press Maximum pressing force 75 t Bottom working table 640x540 mm Maximum number of strokes per minute (manual work) 50 spm Maximum number of strokes per minute (automatic work) 270 spm Min. length of the slider stroke 7 mm Max. length of the slider stroke 78 mm Certified by SCHULER 04.08.2012

RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg

Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request

Tech. Data Nominal press force 1000 kN at maximum stroke adjustment - commute 6.5 mm 1250 kN at maximum stroke adjustment - commute 3.5 mm Strokes with endurance 125/83/63 Hube/min Usable stroke rate 50 50 38 / min. Throat depth 320 mm, clamp 380 mm Stroke adjustment 10-120 mm, Stosselverstellung 80 mm Stosselflaeche 800 x 320 mm, recording journal 50 / 85 Tabletop table top hole, 900 x 630 mm 230 mm, Durchfalloch in the table 300 / 400 x 250 mm Drive - 7,5 / 5,5 kW Bulk 1350 x 2080 x 2780 mm, Btto 8900 kg

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make WEINGARTEN type ARV 63Order number. 121101, built in 1971Technical specifications:Pressing force: 63 tgr. sheet thickness: 10 mmDischarge: 270 mmTable: 760 x 480 mmDiarrhea hole in the table: 250 x 150 mmNumber of strokes: 56 and 84 / mingr. distance table - ram: 500 mmkl. Distance table - ram: 200 mmRam stroke: 8 - 100 mmRam adjustment: 63 mmExternal dimensions L x W x H: 900 x 2000 x 2600 mmWeight approx: 4 tonsWith- UVV for inlays- EMERGENCY STOP SWITCHused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press MABU type 12 TFprobably built in 1984Technical specifications:Pressing force: 12 tStroke adjustment: 6 - 60 mmTable size: 380 x 270 mmDiarrhea: 100 mmBear size: 120 x 100 mmInstallation height: 210 mmThroat: 145 mmDrive power: 1.1 kWExternal dimensions approx: 800 x 900 x 1750 mmWith- pneum. Friction clutch Control BA 1.1 for with / without movable protection Movable security not available!- height adjustable table- foot switch- stroke counterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools