used AMADA Vertical Band Sawing Machines

Height under guides: 90 mm Throat: 0 mm Table length: 400 mm Table width: 400 mm Make  Amada HA 4 Type HA 400 Year 1982 Bandsaw automat Capacity round max. diam.Cap = 400 x 400 Angle degrees max.Speed = 15 - 90M Type machine: Vert./Hor.Power 5.5 kW Workpiece height (mm) Chip conveyor Workpiece width (mm)Load = 2500 kg Capacity rectangle (mm) 90 Gr. Cutting Capacity square (mm)Bundel clamp* Managing the cycle of automatic travel included various lengths in the same quantity cycle * Control of pressure and cutting speed * Pressure regulation of vice clamping * Screw chip conveyor * Coolant system  

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Band length: 3505 mm Band width: 25 mm Sheet thickness: 0.95 mm Voltage 50 Hz 3x: 380 Volt Power: 2.2 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 2000 mm Width: 1900 mm Height: 1400 mm

Automatic band saw Manufacturing year: 1988 Automatic feed max stroke: 5400 mm Hydraulic blade tension Cut counter Variable speed: 15-120 m / min Chip conveyor Documentation

Automatic band saw Manufacturing year: 1988 Automatic feed max stroke: 5400 mm Hydraulic blade tension Cut counter Variable speed: 15-120 m / min Chip conveyor Documentation

Max. cutting diameter: 250mm.

Fully automatic horizontal band saw machine make AMADA type HA 250Machine -No: 461216 built in 1990Technical specifications:Saw range around: 250 mmSawing area flat: 175 x 300 mmSaw band thickness / width / length: 0.95 / 25 / 3505 mmSaw blade: 3505 x 25 x 0.95 mminfinitely variable belt speed: 27-40-54-68-80 m/minautomatic feed : 0 - 800 mmElectric drive saw band/hydraulic: 2.2 / 0.75 kWWeight approx.: 1200 kgused, not functional as a spare parts donorPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal band saw blade, band saw blade, metal saw band -Metal saw band: SG 2/3P x 0.9 unused -Length: 4115 mm -Weight: 1.2 kg

Clamping device table band saw, wood band saw, firewood saw, automatic band saw, material positioning, band saw rolls, band saw roll -Band saw roll: made of Amada HA-400 W metal saw -Diameter: 595 mm -Shaft: Ø 50 x 70 mm -Recording: M16 x 2 -Dimensions: Ø 595 x 193 mm -Weight: 51 kg

feed length: 0-800 mm : : Max. 250mm Schnitt automatic: weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2000 x 1750 x 1350 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, semi-automatic, band saw machine, horizontal band saw machine -Manufacturer: AMADA, horizontal band saw automatic band saw type HK-800 -Equipment: driven roller conveyor, stop system, -Saw drive: 5.5 kW -Cutting capacity flat: 90° 810 x 580 mm / 45° mm -Cutting capacity round: 90° 580 mm / 45° mm -Saw band speed: infinitely adjustable -saw band: -Coolant device: cooling water -Setting dimensions: 22000 mm/2000/H2410 mm -Transport dimension: 13 loading meters -Weight: kg

Description: Serial number 44731012 , Cutting capacity round material diameter: 4006 mm , Square material cutting capacity: 400 x 400 mm , Maximum loading capacity of the machine: 2500 kg , maximum loading capacity of the roller conveyor: 2000 kg/m Minimum remaining workpiece length to ensure the clamping wheel of 10 mm: 76 mm , Minimum workpiece width for detection: 30 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 9,000 x 2,400 x 2,000 mm

Description: Serial number 555123 minimum outside diameter of the workpiece 100 mm , maximum outer diameter of the workpiece 480 mm , maximum length of the workpiece 11.5 m total power requirement: 7,5 kW, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 12,000 x 4,000 x 2,700 mm

For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any  ...

Sheet metal deburring machine make AMADA type DB 610Machine -No: 61000917 built in 1989Technical specifications:Sheet thickness: 0.5 - 6 mmSheet width: max. 610 mmSanding roll dimensions: 630 x 200 mm2 grinding roller speeds: 1270 + 2030 rpm.2 cutting speeds: 18 + 13 m / sec.Passage speed: 2 m / min.Working table height: 780 mmDrive power: 3.7 kWOscillation drive: 0.4 kWConveyor belt drive: 0.2 kWWeight approx: 800 kgExternal dimensions approx .: 1660 x 1700 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table

This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.

This AMADA HFT50-20 (2007) Bending machine was manufactured in 2007 in France. It is equipped with a bending force of 50 tons and a bending length of 2085 mm. Distance between uprights is 2665 mm and the vertical stroke at 200 mm. The machine counter shows 8337 hours.

This AMADA EM2510NT Punching machine was manufactured in the year 2004.

3000 x 1500mm 4000w

Working hours machine: 61.000 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min

Power: 4 kW X - axis: 2520 mm Y - axis: 1550 mm Number laser heads: 0   CNC Brand: Fanuc CNC Model: 160i-L AMADA - LC 2415 A3 CNC Laser cutting machine 4kW 2500 x 1500 mm MACH - ID 6348 Make: AMADA Type: LC 2415 A3 Control: Fanuc 160i-L YOP: 2004 Hours: 11753 Working area X Axis    2.520 mm Working area Y Axis    1.550 mm Working area Z axis         300 mm Table Length          2.550 mm Table Width            1.550 mm Power resonator      4 kW kW / Amp Feed rate X-Axis      80,000 mm Feed rate Y-Axis      80,000 mm Feed rate Z-Axis      80,000 mm Sheet master loading arm     Yes Sheet tower storage        Yes Dust collector  ...

3000 x 1500mm / 4000w / Sheet Tower Automation