used AMADA Combination Machines

For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any  ...

Height under guides: 90 mm Throat: 0 mm Table length: 400 mm Table width: 400 mm Make  Amada HA 4 Type HA 400 Year 1982 Bandsaw automat Capacity round max. diam.Cap = 400 x 400 Angle degrees max.Speed = 15 - 90M Type machine: Vert./Hor.Power 5.5 kW Workpiece height (mm) Chip conveyor Workpiece width (mm)Load = 2500 kg Capacity rectangle (mm) 90 Gr. Cutting Capacity square (mm)Bundel clamp* Managing the cycle of automatic travel included various lengths in the same quantity cycle * Control of pressure and cutting speed * Pressure regulation of vice clamping * Screw chip conveyor * Coolant system  

Sheet metal deburring machine make AMADA type DB 610Machine -No: 61000917 built in 1989Technical specifications:Sheet thickness: 0.5 - 6 mmSheet width: max. 610 mmSanding roll dimensions: 630 x 200 mm2 grinding roller speeds: 1270 + 2030 rpm.2 cutting speeds: 18 + 13 m / sec.Passage speed: 2 m / min.Working table height: 780 mmDrive power: 3.7 kWOscillation drive: 0.4 kWConveyor belt drive: 0.2 kWWeight approx: 800 kgExternal dimensions approx .: 1660 x 1700 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet metal deburring machine make AMADA type DB 610Machine -No: 61000917 built in 1989Technical specifications:Sheet thickness: 0.5 - 6 mmSheet width: max. 610 mmSanding roll dimensions: 630 x 200 mm2 grinding roller speeds: 1270 + 2030 rpm.2 cutting speeds: 18 + 13 m / sec.Passage speed: 2 m / min.Working table height: 780 mmDrive power: 3.7 kWOscillation drive: 0.4 kWConveyor belt drive: 0.2 kWWeight approx: 800 kgExternal dimensions approx .: 1660 x 1700 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.

This AMADA HFT50-20 (2007) Bending machine was manufactured in 2007 in France. It is equipped with a bending force of 50 tons and a bending length of 2085 mm. Distance between uprights is 2665 mm and the vertical stroke at 200 mm. The machine counter shows 8337 hours.

This AMADA EM2510NT Punching machine was manufactured in the year 2004.

Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table

Working hours machine: 61.000 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min

3000 x 1500mm 4000w

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Band length: 3505 mm Band width: 25 mm Sheet thickness: 0.95 mm Voltage 50 Hz 3x: 380 Volt Power: 2.2 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 2000 mm Width: 1900 mm Height: 1400 mm

Power: 4 kW X - axis: 2520 mm Y - axis: 1550 mm Number laser heads: 0   CNC Brand: Fanuc CNC Model: 160i-L AMADA - LC 2415 A3 CNC Laser cutting machine 4kW 2500 x 1500 mm MACH - ID 6348 Make: AMADA Type: LC 2415 A3 Control: Fanuc 160i-L YOP: 2004 Hours: 11753 Working area X Axis    2.520 mm Working area Y Axis    1.550 mm Working area Z axis         300 mm Table Length          2.550 mm Table Width            1.550 mm Power resonator      4 kW kW / Amp Feed rate X-Axis      80,000 mm Feed rate Y-Axis      80,000 mm Feed rate Z-Axis      80,000 mm Sheet master loading arm     Yes Sheet tower storage        Yes Dust collector  ...

3000 x 1500mm / 4000w / Sheet Tower Automation

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

The machine has undergone a thorough inspection by an authorized AMADA service technician CNC laser cutting machine Amada LC3015 X1 NT 4KW with sheet metal magazine Year of construction: 2008 Type: Amada LC3015 X1 NT Laser power: 4kW Table: 3,000 x 1,500 mm Sheet metal magazine: Amada AS LUL 300X1 Cooler Ridel Donaldson Suction

1250 x 1250 with reposition 27 station with 3 index - Very good condition

Pressure: 0 t Sheet length: 150 mm Sheet width: 200 mm Positions ATC: 0   Minimum tool diameter 2 mm Maximum tool diameter 160 mm Maximum grinding depth 0.99/cycle Grinding rate 0.03 to 0.06 mm/Min Power 1.5 kW FAST, EASY AUTOMATIC TOOL GRINDING All punch press operators know how important tool maintenance is to part quality and tool life. Automatic tool can give a superior quality and process stability, considerably reducing maintenance times. TOGU-EU automatic tool sharpener has been specially designed for high quality sharpening of sheet metal tools. With fast and reliable sharpening of all standard tools, it allows their optimal repair and guarantees to always produce high quality parts. Unlike traditional grinding machines, the TOGU-EU range can minimise the amount of material removed during grinding, preventing the tool from overheating and extending its life time.  ...

We hereby sell a good AMADA laser cutting machine which is in very good condition. The laser machine is sold completely incl. software for programming, machine documents, water chiller, Extraction system and transformer. Specifications: Year of construction: 1998 Switch-on hours: 22.000h Laser Machine LC-2415 C2000 B / Model: LC2415 A2 Model: FANUC C2000 B Nominal laser power: 2000 WATT Max laser power: 2000 WATTS Laser wavelength: 10.6 μm Pulse width: 100μs-cw Steel diameter: >27mm Laser gas consumption: approx. 10l/h Laser protection class 4 Weight: 6.500 kg

AMADA EM 2510 NT Turret punching (year 2012) AC servo Direct twin drive Punching hours: 14271 h Machine on hours: 29580 h Excellent maintenance Punching force: 200 kN Work field: 1270 x 2500mm With replacement: 1270 x 5000mm Thickness max. of the material: 3.2mm ( ST-400N/mm2 ) Maximum material thickness: 3.2 mm. (brush table) Swan neck: 1,310mm Max weight of the piece: 50kg (F4) 150kg (F1) X-axis feedrate: 100m/min Y-axis feedrate: 80m/min Control: Amada AMNC-PC RS-232C serial interface Simultaneous axes speed: 128m/min Turret traverse speed (bidirectional): 30 1/min Max cadence punching with dies “VACUUM” (hit rate): 500/min (5mm stroke, 25.4mm pitch) 780/min (5mm stroke, 1mm pitch) 1800/min (1.4mm stroke, 0.5mm pitch) Stroke length: 36 mm. Punching accuracy: ±0.07mm* C axis speed: 60 rpm Stations: 45 of them 4 AMADEX Diameter max. tool: 114.3mm Tool cha ...

Laser power: 6 kW Oscillator: AF 6000 Positioning speed: 120 m / min Working area: 3070 x 1550 mm The principle of the laser: flying optics Cutting speed: 0 - 60 m / min. Cutting thickness: steel up to 25 mm, stainless steel up to 20 mm. Length - 9845 mm Width - 4245 mm Height - 2015 mm Weight - 11,000 kg.

100 ton x 3000mm 3i Graphic control 8 Axis With tooling

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

Key data: 20 t, 600 mm, 600 mm

We offer our reliable Amada Aries-222 punching machine for sale here. The machine is fully functional. The associated tool kit is complete and the machine is fully equipped.