used ALDINGER Spindle moulders

Sell an Adol Aldinger combi machine consisting of sliding table saw, side milling machine and slotted hole drilling machine.Footprint with unfolded table and stop extensions, width 2m; Depth 2.7m, height table top 1m The saw comes with a side, longitudinal stop and an angle ruler. The cross stop is about 1.5m, with the screwed-on extension. The max saw blade through, esser is about 400mm The shaft for the saw blade has a diameter of 30mm. The sliding carriage can be swept off and has a movement of 1.5m. The whole carriage can be moved in the slotted holes about 40cm. The height of the saw blade can be adjusted by means of a hand crank. The table can be tilted continuously by 45° by means of a crank. The side milling machine is equipped with 2 Spindl shafts. Diameter 30mm Length about 180mm and 140mm. The height of the slotted hole drilling agreggat can be adjusted. The table ...

Saw band length: 5280mm.

Surface planing machine make ALDINGER type HA 63Machine no .: KS 18/43117 built in 1960Planing width: 630 mmTable size: 2500 x 630 mmOutside dimensions: 2500 x 1200 x 900 mmused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Description: Machine number: 35364 With a combined circular table saw with a milling device and for slot drilling Table dimensions of the slot drilling device: 500 x 260 mm Table dimensions of the combined machine: 1000 x 820 mm Approx. Onsite Dimension. (l x w x h): 1,300 x 1,100 x 1,400 mm, weight approx.: 500 kg

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

Weibert WJ-F50 Table milling machine NEW Safety rulers in the shaper fence strongly ribbed cast iron table 1100x900mm electrical height adjustment 200 mm 5.5 KW R + L barrel 3000 to 10000 U/1 Control Panel top Milling spindle can be exchanged Tool - diameter When profiling 275mm at the tenoning 400 m stable role statement WJ-600600 K 4 Special price:

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Konturfrä�maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Table dimensions mm: 1000 x 900 With drive system

According to the PDF prospectus!

Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition

With feed and vacuum pump

--------------------

Machine type: Table milling machine Manufacturer: ELEKTRA BECKUM Model: TF 100 M 2.8 DN Built: 1998 Condition: ready for use Offer type: used machine Technical data: Table: 520 X 420 mm Speeds: 4000/6000/7500 rpm. Drive: 1.8 KW Comment: with an additional horizontal sawing unit (1.5 kW) for Two-sided machining with roller conveyor and lateral material guidance, everything can be easily dismantled Weight: 150 kg

Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options

Gebr. Table milling machine with cross-cut saws STEHLE F3E Table size: 117 x 86.5 cm Table height: 85.5 cm Milling machine: Motor power: 4 kW 2 milling spindles: 30 + 40 mm Height adjustment via handwheel Height adjustment range of the milling spindle: 115 mm Left- and clockwise rotation 4 speeds: 3.0 / 5.0 / 6.0 / 10,000 rpm. Doubling the speed via selector switch Crosscut saws: Engine power: 3 hp (2.2 kW) max. saw blade diameter: 350 mm max. cutting height: 110 mm Lateral adjustment range: 120 mm Sliding carriage incl. slotted hood (self-made) Instruction manual available Transport dimensions (approx. dimensions): L: 205 cm W: 100 cm H: 120 cm approx. 1,000 kg Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

With milling stop, fine stop, left/right run, 4000-7000 rpm

SPECIFICATIONS: Dimensions of the work table mm: 2,000 x 1,000 With hydraulic drive

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.