We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
AGIECUT CLASSIC 2S wire cutter 2004 AGIECUT CLASSIC 2S
used
Stock Number: 3810 CNC WIRE EROSION MACHINE Manufacturer: AGIECUT, Type: CLASSIC 2S Machine NO.: 386-C32.102, Year of manufacture: 2003 Specifications: Size workpiece dimensions 350 x 250 x 256 mm Size workpiece weight 250 kg Longitudinal movement (X) 350 mm Transverse movement (Y) 250 mm Vertical movement (Z) 256 mm U Travel U/B Axis +/- 70 mm mm Length: 2040 mm, Height: 2220 mm, Width: 1640 mm, Weight: 2580 kg
used
Stock Number: 3811 CNC WIRE EROSION MACHINE Manufacturer: AGIECUT, Type: CLASSIC 2S Machine NO.: 249-C32.101, Year of manufacture: 2001 Specifications: Size workpiece dimensions 350 x 250 x 256 mm Max. tool weight 250 kg Longitudinal movement (X) 350 mm Transverse movement (Y) 250 mm Vertical movement (Z) 256 mm U Travel U/B Axis +/- 70 mm mm Length: 2040 mm, Height: 2200 mm, Width: 1640 mm, Weight: 2680 kg
used
AGIECUT Progress V2 Year of construction: 2007 Control: AGIE Travels (X/Y/Z): 350x250x256mm max. workpiece dimensions: 750x550x250mm max. workpiece weight: 200kg (in bath) / 450kg (without bath) max. cutting rate: 500mm²/min Operating hours: approx. 63.200h EDM hours: approx. 15,500h Dimensions: approx. 1.7x2.05x2.22m Weight: approx. 2.6 tons The machine was serviced in November 2022 and the geometry was measured. It is in very good condition.
used
Agiecut Challenge 2 Wire EDM year 2001 - CE marked used machine in excellent working condition
used
AGIE CHARMILLES wire cut AC2 VERTEX year `2010
used
AGIETRON HYPERSPARK 2 HS Sinker 2008 Design with lowerable working container Work table with 50 mm hole grid travel X/Y/Z 350x250x350 mm -Workpiece size: LxWxH=650x580x250 mm or 820x420x250 mm Integrated C axis, for rotation, indexing and erosion Electronic laser measurement of all axes Detection of the electrode and workpiece position 1 set of documentation (CD + manuals) AGIEVISION 5 Control with multitasking DNC interface with transmission protocolXon/Xoff and LSV2 2 serial interfaces RS 232C for DNC and master computer LAN connection for data exchange via in-house network RJ45 3 drives: hard drive, 3 1/2" floppy disks, CD-ROM Without tool changer
used
AGIETRON IMPACT 2, built in 2002 AGIEVISION Control Travel: X = 350 mm, Y = 250 mm, Z = 350 mm Max workpiece dimensions (L x W x H): 650 x 580 x 250 mm x 820 x 420 x 250 mm Max workpiece weight: 400 kg Distance table to pinole: 170-520 mm Pinole with automatic chuck Mecatool Including Astrol electrode and pallet changer Working container can be reslid for optimum accessibility; Incl. C-axis for rotation, indexing and erosion (U=0-60 rpm); AGIE IPG high-performance generator with 72 A Removal rate copper/steel: 450 mm3/min Removal rate graphite/steel: 530 mm3/min Best achievable surface Ra 0.2 microns 10.4" LCD color screen, lifting keyboard and mouse, JOGBOX for the axis process 2r90di Machine weight (net): 3200 kg Machine dimensions (L x W x H): 2689 x 1855 x 2593 mm
used
Inv. Num. : 6319 Type: AGIETRON HYPERSPARK Producer: AGIE Created: 2006 Parameters: Control system: AGIEVISION Operating hours: 69006 h Switch-on hours: 31080 h Table dimensions: 600 x 450 mm Travel length of the X-axis: 350 mm Travel length of the Y-axis: 250 mm Travel length of the Z-axis: 350 mm Maximum table load: 400 kg Container size: 860 x 620 mm Equipment: Clamping solenoid 3x electrode holder Cooler Dielectric 8x dielectric filter Erowa clamping head
used
Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Operating hours: 12000 Technical data Working table: Length: 680 mm Width: 450 mm Max. dimensions of work piece: Length: 1000 mm Width: 550 mm Height: 220 mm Table load max.: 750 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 220 mm Vertical travel (Z axis): 220 mm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Max. cutting speed with wire 0.33 mm: 400 mm2/min Total power required: 10 kVA Dielectric aggregate: Contents: 760 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 12 kVA Weight total installation approx.: 2100 kg Overall dimensions machine: Length: 2050 mm Width: 2020 mm Height: 2000 mm Various accessories: Cooling unit for fluttines
used
AGIE AGIETRON 100 C Tool Change 16 positions Control on axes + axis C
used
AGIE AGIETRON 200 C Dimension table 800 x 630 mm working tank (internal size) 1070 x 740 x H. 420 mm Max size piece 1000 x 700 x H. 320 mm Axis X 500 mm | Y 350 mm | Z 500 mm Rapid speeds 720 mm
used
Spark Erosion Machine AGIE AGIETRON 250C used machine in excellent condition tool change 24 positions
used
This AGIE AGIEMATIC + AGIEPULS 60 HSF erosion machine was made in the year 2000. It is equipped with an Agie control unit. The machine has a table of 600 x 450 mm.
used
This AGIE AGIETRON INTEGRAL 3 EDM Wire Cutting Machine was built in the year 1998. The machine has a table of 800 x 600 mm.
used
This Agie Agietron Integral 2 Erosion machine was manufactured in Switzerland in 1994. It operates for a max. workpiece weight of 400 kg and max. electrode weight of 100 kg.
used
This 3-axis AGIE AGIECUT CLASSIC S erosion machine was manufactured in 2000. It has impressive axis movements with x=350mm, y=250mm, and z=256mm, providing ample flexibility for handling erosion tasks. The machine accommodates a maximum piece size of 750mm in length, 550mm in width, and 250mm in height, and it can manage weights up to 200kg. The dimensions and capabilities make it suitable for a wide range of erosion processes, ensuring detailed and precise outcomes. The AGIE AGIECUT CLASSIC S machine we have for sale is designed for robust performance and precision. Contact us for more information about this erosion machine.
used
Machine is in very good condition X : 600 mm Y : 400 mm Z : 350 mm
used
Agie Charmilles CUT30P EDM Wire Cutting Machine Axis movement: X, Y, Z : 600 x 400 x 350 mm Maximum workpiece size : X, Y, Z 1050 x 800 x 350 mm
used
X axis (longitudinal) 400 mm Y axis (transverse) 250 mm Z axis (vertical) 256 mm Max length of the piece 860 mm Max workpiece width 580 mm Maximum workpiece weight 850 kg Type of the CN Agiematic Length of the tank 810 mm Width of the tank 580 mm Height of the tank 250 mm Max height of the piece 250 mm Automatic threading Yes Weight approx. in kg. 2350
used
Agie Agietron Integral 3 EDM Wire Cutting Machine X/Y/Z : 500/350/500 Work tank dimensions (mm) X/Y/Z- 860/620//350 Work table dimensions (mm) 800 x 600 Max work piece weight 800 kg Max. electrode weight 200 kg 28 Head Tool Change Generator power 90 A
used
max. workpiece dimensions length x width x height 750 x 550 x 250 mm X / Y / Z axes 350 / 250 / 256 mm
used
X-Axis travel 350 mm Y-Axis travel 250 mm Z-Axis travel 300 mm X-Y-Z axes speed 6 - 6 - 15 m/min Table length 500 mm Table width 400 mm Work tank size 790 x 530 x 350 mm Workpiece weight 500 kg Linear tool changer 4 (Std. tooling) / 5 (Combi tooling) Rotary tool changer 16-80 pos. (Std. tooling) / 32-160 pos. (Combi tooling) Dimensions L 1900 x W 1690 x H 2398 mm Weight 2800 kg
used
Technical details x-way 350 mm y-way 250 mm z-way 256 mm Max. Workpiece dimensions 750 x 550 x 250 mm U-axis +/- 70 mm V-axis +/- 70 mm Rapid traverse X / Y / Z axis 1.5 / 1.5 / 0.6 m / min Rapid traverse U / V-axis 0.6 m / min Max. Taper 30 ° / 100 mm control AGIEVISION Wire diameter 0.1 - 0.33 mm Wire speed 60-300 mm / sec Wire feeder semi-automatic Total power requirement 9.1 kVA Machine weight approx. 3.6 t Dimensions L x W x H 2.21 x 2.21 x 2.22 m
used
x-travel: 350 mm y-travel: 250 mm z-travel: 256 mm max. size of workpiece: 750 x 550 x 250 mm U-axis: +/- 70 mm V-axis: +/- 70 mm rapid traverse X/Y/Z axis: 1,5 / 1,5 / 0,6 m/min rapid traverse U/V-axis: 0,6 m/min max. concentricity: 30° / 100 mm control: AGIEVISION wire dia.: 0,1 - 0,33 mm speed of wire: 60 - 300 mm/sec wire retraction: halbautomatisch total power requirement: 9,1 kVA weight of the machine ca.: 3,6 t dimensions: 2,21 x 2,21 x 2,22 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.