used ACEC Direct current motors

2 x 750kW Motors with water Cooler available! Description attached!

Motor power: 1400kW, rotational speed: 20-1000/min, weight: 6.1t, with cooling unit, the documentation is partially available, the machine needs overhauling.

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Manufacturer gearbox: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Manufacturer motor: Siemens, type 1 FT5072-OAFO1-2 / brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm // 3000 rpm -Hollow shaft: Ø 38 x 125 mm -Shaft: Ø 16 x 40 mm -Dimensions: 540/275 / H230 mm -Weight: 29 kg

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Manufacturer gearbox north type: M50B -Engine type: 90L4GMFTG -Speed: 3000/150 rpm -Gear: 1:20 -Power: 1.5 kW -Construction: angle -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: 610/230/H235 mm -Weight: 31 kg

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Manufacturer gearbox Sigl type: 65.1GE/SP126 -Manufacturer Motor Sigl Type: G1250 NM100 TDG 60-10 B14 -Speed: 14 rpm adjustable -Power: 1.25 kW -Construction: angle -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 660/192/H250 mm -Weight: 38 kg

Swivel part ingenous from Walter type HU 150E Peak height is 150mm. Direct divisions via perforated disc possible. Division 1 -24 Haohtcz Indirect sharing is no longer possible, a worm wheel is missing. Use on fraes and drilling machines For more information on request, please note the photos. Special price

Gebhardt RLM 56-8090 centrifugal fan with direct drive Direct drive in accuracy class 1: The RLM series Gebhardt remains true to its concept and can thus set accents in the field of free-wheeling wheels This makes the free-running wheel an integral strategic component of Gebhardt's "direct-drive fans" fan range - Aerodynamically and acoustically optimized - Pressure increase of 2000 Pa achievable in the optimum range - Optimum motor utilization due to adapted impeller strength - Short overall length, compact module - Low wheel weight and resulting low load on the engine mounts - Precise volume flow measuring device standard Specifications RLM intravent RLM 56-8090-4D-28HA1A Centrifugal fan with direct drive 905 mm impeller diameter free-running wheel one-sided suction 6 Number of scoops 8.4 kgm² moment of inertia 74.0 kg Mass Impeller 1.20 kg/m³ ...

Gebhardt RLM 56-8090 centrifugal fan with direct drive Direct drive in accuracy class 1: The RLM series Gebhardt remains true to its concept and can thus set accents in the field of free-wheeling wheels This makes the free-running wheel an integral strategic component of Gebhardt's "direct-drive fans" fan range - Aerodynamically and acoustically optimized - Pressure increase of 2000 Pa achievable in the optimum range - Optimum motor utilization due to adapted impeller strength - Short overall length, compact module - Low wheel weight and resulting low load on the engine mounts - Precise volume flow measuring device standard Specifications RLM intravent RLM 56-8090-4D-28HA1A Centrifugal fan with direct drive 905 mm impeller diameter free-running wheel one-sided suction 6 Number of scoops 8.4 kgm² moment of inertia 74.0 kg Mass Impeller 1.20 kg/m³ ...

Gebhardt RLM 56-8090 centrifugal fan with direct drive Direct drive in accuracy class 1: The RLM series Gebhardt remains true to its concept and can thus set accents in the field of free-wheeling wheels This makes the free-running wheel an integral strategic component of Gebhardt's "direct-drive fans" fan range - Aerodynamically and acoustically optimized - Pressure increase of 2000 Pa achievable in the optimum range - Optimum motor utilization due to adapted impeller strength - Short overall length, compact module - Low wheel weight and resulting low load on the engine mounts - Precise volume flow measuring device standard Specifications RLM intravent RLM 56-8090-4D-28HA1A Centrifugal fan with direct drive 905 mm impeller diameter free-running wheel one-sided suction 6 Number of scoops 8.4 kgm² moment of inertia 74.0 kg Mass Impeller 1.20 kg/m³ ...

Gebhardt RLM 56-8090 centrifugal fan with direct drive Direct drive in accuracy class 1: The RLM series Gebhardt remains true to its concept and can thus set accents in the field of free-wheeling wheels This makes the free-running wheel an integral strategic component of Gebhardt's "direct-drive fans" fan range - Aerodynamically and acoustically optimized - Pressure increase of 2000 Pa achievable in the optimum range - Optimum motor utilization due to adapted impeller strength - Short overall length, compact module - Low wheel weight and resulting low load on the engine mounts - Precise volume flow measuring device standard Specifications RLM intravent RLM 56-8090-4D-28HA1A Centrifugal fan with direct drive 905 mm impeller diameter free-running wheel one-sided suction 6 Number of scoops 8.4 kgm² moment of inertia 74.0 kg Mass Impeller 1.20 kg/m³ ...

Clamping head VEB Vorrichtungsbau WeißENFELS Type G2 Direct dividing apparatus, partial head, dividing apparatus with collet holder Order No: 31202 Fixture No: TGL 30-07101 Collet holder 163E Height 140 mm Through hole 28 mm Clamping surface 265 x 165 mm - Index detent from 0 to 180 every 15 (12x)- Index detent from 180 to 360 every 45 (4x) - Collet set with 16 pieces Compression collets type 163E - 12 pieces Collets round 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 mm- 3 pieces Collet hexagon 8 / 10 / 14 mm- 1 piece collet square 12 mm- clamping surface with 20 mm guide groove Dimension dividing apparatus L x W x H 265 x 230 x 140 mm Weight: kg good condition; used

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

LPKF Fusion 3D 1500

LPKF MicroLine 3D 160i

Machine control AUTOMATIONDIRECT, KOYO Direct Logic 205 1 x D2-09BDC1-1 1 x DL250-1 CPU, 1x 32CDD-R 1 x D2-16ND3-2, 1x D2-16TD2-2 2 x F2-08AD-1, 1x F2-08AD-2 1 x F2-02DA-2, 1x F2-04THM 12 - 24 V 25 W used, tested ! Dimensions: 360 x 95 x 95 mm

Electronic Module, Machine Control KOYO, AUTOMATION DIREKT Direct LOGIC 205 Ethernetcotroler H2-EBC Digital Input Module D2-16ND3-2 -Digital Output Module D2-16TD2-2 Analog Input Module F2-08AD-2 Base Module D2-04BDC1-1 12 - 24 V DC 25 W used, tested ! Dimensions: 205 x 90 x 100 mm

Machine control AUTOMATIONDIRECT, KOYO Direct Logic 205 1 x D2-09BDC1-1 1 x DL260-1 CPU 2 x D2-16ND3-2 3 x D2-16TD2-2 1 x F2-08AD-1 1 x H2-ECOM100 1 x H2-ERM 12 - 24 V 25 W components also available !! used, tested ! Dimensions: 360 x 95 x 95 mm

Electronic Module, Machine Control KOYO, AUTOMATION DIREKT Direct LOGIC 205 ( LOGIC205 ) Ethernetcotroler H2-EBC Digital Input Module D2-16ND3-2 Digitaleses Output Module D2-16TD2-2 Analog Input / Output Module F2-4AD2DA Base Module D2-04BDC1-1 12 - 24 V DC 25 W used, tested ! Dimensions: 205 x 90 x 100 mm

Direct Starter, Standard Direct Starter SIEMENS DS1-X 3RK1301-0FB00-0AA2 ET 200S 0,35 - 0,5 A 0,12 kW 400 V used, tested ! Dimensions: 25 x 120 x 45 mm

Direct Starter, Standard Direct Starter SIEMENS DS1-X 3RK1301-0HB00-0AA2 ET 200S 0,55 - 0,8 A 0,21 kW 400 V used, tested ! Dimensions: 25 x 120 x 45 mm

Direct starter, standard direct starter SIEMENS DS1-X 3RK1301-0BB00-0AA2 ET 200S 0,14 - 0,2 A 0,06 kW 400 V used, tested ! Dimensions: 25 x 120 x 45 mm

Direct Starter, Standard Direct Starter SIEMENS DS1-X 3RK1301-0DB00-0AA2 ET 200S 0,22 - 0,32 A 0,09 kW 400 V used, tested ! Dimensions: 25 x 120 x 45 mm

DESMA injection molding machine for direct injection of shoes. Injects PVC, TPR and TPU granules. 12 stations mean that 6 pairs of shoes are injected at the same time. The machine consists of a turntable (carousel), a hydraulic part, an injection unit and a control cabinet. The machine after the extensive renovation of the screw and cylinder and other wearing parts. The machine is in very good condition. Sn. 11-17706 We have 5 pieces of this machine and many more other machines from a shoe factory.

Description: Serial number: 60803191323, Model: 608SL, Type: 4134792Z, Year: unknown, presumably 2019, incl. Manual Location: A-9020 Klagenfurt Approx. Onsite Dimension. (l x w x h): 600 x 600 x 500 mm, weight approx.: 15 kg

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The workp ...